> From your dmesg output, it looks like you have some kind of hardware > problem. Have you double checked that your cabling and hardware > configuration is good? Some things to check: > > 1. That the burner is jumpered correctly for 'master'.
Done/ > 2. The IDE cable is not damaged (you might just want to replace it with > a spare, if you have one). Replaced it. > 3. The IDE cable is not more than 18" long. I think this one is really > really really critical. See above. > 4. If you have another device on the same channel, make sure it is > configured as a slave. Done. > 5. If 4 is true and the other device is a HD, the HD should be hdc and > the burner hdd. And an 80-conductor cable would be required in this case > I think. > > Your dmesg output didn't show the IDE device configuration messages from > when the kernel booted..too many IDE errors. Maybe you can reboot and > post a basic dmesg output? http://phpfi.com/58626 But of course. -- gentoo-user@gentoo.org mailing list
