Dear Dave and Willie, and others!
Thanks for your assistance.
Anyway, furthermore I have to understand iptables more and more.
Thanks again.

askar

On 4/26/05, askar ... <[EMAIL PROTECTED]> wrote:
> On 4/26/05, askar ... <[EMAIL PROTECTED]> wrote:
> > On 4/26/05, Dave Nebinger < [EMAIL PROTECTED]> wrote:
> > > > > Well there's the indication of your problem.  Apparently your system
> > > > thinks
> > > > > that the packets coming in from eth0 need to go to ppp0 rather than
> > > > eth1.
> > Here I remembered words of gentoo howto guide 'Warning: When the DSL
> > interface comes up, it will create ppp0. Although your NIC is called
> > eth1, the IP is actually bound to ppp0. From now on, when you see
> > examples that utilize 'eth1', substitute with 'ppp0'. '.
> > Does it mean, in iptables settings instead of eth1 I had to put ppp0?
> >
> These 2 lines of gentoo howto guide:
> # iptables -A FORWARD -i eth1 -d 192.168.0.0/255.255.0.0 -j ACCEPT
> # iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE
> instead of eth1 I put ppp0. And now I can use the internet from WindowsBOX. :)
> Here I put the result of #iptables -L -v:
> Chain INPUT (policy ACCEPT 2827K packets, 4031M bytes)
>  pkts bytes target     prot opt in     out     source
> destination
>    92 27799 ACCEPT     all  --  lo     any     anywhere
> anywhere
>   115 25281 ACCEPT     all  --  eth0   any     anywhere
> anywhere
>     0     0 REJECT     udp  --  !eth0  any     anywhere
> anywhere            udp dpt:bootps reject-with icmp-port-unreachable
>     0     0 REJECT     udp  --  !eth0  any     anywhere
> anywhere            udp dpt:domain reject-with icmp-port-unreachable
>     0     0 DROP       tcp  --  !eth0  any     anywhere
> anywhere            tcp dpts:0:1023
>     0     0 DROP       udp  --  !eth0  any     anywhere
> anywhere            udp dpts:0:1023
>     0     0 ACCEPT     tcp  --  ppp0   any     anywhere
> anywhere            tcp dpt:ssh
>
> Chain FORWARD (policy DROP 764 packets, 33352 bytes)
>  pkts bytes target     prot opt in     out     source
> destination
>     0     0 DROP       all  --  eth0   any     anywhere
> 192.168.0.0/16
>   410 42004 ACCEPT     all  --  eth0   any     192.168.0.0/16
> anywhere
>   453  199K ACCEPT     all  --  ppp0   any     anywhere
> 192.168.0.0/16
>
> Chain OUTPUT (policy ACCEPT 3985K packets, 3831M bytes)
>  pkts bytes target     prot opt in     out     source               destination
>
> askar
>

Reply via email to