commit: 3bf7b7fcb0882ade14980e23f95150971de3c446
Author: Anthony G. Basile <blueness <AT> gentoo <DOT> org>
AuthorDate: Sat Jan 5 00:43:46 2019 +0000
Commit: Anthony G. Basile <blueness <AT> gentoo <DOT> org>
CommitDate: Sat Jan 5 00:43:46 2019 +0000
URL: https://gitweb.gentoo.org/proj/musl.git/commit/?id=3bf7b7fc
eclass/qt5-build.eclass: remove
Signed-off-by: Anthony G. Basile <blueness <AT> gentoo.org>
eclass/qt5-build.eclass | 808 ------------------------------------------------
1 file changed, 808 deletions(-)
diff --git a/eclass/qt5-build.eclass b/eclass/qt5-build.eclass
deleted file mode 100644
index 82a2aaf..0000000
--- a/eclass/qt5-build.eclass
+++ /dev/null
@@ -1,808 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-# @ECLASS: qt5-build.eclass
-# @MAINTAINER:
-# q...@gentoo.org
-# @AUTHOR:
-# Davide Pesavento <p...@gentoo.org>
-# @SUPPORTED_EAPIS: 6
-# @BLURB: Eclass for Qt5 split ebuilds.
-# @DESCRIPTION:
-# This eclass contains various functions that are used when building Qt5.
-# Requires EAPI 6.
-
-if [[ ${CATEGORY} != dev-qt ]]; then
- die "qt5-build.eclass is only to be used for building Qt 5."
-fi
-
-case ${EAPI} in
- 6) : ;;
- *) die "qt5-build.eclass: unsupported EAPI=${EAPI:-0}" ;;
-esac
-
-# @ECLASS-VARIABLE: QT5_MODULE
-# @PRE_INHERIT
-# @DESCRIPTION:
-# The upstream name of the module this package belongs to. Used for
-# SRC_URI and EGIT_REPO_URI. Must be set before inheriting the eclass.
-: ${QT5_MODULE:=${PN}}
-
-# @ECLASS-VARIABLE: QT5_TARGET_SUBDIRS
-# @DEFAULT_UNSET
-# @DESCRIPTION:
-# Array variable containing the source directories that should be built.
-# All paths must be relative to ${S}.
-
-# @ECLASS-VARIABLE: QT5_GENTOO_CONFIG
-# @DEFAULT_UNSET
-# @DESCRIPTION:
-# Array of <useflag:feature:macro> triplets that are evaluated in src_install
-# to generate the per-package list of enabled QT_CONFIG features and macro
-# definitions, which are then merged together with all other Qt5 packages
-# installed on the system to obtain the global qconfig.{h,pri} files.
-
-# @ECLASS-VARIABLE: VIRTUALX_REQUIRED
-# @DESCRIPTION:
-# For proper description see virtualx.eclass man page.
-# Here we redefine default value to be manual, if your package needs virtualx
-# for tests you should proceed with setting VIRTUALX_REQUIRED=test.
-: ${VIRTUALX_REQUIRED:=manual}
-
-inherit estack flag-o-matic ltprune toolchain-funcs versionator virtualx
-
-HOMEPAGE="https://www.qt.io/";
-LICENSE="|| ( GPL-2 GPL-3 LGPL-3 ) FDL-1.3"
-SLOT=5/$(get_version_component_range 1-2)
-
-QT5_MINOR_VERSION=$(get_version_component_range 2)
-QT5_PATCH_VERSION=$(get_version_component_range 3)
-readonly QT5_MINOR_VERSION QT5_PATCH_VERSION
-
-case ${PV} in
- 5.9999)
- # git dev branch
- QT5_BUILD_TYPE="live"
- EGIT_BRANCH="dev"
- ;;
- 5.?.9999|5.??.9999|5.???.9999)
- # git stable branch
- QT5_BUILD_TYPE="live"
- EGIT_BRANCH=${PV%.9999}
- ;;
- *_alpha*|*_beta*|*_rc*)
- # development release
- QT5_BUILD_TYPE="release"
- MY_P=${QT5_MODULE}-opensource-src-${PV/_/-}
-
SRC_URI="https://download.qt.io/development_releases/qt/${PV%.*}/${PV/_/-}/submodules/${MY_P}.tar.xz";
- S=${WORKDIR}/${MY_P}
- ;;
- *)
- # official stable release
- QT5_BUILD_TYPE="release"
- MY_P=${QT5_MODULE}-opensource-src-${PV}
-
SRC_URI="https://download.qt.io/official_releases/qt/${PV%.*}/${PV}/submodules/${MY_P}.tar.xz";
- S=${WORKDIR}/${MY_P}
- ;;
-esac
-readonly QT5_BUILD_TYPE
-
-EGIT_REPO_URI=(
- "https://code.qt.io/qt/${QT5_MODULE}.git";
- "https://github.com/qt/${QT5_MODULE}.git";
-)
-[[ ${QT5_BUILD_TYPE} == live ]] && inherit git-r3
-
-# @ECLASS-VARIABLE: QT5_BUILD_DIR
-# @OUTPUT_VARIABLE
-# @DESCRIPTION:
-# Build directory for out-of-source builds.
-case ${QT5_BUILD_TYPE} in
- live) : ${QT5_BUILD_DIR:=${S}_build} ;;
- release) : ${QT5_BUILD_DIR:=${S}} ;; # workaround for bug 497312
-esac
-
-IUSE="debug test"
-
-[[ ${PN} == qtwebkit ]] && RESTRICT+=" mirror" # bug 524584
-[[ ${QT5_BUILD_TYPE} == release ]] && RESTRICT+=" test" # bug 457182
-
-DEPEND="
- dev-lang/perl
- virtual/pkgconfig
-"
-if [[ (${PN} != qttest && ${PN} != qtwebkit) || (${PN} == qtwebkit &&
${QT5_MINOR_VERSION} -lt 9) ]]; then
- DEPEND+=" test? ( ~dev-qt/qttest-${PV} )"
-fi
-RDEPEND="
- dev-qt/qtchooser
-"
-
-
-###### Phase functions ######
-
-EXPORT_FUNCTIONS src_unpack src_prepare src_configure src_compile src_install
src_test pkg_postinst pkg_postrm
-
-# @FUNCTION: qt5-build_src_unpack
-# @DESCRIPTION:
-# Unpacks the sources.
-qt5-build_src_unpack() {
- if tc-is-gcc; then
- local min_gcc4_minor_version=7
- if [[ $(gcc-major-version) -lt 4 ]] || \
- [[ $(gcc-major-version) -eq 4 && $(gcc-minor-version) -lt
${min_gcc4_minor_version} ]]; then
- eerror "GCC version 4.${min_gcc4_minor_version} or
later is required to build this package"
- die "GCC 4.${min_gcc4_minor_version} or later required"
- fi
- fi
-
- # bug 307861
- if [[ ${PN} == qtwebengine || ${PN} == qtwebkit ]]; then
- eshopts_push -s extglob
- if is-flagq '-g?(gdb)?([1-9])'; then
- ewarn
- ewarn "You have enabled debug info (probably have -g or
-ggdb in your CFLAGS/CXXFLAGS)."
- ewarn "You may experience really long compilation times
and/or increased memory usage."
- ewarn "If compilation fails, please try removing
-g/-ggdb before reporting a bug."
- ewarn
- fi
- eshopts_pop
- fi
-
- case ${QT5_BUILD_TYPE} in
- live) git-r3_src_unpack ;;
- release) default ;;
- esac
-}
-
-# @FUNCTION: qt5-build_src_prepare
-# @DESCRIPTION:
-# Prepares the environment and patches the sources if necessary.
-qt5-build_src_prepare() {
- qt5_prepare_env
-
- if [[ ${QT5_MODULE} == qtbase ]]; then
- qt5_symlink_tools_to_build_dir
-
- # Avoid unnecessary qmake recompilations
- if [[ ${QT5_MINOR_VERSION} -ge 8 ]]; then
- sed -i -e "/Creating qmake/i if [ '!' -e
\"\$outpath/bin/qmake\" ]; then" \
- -e '/echo "Done."/a fi' \
- configure || die "sed failed (skip qmake
bootstrap)"
- else
- sed -i -re "s|^if true;.*(\[
'\!').*(\"\\\$outpath/bin/qmake\".*)|if \1 -e \2 then|" \
- configure || die "sed failed (skip qmake
bootstrap)"
- fi
-
- # Respect CC, CXX, *FLAGS, MAKEOPTS and EXTRA_EMAKE when
bootstrapping qmake
- sed -i -e "/outpath\/qmake\".*\"\$MAKE\")/ s:): \
- ${MAKEOPTS} ${EXTRA_EMAKE} 'CC=$(tc-getCC)'
'CXX=$(tc-getCXX)' \
- 'QMAKE_CFLAGS=${CFLAGS}' 'QMAKE_CXXFLAGS=${CXXFLAGS}'
'QMAKE_LFLAGS=${LDFLAGS}'&:" \
- -e
's/\(setBootstrapVariable\s\+\|EXTRA_C\(XX\)\?FLAGS=.*\)QMAKE_C\(XX\)\?FLAGS_\(DEBUG\|RELEASE\).*/:/'
\
- configure || die "sed failed (respect env for qmake
build)"
- sed -i -e '/^CPPFLAGS\s*=/ s/-g //' \
- qmake/Makefile.unix || die "sed failed (CPPFLAGS for
qmake build)"
-
- # Respect CXX in bsymbolic_functions, fvisibility, precomp, and
a few other tests
- sed -i -e "/^QMAKE_CONF_COMPILER=/ s:=.*:=\"$(tc-getCXX)\":" \
- configure || die "sed failed (QMAKE_CONF_COMPILER)"
-
- if [[ ${QT5_MINOR_VERSION} -le 7 ]]; then
- # Respect toolchain and flags in config.tests
- find config.tests/unix -name '*.test' -type f -execdir \
- sed -i -e 's/-nocache //' '{}' + || die
- fi
-
- # Don't inject -msse/-mavx/... into CXXFLAGS when detecting
- # compiler support for extended instruction sets (bug 552942)
- find config.tests/common -name '*.pro' -type f -execdir \
- sed -i -e '/QMAKE_CXXFLAGS\s*+=/ d' '{}' + || die
-
- # Don't add -O3 to CXXFLAGS (bug 549140)
- sed -i -e '/CONFIG\s*+=/ s/optimize_full//' \
- src/{corelib/corelib,gui/gui}.pro || die "sed failed
(optimize_full)"
- fi
-
- default
-}
-
-# @FUNCTION: qt5-build_src_configure
-# @DESCRIPTION:
-# Runs qmake in the target directories. For packages
-# in qtbase, ./configure is also run before qmake.
-qt5-build_src_configure() {
- if [[ ${QT5_MODULE} == qtbase ]]; then
- qt5_base_configure
- fi
-
- qt5_foreach_target_subdir qt5_qmake
-}
-
-# @FUNCTION: qt5-build_src_compile
-# @DESCRIPTION:
-# Runs emake in the target directories.
-qt5-build_src_compile() {
- qt5_foreach_target_subdir emake
-}
-
-# @FUNCTION: qt5-build_src_test
-# @DESCRIPTION:
-# Runs tests in the target directories.
-qt5-build_src_test() {
- # disable broken cmake tests (bug 474004)
- local myqmakeargs=("${myqmakeargs[@]}" -after SUBDIRS-=cmake
SUBDIRS-=installed_cmake)
-
- qt5_foreach_target_subdir qt5_qmake
- qt5_foreach_target_subdir emake
-
- # create a custom testrunner script that correctly sets
- # LD_LIBRARY_PATH before executing the given test
- local testrunner=${QT5_BUILD_DIR}/gentoo-testrunner
- cat > "${testrunner}" <<-_EOF_ || die
- #!/bin/sh
- export LD_LIBRARY_PATH="${QT5_BUILD_DIR}/lib:${QT5_LIBDIR}"
- "\$@"
- _EOF_
- chmod +x "${testrunner}"
-
- set -- qt5_foreach_target_subdir emake TESTRUNNER="'${testrunner}'"
check
- if [[ ${VIRTUALX_REQUIRED} == test ]]; then
- virtx "$@"
- else
- "$@"
- fi
-}
-
-# @FUNCTION: qt5-build_src_install
-# @DESCRIPTION:
-# Runs emake install in the target directories.
-qt5-build_src_install() {
- qt5_foreach_target_subdir emake INSTALL_ROOT="${D}" install
-
- if [[ ${PN} == qtcore ]]; then
- pushd "${QT5_BUILD_DIR}" >/dev/null || die
-
- set -- emake INSTALL_ROOT="${D}" \
- sub-qmake-qmake-aux-pro-install_subtargets \
- install_{syncqt,mkspecs}
-
- einfo "Running $*"
- "$@"
-
- popd >/dev/null || die
-
- docompress -x "${QT5_DOCDIR#${EPREFIX}}"/global
-
- # install an empty Gentoo/gentoo-qconfig.h in ${D}
- # so that it's placed under package manager control
- > "${T}"/gentoo-qconfig.h
- (
- insinto "${QT5_HEADERDIR#${EPREFIX}}"/Gentoo
- doins "${T}"/gentoo-qconfig.h
- )
-
- # include gentoo-qconfig.h at the beginning of QtCore/qconfig.h
- sed -i -e '1i #include <Gentoo/gentoo-qconfig.h>\n' \
- "${D}${QT5_HEADERDIR}"/QtCore/qconfig.h \
- || die "sed failed (qconfig.h)"
-
- # install qtchooser configuration file
- cat > "${T}/qt5-${CHOST}.conf" <<-_EOF_ || die
- ${QT5_BINDIR}
- ${QT5_LIBDIR}
- _EOF_
-
- (
- insinto /etc/xdg/qtchooser
- doins "${T}/qt5-${CHOST}.conf"
- )
-
- # convenience symlinks
- dosym qt5-"${CHOST}".conf /etc/xdg/qtchooser/5.conf
- dosym qt5-"${CHOST}".conf /etc/xdg/qtchooser/qt5.conf
- fi
-
- qt5_install_module_qconfigs
- prune_libtool_files
-}
-
-# @FUNCTION: qt5-build_pkg_postinst
-# @DESCRIPTION:
-# Regenerate configuration after installation or upgrade/downgrade.
-qt5-build_pkg_postinst() {
- qt5_regenerate_global_qconfigs
-}
-
-# @FUNCTION: qt5-build_pkg_postrm
-# @DESCRIPTION:
-# Regenerate configuration when a module is completely removed.
-qt5-build_pkg_postrm() {
- if [[ -z ${REPLACED_BY_VERSION} && ${PN} != qtcore ]]; then
- qt5_regenerate_global_qconfigs
- fi
-}
-
-
-###### Public helpers ######
-
-# @FUNCTION: qt_use
-# @USAGE: <flag> [feature] [enableval]
-# @DESCRIPTION:
-# <flag> is the name of a flag in IUSE.
-#
-# Outputs "-${enableval}-${feature}" if <flag> is enabled, "-no-${feature}"
-# otherwise. If [feature] is not specified, <flag> is used in its place.
-# If [enableval] is not specified, the "-${enableval}" prefix is omitted.
-qt_use() {
- [[ $# -ge 1 ]] || die "${FUNCNAME}() requires at least one argument"
-
- usex "$1" "${3:+-$3}-${2:-$1}" "-no-${2:-$1}"
-}
-
-# @FUNCTION: qt_use_compile_test
-# @USAGE: <flag> [config]
-# @DESCRIPTION:
-# <flag> is the name of a flag in IUSE.
-# [config] is the argument of qtCompileTest, defaults to <flag>.
-#
-# This function is useful to disable optional dependencies that are checked
-# at qmake-time using the qtCompileTest() function. If <flag> is disabled,
-# the compile test is skipped and the dependency is assumed to be unavailable,
-# i.e. the corresponding feature will be disabled. Note that all invocations
-# of this function must happen before calling qt5-build_src_configure.
-qt_use_compile_test() {
- [[ $# -ge 1 ]] || die "${FUNCNAME}() requires at least one argument"
-
- if ! use "$1"; then
- mkdir -p "${QT5_BUILD_DIR}" || die
- echo "CONFIG += done_config_${2:-$1}" >>
"${QT5_BUILD_DIR}"/.qmake.cache || die
- fi
-}
-
-# @FUNCTION: qt_use_disable_config
-# @USAGE: <flag> <config> <files...>
-# @DESCRIPTION:
-# <flag> is the name of a flag in IUSE.
-# <config> is the (lowercase) name of a Qt5 config entry.
-# <files...> is a list of one or more qmake project files.
-#
-# This function patches <files> to treat <config> as disabled
-# when <flag> is disabled, otherwise it does nothing.
-# This can be useful to avoid an automagic dependency when the config entry
-# is enabled on the system but the corresponding USE flag is disabled.
-qt_use_disable_config() {
- [[ $# -ge 3 ]] || die "${FUNCNAME}() requires at least three arguments"
-
- local flag=$1
- local config=$2
- shift 2
-
- if ! use "${flag}"; then
- echo "$@" | xargs sed -i -e "s/qtConfig(${config})/false/g" ||
die
- fi
-}
-
-# @FUNCTION: qt_use_disable_mod
-# @USAGE: <flag> <module> <files...>
-# @DESCRIPTION:
-# <flag> is the name of a flag in IUSE.
-# <module> is the (lowercase) name of a Qt5 module.
-# <files...> is a list of one or more qmake project files.
-#
-# This function patches <files> to treat <module> as not installed
-# when <flag> is disabled, otherwise it does nothing.
-# This can be useful to avoid an automagic dependency when the module
-# is present on the system but the corresponding USE flag is disabled.
-qt_use_disable_mod() {
- [[ $# -ge 3 ]] || die "${FUNCNAME}() requires at least three arguments"
-
- local flag=$1
- local module=$2
- shift 2
-
- if ! use "${flag}"; then
- echo "$@" | xargs sed -i -e "s/qtHaveModule(${module})/false/g"
|| die
- fi
-}
-
-
-###### Internal functions ######
-
-# @FUNCTION: qt5_prepare_env
-# @INTERNAL
-# @DESCRIPTION:
-# Prepares the environment for building Qt.
-qt5_prepare_env() {
- # setup installation directories
- # note: keep paths in sync with qmake-utils.eclass
- QT5_PREFIX=${EPREFIX}/usr
- QT5_HEADERDIR=${QT5_PREFIX}/include/qt5
- QT5_LIBDIR=${QT5_PREFIX}/$(get_libdir)
- QT5_ARCHDATADIR=${QT5_PREFIX}/$(get_libdir)/qt5
- QT5_BINDIR=${QT5_ARCHDATADIR}/bin
- QT5_PLUGINDIR=${QT5_ARCHDATADIR}/plugins
- QT5_LIBEXECDIR=${QT5_ARCHDATADIR}/libexec
- QT5_IMPORTDIR=${QT5_ARCHDATADIR}/imports
- QT5_QMLDIR=${QT5_ARCHDATADIR}/qml
- QT5_DATADIR=${QT5_PREFIX}/share/qt5
- QT5_DOCDIR=${QT5_PREFIX}/share/doc/qt-${PV}
- QT5_TRANSLATIONDIR=${QT5_DATADIR}/translations
- QT5_EXAMPLESDIR=${QT5_DATADIR}/examples
- QT5_TESTSDIR=${QT5_DATADIR}/tests
- QT5_SYSCONFDIR=${EPREFIX}/etc/xdg
- readonly QT5_PREFIX QT5_HEADERDIR QT5_LIBDIR QT5_ARCHDATADIR \
- QT5_BINDIR QT5_PLUGINDIR QT5_LIBEXECDIR QT5_IMPORTDIR \
- QT5_QMLDIR QT5_DATADIR QT5_DOCDIR QT5_TRANSLATIONDIR \
- QT5_EXAMPLESDIR QT5_TESTSDIR QT5_SYSCONFDIR
-
- if [[ ${QT5_MODULE} == qtbase ]]; then
- # see mkspecs/features/qt_config.prf
- export
QMAKEMODULES="${QT5_BUILD_DIR}/mkspecs/modules:${S}/mkspecs/modules:${QT5_ARCHDATADIR}/mkspecs/modules"
- fi
-}
-
-# @FUNCTION: qt5_foreach_target_subdir
-# @INTERNAL
-# @DESCRIPTION:
-# Executes the command given as argument from inside each directory
-# listed in QT5_TARGET_SUBDIRS. Handles autotests subdirs automatically.
-qt5_foreach_target_subdir() {
- [[ -z ${QT5_TARGET_SUBDIRS[@]} ]] && QT5_TARGET_SUBDIRS=("")
-
- local subdir=
- for subdir in "${QT5_TARGET_SUBDIRS[@]}"; do
- if [[ ${EBUILD_PHASE} == test ]]; then
- subdir=tests/auto${subdir#src}
- [[ -d ${S}/${subdir} ]] || continue
- fi
-
- local msg="Running $* ${subdir:+in ${subdir}}"
- einfo "${msg}"
-
- mkdir -p "${QT5_BUILD_DIR}/${subdir}" || die -n || return $?
- pushd "${QT5_BUILD_DIR}/${subdir}" >/dev/null || die -n ||
return $?
-
- "$@" || die -n "${msg} failed" || return $?
-
- popd >/dev/null || die -n || return $?
- done
-}
-
-# @FUNCTION: qt5_symlink_tools_to_build_dir
-# @INTERNAL
-# @DESCRIPTION:
-# Symlinks qmake and a few other tools to QT5_BUILD_DIR,
-# so that they can be used when building other modules.
-qt5_symlink_tools_to_build_dir() {
- local tool= tools=()
- if [[ ${PN} != qtcore ]]; then
- tools+=(qmake moc rcc qlalr)
- [[ ${PN} != qtdbus ]] && tools+=(qdbuscpp2xml qdbusxml2cpp)
- [[ ${PN} != qtwidgets ]] && tools+=(uic)
- fi
-
- mkdir -p "${QT5_BUILD_DIR}"/bin || die
- pushd "${QT5_BUILD_DIR}"/bin >/dev/null || die
-
- for tool in "${tools[@]}"; do
- [[ -e ${QT5_BINDIR}/${tool} ]] || continue
- ln -s "${QT5_BINDIR}/${tool}" . || die "failed to symlink
${tool}"
- done
-
- popd >/dev/null || die
-}
-
-# @FUNCTION: qt5_base_configure
-# @INTERNAL
-# @DESCRIPTION:
-# Runs ./configure for modules belonging to qtbase.
-qt5_base_configure() {
- # setup toolchain variables used by configure
- tc-export AR CC CXX OBJDUMP RANLIB STRIP
- export LD="$(tc-getCXX)"
-
- # bug 633838
- if [[ ${QT5_MINOR_VERSION} -ge 9 ]]; then
- unset QMAKESPEC XQMAKESPEC QMAKEPATH QMAKEFEATURES
- fi
-
- # configure arguments
- local conf=(
- # installation paths
- -prefix "${QT5_PREFIX}"
- -bindir "${QT5_BINDIR}"
- -headerdir "${QT5_HEADERDIR}"
- -libdir "${QT5_LIBDIR}"
- -archdatadir "${QT5_ARCHDATADIR}"
- -plugindir "${QT5_PLUGINDIR}"
- -libexecdir "${QT5_LIBEXECDIR}"
- -importdir "${QT5_IMPORTDIR}"
- -qmldir "${QT5_QMLDIR}"
- -datadir "${QT5_DATADIR}"
- -docdir "${QT5_DOCDIR}"
- -translationdir "${QT5_TRANSLATIONDIR}"
- -sysconfdir "${QT5_SYSCONFDIR}"
- -examplesdir "${QT5_EXAMPLESDIR}"
- -testsdir "${QT5_TESTSDIR}"
-
- # configure in release mode by default,
- # override via the CONFIG qmake variable
- -release
- -no-separate-debug-info
-
- # no need to forcefully build host tools in optimized mode,
- # just follow the overall debug/release build type
- -no-optimized-tools
-
- # licensing stuff
- -opensource -confirm-license
-
- # autodetect the highest supported version of the C++ standard
- #-c++std <c++11|c++14|c++1z>
-
- # build shared libraries
- -shared
-
- # always enable large file support
- $([[ ${QT5_MINOR_VERSION} -lt 8 ]] && echo -largefile)
-
- # disabling accessibility is not recommended by upstream, as
- # it will break QStyle and may break other internal parts of Qt
- -accessibility
-
- # disable all SQL drivers by default, override in qtsql
- -no-sql-db2 -no-sql-ibase -no-sql-mysql -no-sql-oci -no-sql-odbc
- -no-sql-psql -no-sql-sqlite -no-sql-sqlite2 -no-sql-tds
-
- # ensure the QML debugging support (qmltooling) is built in
qtdeclarative
- -qml-debug
-
- # MIPS DSP instruction set extensions
- $(is-flagq -mno-dsp && echo -no-mips_dsp)
- $(is-flagq -mno-dspr2 && echo -no-mips_dspr2)
-
- # use pkg-config to detect include and library paths
- -pkg-config
-
- # prefer system libraries (only common hard deps here)
- -system-zlib
- -system-pcre
- -system-doubleconversion
-
- # disable everything to prevent automagic deps (part 1)
- -no-mtdev
- -no-journald -no-syslog
- -no-libpng -no-libjpeg
- -no-freetype -no-harfbuzz
- -no-openssl -no-libproxy
- -no-xkbcommon-x11 -no-xkbcommon-evdev
- -no-xinput2 -no-xcb-xlib
-
- # cannot use -no-gif because there is no way to override it
later
- #-no-gif
-
- # always enable glib event loop support
- -glib
-
- # disable everything to prevent automagic deps (part 2)
- -no-gtk
- $([[ ${QT5_MINOR_VERSION} -lt 8 ]] && echo -no-pulseaudio
-no-alsa)
-
- # exclude examples and tests from default build
- -nomake examples
- -nomake tests
- -no-compile-examples
-
- # disable rpath on non-prefix (bugs 380415 and 417169)
- $(usex prefix '' -no-rpath)
-
- # print verbose information about each configure test
- -verbose
-
- # always enable iconv support
- # since 5.8 this is handled in qtcore
- $([[ ${QT5_MINOR_VERSION} -lt 8 ]] && echo -iconv)
-
- # disable everything to prevent automagic deps (part 3)
- -no-cups -no-evdev -no-tslib -no-icu -no-fontconfig -no-dbus
-
- # let portage handle stripping
- -no-strip
-
- # precompiled headers can cause problems on hardened, so turn
them off
- -no-pch
-
- # link-time code generation is not something we want to enable
by default
- -no-ltcg
-
- # reduced relocations cause major breakage on at least arm and
ppc, so
- # don't specify anything and let the configure figure out if
they are
- # supported; see also
https://bugreports.qt.io/browse/QTBUG-36129
- #-reduce-relocations
-
- # let configure automatically detect if GNU gold is available
- -no-use-gold-linker
-
- # disable all platform plugins by default, override in qtgui
- -no-xcb -no-eglfs -no-kms -no-gbm -no-directfb -no-linuxfb
-no-mirclient
-
- # disable undocumented X11-related flags, override in qtgui
- # (not shown in ./configure -help output)
- -no-xkb
- $([[ ${QT5_MINOR_VERSION} -lt 8 ]] && echo -no-xrender)
-
- # disable obsolete/unused X11-related flags
- $([[ ${QT5_MINOR_VERSION} -lt 8 ]] && echo -no-mitshm
-no-xcursor -no-xfixes -no-xrandr -no-xshape -no-xsync)
-
- # always enable session management support: it doesn't need
extra deps
- # at configure time and turning it off is dangerous, see bug
518262
- -sm
-
- # typedef qreal to double (warning: changing this flag breaks
the ABI)
- -qreal double
-
- # disable OpenGL and EGL support by default, override in qtgui,
- # qtopengl, qtprintsupport and qtwidgets
- -no-opengl -no-egl
-
- # disable libinput-based generic plugin by default, override in
qtgui
- -no-libinput
-
- # disable gstreamer by default, override in qtmultimedia
- $([[ ${QT5_MINOR_VERSION} -lt 8 ]] && echo -no-gstreamer)
-
- # respect system proxies by default: it's the most natural
- # setting, and it'll become the new upstream default in 5.8
- -system-proxies
-
- # do not build with -Werror
- -no-warnings-are-errors
-
- # module-specific options
- "${myconf[@]}"
- )
-
- pushd "${QT5_BUILD_DIR}" >/dev/null || die
-
- einfo "Configuring with: ${conf[@]}"
- "${S}"/configure "${conf[@]}" || die "configure failed"
-
- if [[ ${QT5_MINOR_VERSION} -ge 8 ]]; then
- # a forwarding header is no longer created since 5.8, causing
the system
- # config to always be used. bug 599636
- cp src/corelib/global/qconfig.h include/QtCore/ || die
- fi
-
- popd >/dev/null || die
-
-}
-
-# @FUNCTION: qt5_qmake
-# @INTERNAL
-# @DESCRIPTION:
-# Helper function that runs qmake in the current target subdir.
-# Intended to be called by qt5_foreach_target_subdir().
-qt5_qmake() {
- local projectdir=${PWD/#${QT5_BUILD_DIR}/${S}}
- local qmakepath=
- if [[ ${QT5_MODULE} == qtbase ]]; then
- qmakepath=${QT5_BUILD_DIR}/bin
- else
- qmakepath=${QT5_BINDIR}
- fi
-
- "${qmakepath}"/qmake \
- "${projectdir}" \
- CONFIG+=$(usex debug debug release) \
- CONFIG-=$(usex debug release debug) \
- QMAKE_AR="$(tc-getAR) cqs" \
- QMAKE_CC="$(tc-getCC)" \
- QMAKE_LINK_C="$(tc-getCC)" \
- QMAKE_LINK_C_SHLIB="$(tc-getCC)" \
- QMAKE_CXX="$(tc-getCXX)" \
- QMAKE_LINK="$(tc-getCXX)" \
- QMAKE_LINK_SHLIB="$(tc-getCXX)" \
- QMAKE_OBJCOPY="$(tc-getOBJCOPY)" \
- QMAKE_RANLIB= \
- QMAKE_STRIP="$(tc-getSTRIP)" \
- QMAKE_CFLAGS="${CFLAGS}" \
- QMAKE_CFLAGS_RELEASE= \
- QMAKE_CFLAGS_DEBUG= \
- QMAKE_CXXFLAGS="${CXXFLAGS}" \
- QMAKE_CXXFLAGS_RELEASE= \
- QMAKE_CXXFLAGS_DEBUG= \
- QMAKE_LFLAGS="${LDFLAGS}" \
- QMAKE_LFLAGS_RELEASE= \
- QMAKE_LFLAGS_DEBUG= \
- "${myqmakeargs[@]}" \
- || die "qmake failed (${projectdir#${S}/})"
-}
-
-# @FUNCTION: qt5_install_module_qconfigs
-# @INTERNAL
-# @DESCRIPTION:
-# Creates and installs gentoo-specific ${PN}-qconfig.{h,pri} files.
-qt5_install_module_qconfigs() {
- local x qconfig_add= qconfig_remove=
-
- > "${T}"/${PN}-qconfig.h
- > "${T}"/${PN}-qconfig.pri
-
- # generate qconfig_{add,remove} and ${PN}-qconfig.h
- for x in "${QT5_GENTOO_CONFIG[@]}"; do
- local flag=${x%%:*}
- x=${x#${flag}:}
- local feature=${x%%:*}
- x=${x#${feature}:}
- local macro=${x}
- macro=$(tr 'a-z-' 'A-Z_' <<< "${macro}")
-
- if [[ -z ${flag} ]] || { [[ ${flag} != '!' ]] && use ${flag};
}; then
- [[ -n ${feature} ]] && qconfig_add+=" ${feature}"
- [[ -n ${macro} ]] && echo "#define QT_${macro}" >>
"${T}"/${PN}-qconfig.h
- else
- [[ -n ${feature} ]] && qconfig_remove+=" ${feature}"
- [[ -n ${macro} ]] && echo "#define QT_NO_${macro}" >>
"${T}"/${PN}-qconfig.h
- fi
- done
-
- # install ${PN}-qconfig.h
- [[ -s ${T}/${PN}-qconfig.h ]] && (
- insinto "${QT5_HEADERDIR#${EPREFIX}}"/Gentoo
- doins "${T}"/${PN}-qconfig.h
- )
-
- # generate and install ${PN}-qconfig.pri
- [[ -n ${qconfig_add} ]] && echo "QCONFIG_ADD=${qconfig_add}" >>
"${T}"/${PN}-qconfig.pri
- [[ -n ${qconfig_remove} ]] && echo "QCONFIG_REMOVE=${qconfig_remove}"
>> "${T}"/${PN}-qconfig.pri
- [[ -s ${T}/${PN}-qconfig.pri ]] && (
- insinto "${QT5_ARCHDATADIR#${EPREFIX}}"/mkspecs/gentoo
- doins "${T}"/${PN}-qconfig.pri
- )
-}
-
-# @FUNCTION: qt5_regenerate_global_qconfigs
-# @INTERNAL
-# @DESCRIPTION:
-# Generates Gentoo-specific qconfig.{h,pri} according to the build
configuration.
-# Don't call die here because dying in pkg_post{inst,rm} only makes things
worse.
-qt5_regenerate_global_qconfigs() {
- einfo "Regenerating gentoo-qconfig.h"
-
- find "${ROOT%/}${QT5_HEADERDIR}"/Gentoo \
- -name '*-qconfig.h' -a \! -name 'gentoo-qconfig.h' -type f \
- -execdir cat '{}' + | sort -u > "${T}"/gentoo-qconfig.h
-
- [[ -s ${T}/gentoo-qconfig.h ]] || ewarn "Generated gentoo-qconfig.h is
empty"
- mv -f "${T}"/gentoo-qconfig.h
"${ROOT%/}${QT5_HEADERDIR}"/Gentoo/gentoo-qconfig.h \
- || eerror "Failed to install new gentoo-qconfig.h"
-
- einfo "Updating QT_CONFIG in qconfig.pri"
-
- local qconfig_pri=${ROOT%/}${QT5_ARCHDATADIR}/mkspecs/qconfig.pri
- if [[ -f ${qconfig_pri} ]]; then
- local x qconfig_add= qconfig_remove=
- local qt_config=$(sed -n 's/^QT_CONFIG\s*+=\s*//p'
"${qconfig_pri}")
- local new_qt_config=
-
- # generate list of QT_CONFIG entries from the existing list,
- # appending QCONFIG_ADD and excluding QCONFIG_REMOVE
- eshopts_push -s nullglob
- for x in
"${ROOT%/}${QT5_ARCHDATADIR}"/mkspecs/gentoo/*-qconfig.pri; do
- qconfig_add+=" $(sed -n 's/^QCONFIG_ADD=\s*//p' "${x}")"
- qconfig_remove+=" $(sed -n 's/^QCONFIG_REMOVE=\s*//p'
"${x}")"
- done
- eshopts_pop
- for x in ${qt_config} ${qconfig_add}; do
- if ! has "${x}" ${new_qt_config} ${qconfig_remove}; then
- new_qt_config+=" ${x}"
- fi
- done
-
- # now replace the existing QT_CONFIG with the generated list
- sed -i -e "s/^QT_CONFIG\s*+=.*/QT_CONFIG +=${new_qt_config}/" \
- "${qconfig_pri}" || eerror "Failed to sed QT_CONFIG in
${qconfig_pri}"
- else
- ewarn "${qconfig_pri} does not exist or is not a regular file"
- fi
-}
