commit: 84307da6e74a53fbe45d0bad395f4984729298a4
Author: Patrick McLean <chutzpah <AT> gentoo <DOT> org>
AuthorDate: Fri Jul 24 21:12:19 2020 +0000
Commit: Patrick McLean <chutzpah <AT> gentoo <DOT> org>
CommitDate: Fri Jul 24 21:12:19 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=84307da6
net-misc/openssh: remove unused patches and old version
Package-Manager: Portage-3.0.0, Repoman-2.3.23
Signed-off-by: Patrick McLean <chutzpah <AT> gentoo.org>
.../files/openssh-8.2_p1-X509-12.4.2-tests.patch | 11 -
.../files/openssh-8.2_p1-X509-glue-12.4.2.patch | 129 ------
net-misc/openssh/openssh-8.3_p1-r2.ebuild | 492 ---------------------
3 files changed, 632 deletions(-)
diff --git a/net-misc/openssh/files/openssh-8.2_p1-X509-12.4.2-tests.patch
b/net-misc/openssh/files/openssh-8.2_p1-X509-12.4.2-tests.patch
deleted file mode 100644
index 1c58d0d5d82..00000000000
--- a/net-misc/openssh/files/openssh-8.2_p1-X509-12.4.2-tests.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/openbsd-compat/regress/Makefile.in 2020-02-15 10:59:01.210601434
-0700
-+++ b/openbsd-compat/regress/Makefile.in 2020-02-15 10:59:18.753485852
-0700
-@@ -7,7 +7,7 @@
- CC=@CC@
- LD=@LD@
- CFLAGS=@CFLAGS@
--CPPFLAGS=-I. -I.. -I$(srcdir) -I$(srcdir)/.. @CPPFLAGS@ @DEFS@
-+CPPFLAGS=-I. -I.. -I../.. -I$(srcdir) -I$(srcdir)/.. @CPPFLAGS@ @DEFS@
- EXEEXT=@EXEEXT@
- LIBCOMPAT=../libopenbsd-compat.a
- LIBS=@LIBS@
diff --git a/net-misc/openssh/files/openssh-8.2_p1-X509-glue-12.4.2.patch
b/net-misc/openssh/files/openssh-8.2_p1-X509-glue-12.4.2.patch
deleted file mode 100644
index 90a5d5a660f..00000000000
--- a/net-misc/openssh/files/openssh-8.2_p1-X509-glue-12.4.2.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-diff --exclude '*.un~' -ubr a/openssh-8.2p1+x509-12.4.2.diff
b/openssh-8.2p1+x509-12.4.2.diff
---- a/openssh-8.2p1+x509-12.4.2.diff 2020-02-23 12:25:17.296737805 -0800
-+++ b/openssh-8.2p1+x509-12.4.2.diff 2020-02-23 12:26:25.347779673 -0800
-@@ -39236,16 +39236,15 @@
-
- install: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files install-sysconf
host-key check-config
- install-nokeys: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files
install-sysconf
--@@ -378,6 +379,8 @@
-+@@ -378,6 +379,7 @@
- $(MKDIR_P) $(DESTDIR)$(mandir)/$(mansubdir)5
- $(MKDIR_P) $(DESTDIR)$(mandir)/$(mansubdir)8
- $(MKDIR_P) $(DESTDIR)$(libexecdir)
- + $(MKDIR_P) $(DESTDIR)$(sshcadir)
--+ $(MKDIR_P) $(DESTDIR)$(piddir)
- $(MKDIR_P) -m 0755 $(DESTDIR)$(PRIVSEP_PATH)
- $(INSTALL) -m 0755 $(STRIP_OPT) ssh$(EXEEXT)
$(DESTDIR)$(bindir)/ssh$(EXEEXT)
- $(INSTALL) -m 0755 $(STRIP_OPT) scp$(EXEEXT)
$(DESTDIR)$(bindir)/scp$(EXEEXT)
--@@ -386,11 +389,14 @@
-+@@ -386,11 +388,14 @@
- $(INSTALL) -m 0755 $(STRIP_OPT) ssh-keygen$(EXEEXT)
$(DESTDIR)$(bindir)/ssh-keygen$(EXEEXT)
- $(INSTALL) -m 0755 $(STRIP_OPT) ssh-keyscan$(EXEEXT)
$(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT)
- $(INSTALL) -m 0755 $(STRIP_OPT) sshd$(EXEEXT)
$(DESTDIR)$(sbindir)/sshd$(EXEEXT)
-@@ -39264,7 +39263,7 @@
- $(INSTALL) -m 644 ssh.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1
- $(INSTALL) -m 644 scp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1
- $(INSTALL) -m 644 ssh-add.1.out
$(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1
--@@ -400,12 +406,12 @@
-+@@ -400,12 +405,12 @@
- $(INSTALL) -m 644 moduli.5.out
$(DESTDIR)$(mandir)/$(mansubdir)5/moduli.5
- $(INSTALL) -m 644 sshd_config.5.out
$(DESTDIR)$(mandir)/$(mansubdir)5/sshd_config.5
- $(INSTALL) -m 644 ssh_config.5.out
$(DESTDIR)$(mandir)/$(mansubdir)5/ssh_config.5
-@@ -39278,7 +39277,7 @@
-
- install-sysconf:
- $(MKDIR_P) $(DESTDIR)$(sysconfdir)
--@@ -463,10 +469,9 @@
-+@@ -463,10 +468,9 @@
- -rm -f $(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT)
- -rm -f $(DESTDIR)$(bindir)/sftp$(EXEEXT)
- -rm -f $(DESTDIR)$(sbindir)/sshd$(EXEEXT)
-@@ -39292,7 +39291,7 @@
- -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1
- -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1
- -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1
--@@ -478,7 +483,6 @@
-+@@ -478,7 +482,6 @@
- -rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8
- -rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-keysign.8
- -rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-pkcs11-helper.8
-@@ -39300,7 +39299,7 @@
-
- regress-prep:
- $(MKDIR_P) `pwd`/regress/unittests/test_helper
--@@ -491,11 +495,11 @@
-+@@ -491,11 +494,11 @@
- $(MKDIR_P) `pwd`/regress/unittests/match
- $(MKDIR_P) `pwd`/regress/unittests/utf8
- $(MKDIR_P) `pwd`/regress/misc/kexfuzz
-@@ -39314,7 +39313,7 @@
-
- regress/modpipe$(EXEEXT): $(srcdir)/regress/modpipe.c $(REGRESSLIBS)
- $(CC) $(CFLAGS) $(CPPFLAGS) -o $@ $(srcdir)/regress/modpipe.c \
--@@ -546,8 +550,7 @@
-+@@ -546,8 +549,7 @@
- regress/unittests/sshkey/tests.o \
- regress/unittests/sshkey/common.o \
- regress/unittests/sshkey/test_file.o \
-@@ -39344,7 +39343,7 @@
-
- regress/unittests/hostkeys/test_hostkeys$(EXEEXT): \
- ${UNITTESTS_TEST_HOSTKEYS_OBJS} \
--@@ -618,35 +619,18 @@
-+@@ -618,35 +618,18 @@
- -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS)
-
- MISC_KEX_FUZZ_OBJS=\
-@@ -39382,7 +39381,7 @@
- regress/unittests/sshbuf/test_sshbuf$(EXEEXT) \
- regress/unittests/sshkey/test_sshkey$(EXEEXT) \
- regress/unittests/bitmap/test_bitmap$(EXEEXT) \
--@@ -657,36 +641,29 @@
-+@@ -657,36 +640,29 @@
- regress/unittests/utf8/test_utf8$(EXEEXT) \
- regress/misc/kexfuzz/kexfuzz$(EXEEXT)
-
-@@ -39439,7 +39438,7 @@
- TEST_SSH_IPV6="@TEST_SSH_IPV6@" ; \
- TEST_SSH_UTF8="@TEST_SSH_UTF8@" ; \
- TEST_SSH_ECC="@TEST_SSH_ECC@" ; \
--@@ -708,8 +685,6 @@
-+@@ -708,8 +684,6 @@
- TEST_SSH_SSHPKCS11HELPER="$${TEST_SSH_SSHPKCS11HELPER}" \
- TEST_SSH_SSHKEYSCAN="$${TEST_SSH_SSHKEYSCAN}" \
- TEST_SSH_SFTP="$${TEST_SSH_SFTP}" \
-@@ -39448,7 +39447,7 @@
- TEST_SSH_SFTPSERVER="$${TEST_SSH_SFTPSERVER}" \
- TEST_SSH_PLINK="$${TEST_SSH_PLINK}" \
- TEST_SSH_PUTTYGEN="$${TEST_SSH_PUTTYGEN}" \
--@@ -717,17 +692,35 @@
-+@@ -717,17 +691,35 @@
- TEST_SSH_IPV6="$${TEST_SSH_IPV6}" \
- TEST_SSH_UTF8="$${TEST_SSH_UTF8}" \
- TEST_SSH_ECC="$${TEST_SSH_ECC}" \
-@@ -39487,7 +39486,7 @@
-
- survey: survey.sh ssh
- @$(SHELL) ./survey.sh > survey
--@@ -743,4 +736,8 @@
-+@@ -743,4 +735,8 @@
- sh buildpkg.sh; \
- fi
-
-@@ -98042,16 +98041,6 @@
- + return mbtowc(NULL, s, n);
- +}
- +#endif
--diff -ruN openssh-8.2p1/version.h openssh-8.2p1+x509-12.4.2/version.h
----- openssh-8.2p1/version.h 2020-02-14 02:40:54.000000000 +0200
--+++ openssh-8.2p1+x509-12.4.2/version.h 2020-02-23 11:07:00.000000000
+0200
--@@ -2,5 +2,4 @@
--
-- #define SSH_VERSION "OpenSSH_8.2"
--
---#define SSH_PORTABLE "p1"
---#define SSH_RELEASE SSH_VERSION SSH_PORTABLE
--+#define SSH_RELEASE PACKAGE_STRING ", " SSH_VERSION "p1"
- diff -ruN openssh-8.2p1/version.m4 openssh-8.2p1+x509-12.4.2/version.m4
- --- openssh-8.2p1/version.m4 1970-01-01 02:00:00.000000000 +0200
- +++ openssh-8.2p1+x509-12.4.2/version.m4 2020-02-23 11:07:00.000000000
+0200
diff --git a/net-misc/openssh/openssh-8.3_p1-r2.ebuild
b/net-misc/openssh/openssh-8.3_p1-r2.ebuild
deleted file mode 100644
index 80dc7c3cd59..00000000000
--- a/net-misc/openssh/openssh-8.3_p1-r2.ebuild
+++ /dev/null
@@ -1,492 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-inherit user-info flag-o-matic multilib autotools pam systemd toolchain-funcs
-
-# Make it more portable between straight releases
-# and _p? releases.
-PARCH=${P/_}
-
-# PV to USE for HPN patches
-#HPN_PV="${PV^^}"
-HPN_PV="8.1_P1"
-
-HPN_VER="14.20"
-HPN_PATCHES=(
- ${PN}-${HPN_PV/./_}-hpn-DynWinNoneSwitch-${HPN_VER}.diff
- ${PN}-${HPN_PV/./_}-hpn-AES-CTR-${HPN_VER}.diff
- ${PN}-${HPN_PV/./_}-hpn-PeakTput-${HPN_VER}.diff
-)
-
-SCTP_VER="1.2" SCTP_PATCH="${PARCH}-sctp-${SCTP_VER}.patch.xz"
-X509_VER="12.5.1" X509_PATCH="${PARCH}+x509-${X509_VER}.diff.gz"
-
-DESCRIPTION="Port of OpenBSD's free SSH release"
-HOMEPAGE="https://www.openssh.com/";
-SRC_URI="mirror://openbsd/OpenSSH/portable/${PARCH}.tar.gz
- ${SCTP_PATCH:+sctp? (
https://dev.gentoo.org/~chutzpah/dist/openssh/${SCTP_PATCH} )}
- ${HPN_VER:+hpn? ( $(printf
"mirror://sourceforge/hpnssh/HPN-SSH%%20${HPN_VER/./v}%%20${HPN_PV/_P/p}/%s\n"
"${HPN_PATCHES[@]}") )}
- ${X509_PATCH:+X509? (
https://roumenpetrov.info/openssh/x509-${X509_VER}/${X509_PATCH} )}
-"
-S="${WORKDIR}/${PARCH}"
-
-LICENSE="BSD GPL-2"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv
~s390 ~sparc ~x86 ~ppc-aix ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos
~x64-macos ~x86-macos ~m68k-mint ~sparc-solaris ~sparc64-solaris ~x64-solaris
~x86-solaris"
-# Probably want to drop ssl defaulting to on in a future version.
-IUSE="abi_mips_n32 audit bindist debug hpn kerberos kernel_linux ldns libedit
libressl livecd pam +pie sctp security-key selinux +ssl static test X X509 xmss"
-
-RESTRICT="!test? ( test )"
-
-REQUIRED_USE="
- ldns? ( ssl )
- pie? ( !static )
- static? ( !kerberos !pam )
- X509? ( !sctp !security-key ssl !xmss )
- xmss? ( || ( ssl libressl ) )
- test? ( ssl )
-"
-
-LIB_DEPEND="
- audit? ( sys-process/audit[static-libs(+)] )
- ldns? (
- net-libs/ldns[static-libs(+)]
- !bindist? ( net-libs/ldns[ecdsa,ssl(+)] )
- bindist? ( net-libs/ldns[-ecdsa,ssl(+)] )
- )
- libedit? ( dev-libs/libedit:=[static-libs(+)] )
- sctp? ( net-misc/lksctp-tools[static-libs(+)] )
- security-key? ( >=dev-libs/libfido2-1.4.0:=[static-libs(+)] )
- selinux? ( >=sys-libs/libselinux-1.28[static-libs(+)] )
- ssl? (
- !libressl? (
- || (
- (
- >=dev-libs/openssl-1.0.1:0[bindist=]
- <dev-libs/openssl-1.1.0:0[bindist=]
- )
- >=dev-libs/openssl-1.1.0g:0[bindist=]
- )
- dev-libs/openssl:0=[static-libs(+)]
- )
- libressl? ( dev-libs/libressl:0=[static-libs(+)] )
- )
- virtual/libcrypt:=[static-libs(+)]
- >=sys-libs/zlib-1.2.3:=[static-libs(+)]
-"
-RDEPEND="
- acct-group/sshd
- acct-user/sshd
- !static? ( ${LIB_DEPEND//\[static-libs(+)]} )
- pam? ( sys-libs/pam )
- kerberos? ( virtual/krb5 )
-"
-DEPEND="${RDEPEND}
- static? ( ${LIB_DEPEND} )
- virtual/os-headers
-"
-RDEPEND="${RDEPEND}
- pam? ( >=sys-auth/pambase-20081028 )
- userland_GNU? ( !prefix? ( sys-apps/shadow ) )
- X? ( x11-apps/xauth )
-"
-BDEPEND="
- virtual/pkgconfig
- sys-devel/autoconf
-"
-
-pkg_pretend() {
- # this sucks, but i'd rather have people unable to `emerge -u openssh`
- # than not be able to log in to their server any more
- maybe_fail() { [[ -z ${!2} ]] && echo "$1" ; }
- local fail="
- $(use hpn && maybe_fail hpn HPN_VER)
- $(use sctp && maybe_fail sctp SCTP_PATCH)
- $(use X509 && maybe_fail X509 X509_PATCH)
- "
- fail=$(echo ${fail})
- if [[ -n ${fail} ]] ; then
- eerror "Sorry, but this version does not yet support features"
- eerror "that you requested: ${fail}"
- eerror "Please mask ${PF} for now and check back later:"
- eerror " # echo '=${CATEGORY}/${PF}' >>
/etc/portage/package.mask"
- die "booooo"
- fi
-
- # Make sure people who are using tcp wrappers are notified of its
removal. #531156
- if grep -qs '^ *sshd *:' "${EROOT}"/etc/hosts.{allow,deny} ; then
- ewarn "Sorry, but openssh no longer supports tcp-wrappers, and
it seems like"
- ewarn "you're trying to use it. Update your
${EROOT}/etc/hosts.{allow,deny} please."
- fi
-}
-
-src_prepare() {
- sed -i \
- -e
"/_PATH_XAUTH/s:/usr/X11R6/bin/xauth:${EPREFIX}/usr/bin/xauth:" \
- pathnames.h || die
-
- # don't break .ssh/authorized_keys2 for fun
- sed -i '/^AuthorizedKeysFile/s:^:#:' sshd_config || die
-
- eapply "${FILESDIR}"/${PN}-7.9_p1-include-stdlib.patch
- eapply "${FILESDIR}"/${PN}-8.2_p1-GSSAPI-dns.patch #165444 integrated
into gsskex
- eapply "${FILESDIR}"/${PN}-6.7_p1-openssl-ignore-status.patch
- eapply "${FILESDIR}"/${PN}-7.5_p1-disable-conch-interop-tests.patch
- eapply "${FILESDIR}"/${PN}-8.0_p1-fix-putty-tests.patch
- eapply
"${FILESDIR}"/${PN}-8.0_p1-deny-shmget-shmat-shmdt-in-preauth-privsep-child.patch
-
- [[ -d ${WORKDIR}/patches ]] && eapply "${WORKDIR}"/patches
-
- local PATCHSET_VERSION_MACROS=()
-
- if use X509 ; then
- pushd "${WORKDIR}" &>/dev/null || die
- eapply "${FILESDIR}/${P}-X509-glue-"${X509_VER}".patch"
- popd &>/dev/null || die
-
- eapply "${WORKDIR}"/${X509_PATCH%.*}
-
- # We need to patch package version or any X.509 sshd will
reject our ssh client
- # with "userauth_pubkey: could not parse key: string is too
large [preauth]"
- # error
- einfo "Patching package version for X.509 patch set ..."
- sed -i \
- -e "s/^AC_INIT(\[OpenSSH\],
\[Portable\]/AC_INIT([OpenSSH], [${X509_VER}]/" \
- "${S}"/configure.ac || die "Failed to patch package
version for X.509 patch"
-
- einfo "Patching version.h to expose X.509 patch set ..."
- sed -i \
- -e "/^#define SSH_PORTABLE.*/a #define SSH_X509
\"-PKIXSSH-${X509_VER}\"" \
- "${S}"/version.h || die "Failed to sed-in X.509 patch
version"
- PATCHSET_VERSION_MACROS+=( 'SSH_X509' )
- fi
-
- if use sctp ; then
- eapply "${WORKDIR}"/${SCTP_PATCH%.*}
-
- einfo "Patching version.h to expose SCTP patch set ..."
- sed -i \
- -e "/^#define SSH_PORTABLE/a #define SSH_SCTP
\"-sctp-${SCTP_VER}\"" \
- "${S}"/version.h || die "Failed to sed-in SCTP patch
version"
- PATCHSET_VERSION_MACROS+=( 'SSH_SCTP' )
-
- einfo "Disabling know failing test (cfgparse) caused by SCTP
patch ..."
- sed -i \
- -e "/\t\tcfgparse \\\/d" \
- "${S}"/regress/Makefile || die "Failed to disable known
failing test (cfgparse) caused by SCTP patch"
- fi
-
- if use hpn ; then
- local hpn_patchdir="${T}/${P}-hpn${HPN_VER}"
- mkdir "${hpn_patchdir}" || die
- cp $(printf -- "${DISTDIR}/%s\n" "${HPN_PATCHES[@]}")
"${hpn_patchdir}" || die
- pushd "${hpn_patchdir}" &>/dev/null || die
- eapply "${FILESDIR}"/${P}-hpn-${HPN_VER}-glue.patch
- eapply "${FILESDIR}"/${PN}-8.2_p1-hpn-${HPN_VER}-libressl.patch
- if use X509; then
- # einfo "Will disable MT AES cipher due to incompatbility
caused by X509 patch set"
- # # X509 and AES-CTR-MT don't get along, let's just drop
it
- # rm openssh-${HPN_PV//./_}-hpn-AES-CTR-${HPN_VER}.diff
|| die
-
- eapply
"${FILESDIR}"/${PN}-8.2_p1-hpn-${HPN_VER}-X509-glue.patch
- fi
- use sctp && eapply
"${FILESDIR}"/${PN}-8.2_p1-hpn-${HPN_VER}-sctp-glue.patch
- popd &>/dev/null || die
-
- eapply "${hpn_patchdir}"
-
- use X509 || eapply
"${FILESDIR}/openssh-8.0_p1-hpn-version.patch"
-
- einfo "Patching Makefile.in for HPN patch set ..."
- sed -i \
- -e "/^LIBS=/ s/\$/ -lpthread/" \
- "${S}"/Makefile.in || die "Failed to patch Makefile.in"
-
- einfo "Patching version.h to expose HPN patch set ..."
- sed -i \
- -e "/^#define SSH_PORTABLE/a #define SSH_HPN
\"-hpn${HPN_VER//./v}\"" \
- "${S}"/version.h || die "Failed to sed-in HPN patch
version"
- PATCHSET_VERSION_MACROS+=( 'SSH_HPN' )
-
- if [[ -n "${HPN_DISABLE_MTAES}" ]] ; then
- einfo "Disabling known non-working MT AES cipher per
default ..."
-
- cat > "${T}"/disable_mtaes.conf <<- EOF
-
- # HPN's Multi-Threaded AES CTR cipher is currently
known to be broken
- # and therefore disabled per default.
- DisableMTAES yes
- EOF
- sed -i \
- -e "/^#HPNDisabled.*/r ${T}/disable_mtaes.conf"
\
- "${S}"/sshd_config || die "Failed to disabled
MT AES ciphers in sshd_config"
-
- sed -i \
- -e "/AcceptEnv.*_XXX_TEST$/a
\\\tDisableMTAES\t\tyes" \
- "${S}"/regress/test-exec.sh || die "Failed to
disable MT AES ciphers in test config"
- fi
- fi
-
- if use X509 || use sctp || use hpn ; then
- einfo "Patching sshconnect.c to use SSH_RELEASE in
send_client_banner() ..."
- sed -i \
- -e "s/PROTOCOL_MAJOR_2, PROTOCOL_MINOR_2,
SSH_VERSION/PROTOCOL_MAJOR_2, PROTOCOL_MINOR_2, SSH_RELEASE/" \
- "${S}"/sshconnect.c || die "Failed to patch
send_client_banner() to use SSH_RELEASE (sshconnect.c)"
-
- einfo "Patching sshd.c to use SSH_RELEASE in
sshd_exchange_identification() ..."
- sed -i \
- -e "s/PROTOCOL_MAJOR_2, PROTOCOL_MINOR_2,
SSH_VERSION/PROTOCOL_MAJOR_2, PROTOCOL_MINOR_2, SSH_RELEASE/" \
- "${S}"/sshd.c || die "Failed to patch
sshd_exchange_identification() to use SSH_RELEASE (sshd.c)"
-
- einfo "Patching version.h to add our patch sets to SSH_RELEASE
..."
- sed -i \
- -e "s/^#define SSH_RELEASE.*/#define SSH_RELEASE
SSH_VERSION SSH_PORTABLE ${PATCHSET_VERSION_MACROS[*]}/" \
- "${S}"/version.h || die "Failed to patch SSH_RELEASE
(version.h)"
- fi
-
- sed -i \
- -e "/#UseLogin no/d" \
- "${S}"/sshd_config || die "Failed to remove removed UseLogin
option (sshd_config)"
-
- eapply_user #473004
-
- # These tests are currently incompatible with PORTAGE_TMPDIR/sandbox
- sed -e '/\t\tpercent \\/ d' \
- -i regress/Makefile || die
-
- tc-export PKG_CONFIG
- local sed_args=(
- -e "s:-lcrypto:$(${PKG_CONFIG} --libs openssl):"
- # Disable PATH reset, trust what portage gives us #254615
- -e 's:^PATH=/:#PATH=/:'
- # Disable fortify flags ... our gcc does this for us
- -e 's:-D_FORTIFY_SOURCE=2::'
- )
-
- # The -ftrapv flag ICEs on hppa #505182
- use hppa && sed_args+=(
- -e '/CFLAGS/s:-ftrapv:-fdisable-this-test:'
- -e '/OSSH_CHECK_CFLAG_LINK.*-ftrapv/d'
- )
- # _XOPEN_SOURCE causes header conflicts on Solaris
- [[ ${CHOST} == *-solaris* ]] && sed_args+=(
- -e 's/-D_XOPEN_SOURCE//'
- )
- sed -i "${sed_args[@]}" configure{.ac,} || die
-
- eautoreconf
-}
-
-src_configure() {
- addwrite /dev/ptmx
-
- use debug && append-cppflags -DSANDBOX_SECCOMP_FILTER_DEBUG
- use static && append-ldflags -static
- use xmss && append-cflags -DWITH_XMSS
-
- local myconf=(
- --with-ldflags="${LDFLAGS}"
- --disable-strip
- --with-pid-dir="${EPREFIX}"$(usex kernel_linux '' '/var')/run
- --sysconfdir="${EPREFIX}"/etc/ssh
- --libexecdir="${EPREFIX}"/usr/$(get_libdir)/misc
- --datadir="${EPREFIX}"/usr/share/openssh
- --with-privsep-path="${EPREFIX}"/var/empty
- --with-privsep-user=sshd
- $(use_with audit audit linux)
- $(use_with kerberos kerberos5 "${EPREFIX}"/usr)
- # We apply the sctp patch conditionally, so can't pass
--without-sctp
- # unconditionally else we get unknown flag warnings.
- $(use sctp && use_with sctp)
- $(use_with ldns ldns "${EPREFIX}"/usr)
- $(use_with libedit)
- $(use_with pam)
- $(use_with pie)
- $(use_with selinux)
- $(usex X509 '' "$(use_with security-key security-key-builtin)")
- $(use_with ssl openssl)
- $(use_with ssl md5-passwords)
- $(use_with ssl ssl-engine)
- $(use_with !elibc_Cygwin hardening) #659210
- )
-
- # stackprotect is broken on musl x86 and ppc
- use elibc_musl && ( use x86 || use ppc ) && myconf+=(
--without-stackprotect )
-
- # The seccomp sandbox is broken on x32, so use the older method for
now. #553748
- use amd64 && [[ ${ABI} == "x32" ]] && myconf+=( --with-sandbox=rlimit )
-
- econf "${myconf[@]}"
-}
-
-src_test() {
- local t skipped=() failed=() passed=()
- local tests=( interop-tests compat-tests )
-
- local shell=$(egetshell "${UID}")
- if [[ ${shell} == */nologin ]] || [[ ${shell} == */false ]] ; then
- elog "Running the full OpenSSH testsuite requires a usable
shell for the 'portage'"
- elog "user, so we will run a subset only."
- skipped+=( tests )
- else
- tests+=( tests )
- fi
-
- # It will also attempt to write to the homedir .ssh.
- local sshhome=${T}/homedir
- mkdir -p "${sshhome}"/.ssh
- for t in "${tests[@]}" ; do
- # Some tests read from stdin ...
- HOMEDIR="${sshhome}" HOME="${sshhome}" TMPDIR="${T}" \
- SUDO="" SSH_SK_PROVIDER="" \
- TEST_SSH_UNSAFE_PERMISSIONS=1 \
- emake -k -j1 ${t} </dev/null \
- && passed+=( "${t}" ) \
- || failed+=( "${t}" )
- done
-
- einfo "Passed tests: ${passed[*]}"
- [[ ${#skipped[@]} -gt 0 ]] && ewarn "Skipped tests: ${skipped[*]}"
- [[ ${#failed[@]} -gt 0 ]] && die "Some tests failed: ${failed[*]}"
-}
-
-# Gentoo tweaks to default config files.
-tweak_ssh_configs() {
- local locale_vars=(
- # These are language variables that POSIX defines.
- #
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html#tag_08_02
- LANG LC_ALL LC_COLLATE LC_CTYPE LC_MESSAGES LC_MONETARY
LC_NUMERIC LC_TIME
-
- # These are the GNU extensions.
- #
https://www.gnu.org/software/autoconf/manual/html_node/Special-Shell-Variables.html
- LANGUAGE LC_ADDRESS LC_IDENTIFICATION LC_MEASUREMENT LC_NAME
LC_PAPER LC_TELEPHONE
- )
-
- # First the server config.
- cat <<-EOF >> "${ED}"/etc/ssh/sshd_config
-
- # Allow client to pass locale environment variables. #367017
- AcceptEnv ${locale_vars[*]}
-
- # Allow client to pass COLORTERM to match TERM. #658540
- AcceptEnv COLORTERM
- EOF
-
- # Then the client config.
- cat <<-EOF >> "${ED}"/etc/ssh/ssh_config
-
- # Send locale environment variables. #367017
- SendEnv ${locale_vars[*]}
-
- # Send COLORTERM to match TERM. #658540
- SendEnv COLORTERM
- EOF
-
- if use pam ; then
- sed -i \
- -e "/^#UsePAM /s:.*:UsePAM yes:" \
- -e "/^#PasswordAuthentication
/s:.*:PasswordAuthentication no:" \
- -e "/^#PrintMotd /s:.*:PrintMotd no:" \
- -e "/^#PrintLastLog /s:.*:PrintLastLog no:" \
- "${ED}"/etc/ssh/sshd_config || die
- fi
-
- if use livecd ; then
- sed -i \
- -e '/^#PermitRootLogin/c# Allow root login with
password on livecds.\nPermitRootLogin Yes' \
- "${ED}"/etc/ssh/sshd_config || die
- fi
-}
-
-src_install() {
- emake install-nokeys DESTDIR="${D}"
- fperms 600 /etc/ssh/sshd_config
- dobin contrib/ssh-copy-id
- newinitd "${FILESDIR}"/sshd-r1.initd sshd
- newconfd "${FILESDIR}"/sshd-r1.confd sshd
-
- newpamd "${FILESDIR}"/sshd.pam_include.2 sshd
-
- tweak_ssh_configs
-
- doman contrib/ssh-copy-id.1
- dodoc CREDITS OVERVIEW README* TODO sshd_config
- use hpn && dodoc HPN-README
- use X509 || dodoc ChangeLog
-
- diropts -m 0700
- dodir /etc/skel/.ssh
-
- keepdir /var/empty
-
- systemd_dounit "${FILESDIR}"/sshd.{service,socket}
- systemd_newunit "${FILESDIR}"/sshd_at.service '[email protected]'
-}
-
-pkg_preinst() {
- if ! use ssl && has_version "${CATEGORY}/${PN}[ssl]"; then
- show_ssl_warning=1
- fi
-}
-
-pkg_postinst() {
- local old_ver
- for old_ver in ${REPLACING_VERSIONS}; do
- if ver_test "${old_ver}" -lt "5.8_p1"; then
- elog "Starting with openssh-5.8p1, the server will
default to a newer key"
- elog "algorithm (ECDSA). You are encouraged to
manually update your stored"
- elog "keys list as servers update theirs. See
ssh-keyscan(1) for more info."
- fi
- if ver_test "${old_ver}" -lt "7.0_p1"; then
- elog "Starting with openssh-6.7, support for USE=tcpd
has been dropped by upstream."
- elog "Make sure to update any configs that you might
have. Note that xinetd might"
- elog "be an alternative for you as it supports
USE=tcpd."
- fi
- if ver_test "${old_ver}" -lt "7.1_p1"; then #557388 #555518
- elog "Starting with openssh-7.0, support for ssh-dss
keys were disabled due to their"
- elog "weak sizes. If you rely on these key types, you
can re-enable the key types by"
- elog "adding to your sshd_config or ~/.ssh/config
files:"
- elog " PubkeyAcceptedKeyTypes=+ssh-dss"
- elog "You should however generate new keys using rsa or
ed25519."
-
- elog "Starting with openssh-7.0, the default for
PermitRootLogin changed from 'yes'"
- elog "to 'prohibit-password'. That means password auth
for root users no longer works"
- elog "out of the box. If you need this, please update
your sshd_config explicitly."
- fi
- if ver_test "${old_ver}" -lt "7.6_p1"; then
- elog "Starting with openssh-7.6p1, openssh upstream has
removed ssh1 support entirely."
- elog "Furthermore, rsa keys with less than 1024 bits
will be refused."
- fi
- if ver_test "${old_ver}" -lt "7.7_p1"; then
- elog "Starting with openssh-7.7p1, we no longer patch
openssh to provide LDAP functionality."
- elog "Install sys-auth/ssh-ldap-pubkey and use
OpenSSH's \"AuthorizedKeysCommand\" option"
- elog "if you need to authenticate against LDAP."
- elog "See
https://wiki.gentoo.org/wiki/SSH/LDAP_migration for more details."
- fi
- if ver_test "${old_ver}" -lt "8.2_p1"; then
- ewarn "After upgrading to openssh-8.2p1 please restart
sshd, otherwise you"
- ewarn "will not be able to establish new sessions.
Restarting sshd over a ssh"
- ewarn "connection is generally safe."
- fi
- done
-
- if [[ -n ${show_ssl_warning} ]]; then
- elog "Be aware that by disabling openssl support in openssh,
the server and clients"
- elog "no longer support dss/rsa/ecdsa keys. You will need to
generate ed25519 keys"
- elog "and update all clients/servers that utilize them."
- fi
-
- if use hpn && [[ -n "${HPN_DISABLE_MTAES}" ]] ; then
- elog ""
- elog "HPN's multi-threaded AES CTR cipher is currently known to
be broken"
- elog "and therefore disabled at runtime per default."
- elog "Make sure your sshd_config is up to date and contains"
- elog ""
- elog " DisableMTAES yes"
- elog ""
- elog "Otherwise you maybe unable to connect to this sshd using
any AES CTR cipher."
- elog ""
- fi
-}
