commit: 186da5b5e4fccd3b0a93059d78f42add3c6629a5 Author: Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org> AuthorDate: Tue Feb 16 17:42:34 2016 +0000 Commit: Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org> CommitDate: Tue Feb 16 17:43:41 2016 +0000 URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=186da5b5
net-misc/sks: Clean up old versions Package-Manager: portage-2.2.27 net-misc/sks/sks-1.1.5-r1.ebuild | 117 -------------------------------------- net-misc/sks/sks-1.1.5-r2.ebuild | 118 --------------------------------------- 2 files changed, 235 deletions(-) diff --git a/net-misc/sks/sks-1.1.5-r1.ebuild b/net-misc/sks/sks-1.1.5-r1.ebuild deleted file mode 100644 index f304141..0000000 --- a/net-misc/sks/sks-1.1.5-r1.ebuild +++ /dev/null @@ -1,117 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -EAPI=5 - -inherit multilib user readme.gentoo systemd - -DESCRIPTION="An OpenPGP keyserver which is decentralized and provides highly reliable synchronization" -HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"; -SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"; -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="amd64 ~x86" -IUSE="optimize test" -DOC_CONTENTS="To get sks running, first build the database, -start the databse, import atleast one key, then -run a cleandb. See the sks man page for more information -Typical DB_CONFIG file and sksconf has been installed -in /var/lib/sks and can be used as templates by renaming -to remove the .typical extension. The DB_CONFIG file has -to be in place before doing the database build, or the BDB -environment has to be manually cleared from both KDB and PTree. -The same applies if you are upgrading to this version with an existing KDB/Ptree, -using another version of BDB than 4.8; you need to clear the environment -using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree -Additionally a sample web interface has been installed as -web.typical in /var/lib/sks that can be used by renaming it to web -Important: It is strongly recommended to set up SKS behind a -reverse proxy. Instructions on properly configuring SKS can be -found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"; - -DEPEND="dev-lang/ocaml - dev-ml/cryptokit - sys-libs/db:4.8" -RDEPEND="${DEPEND}" - -pkg_setup() { - ebegin "Creating named group and user" - enewgroup sks - enewuser sks -1 -1 /var/lib/sks sks -} - -src_prepare() { - cp Makefile.local.unused Makefile.local || die - sed -i \ - -e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \ - -e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db4.8/:g" \ - -e "s:^LIBDB=.*$:LIBDB=-ldb-4.8:g" \ - -e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \ - -e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \ - Makefile.local || die - sed -i \ - -e 's:^CAMLINCLUDE= -I lib -I bdb$:CAMLINCLUDE= -I lib -I bdb -I +cryptokit:g' \ - -e 's:-Werror-implicit-function-declaration::g' \ - Makefile bdb/Makefile || die - sed -i \ - -e 's:/usr/sbin/sks:/usr/bin/sks:g' \ - sks_build.sh || die - - epatch "${FILESDIR}/${P}-eddsa.patch" - epatch "${FILESDIR}/${P}-disable-warn-error-a.patch" -} - -src_compile() { - emake dep - # sks build fails with paralell build in module Bdb - emake -j1 all - if use optimize; then - emake all.bc - fi -} - -src_test() { - ./sks unit_test || die -} - -src_install() { - if use optimize; then - emake install.bc - dosym /usr/bin/sks.bc usr/bin/sks - dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail - else - emake install - fi - - dodoc README.md - - newinitd "${FILESDIR}/sks-db.initd" sks-db - newinitd "${FILESDIR}/sks-recon.initd" sks-recon - newconfd "${FILESDIR}/sks.confd" sks - systemd_dounit "${FILESDIR}"/sks-db.service - systemd_dounit "${FILESDIR}"/sks-recon.service - - dodir "/var/lib/sks/web.typical" - insinto /var/lib/sks - newins sampleConfig/DB_CONFIG DB_CONFIG.typical - newins sampleConfig/sksconf.typical sksconf.typical - insinto /var/lib/sks/web.typical - doins sampleWeb/HTML5/* - - keepdir /var/lib/sks - readme.gentoo_create_doc -} - -pkg_postinst() { - readme.gentoo_print_elog - - if [[ -n ${REPLACING_VERSIONS} ]]; then - einfo "Note when upgrading from versions of SKS earlier than 1.1.4" - einfo "The default values for pagesize settings have changed. To continue" - einfo "using an existing DB without rebuilding, explicit settings have to be" - einfo "added to the sksconf file." - einfo "pagesize: 4" - einfo "ptree_pagesize: 1" - fi; -} diff --git a/net-misc/sks/sks-1.1.5-r2.ebuild b/net-misc/sks/sks-1.1.5-r2.ebuild deleted file mode 100644 index 4aa095c..0000000 --- a/net-misc/sks/sks-1.1.5-r2.ebuild +++ /dev/null @@ -1,118 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -EAPI=5 - -inherit multilib user readme.gentoo systemd - -DESCRIPTION="An OpenPGP keyserver which is decentralized and provides highly reliable synchronization" -HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"; -SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"; -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="~amd64 ~x86" -IUSE="optimize test" -DOC_CONTENTS="To get sks running, first build the database, -start the databse, import atleast one key, then -run a cleandb. See the sks man page for more information -Typical DB_CONFIG file and sksconf has been installed -in /var/lib/sks and can be used as templates by renaming -to remove the .typical extension. The DB_CONFIG file has -to be in place before doing the database build, or the BDB -environment has to be manually cleared from both KDB and PTree. -The same applies if you are upgrading to this version with an existing KDB/Ptree, -using another version of BDB than 4.8; you need to clear the environment -using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree -Additionally a sample web interface has been installed as -web.typical in /var/lib/sks that can be used by renaming it to web -Important: It is strongly recommended to set up SKS behind a -reverse proxy. Instructions on properly configuring SKS can be -found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"; - -DEPEND="dev-lang/ocaml - dev-ml/cryptokit - sys-libs/db:4.8" -RDEPEND="${DEPEND}" - -pkg_setup() { - ebegin "Creating named group and user" - enewgroup sks - enewuser sks -1 -1 /var/lib/sks sks -} - -src_prepare() { - cp Makefile.local.unused Makefile.local || die - sed -i \ - -e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \ - -e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db4.8/:g" \ - -e "s:^LIBDB=.*$:LIBDB=-ldb-4.8:g" \ - -e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \ - -e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \ - Makefile.local || die - sed -i \ - -e 's:^CAMLINCLUDE= -I lib -I bdb$:CAMLINCLUDE= -I lib -I bdb -I +cryptokit:g' \ - -e 's:-Werror-implicit-function-declaration::g' \ - Makefile bdb/Makefile || die - sed -i \ - -e 's:/usr/sbin/sks:/usr/bin/sks:g' \ - sks_build.sh || die - - epatch "${FILESDIR}/${P}-eddsa.patch" - epatch "${FILESDIR}/${P}-disable-warn-error-a.patch" - epatch "${FILESDIR}/${P}-curve25519.patch" -} - -src_compile() { - emake dep - # sks build fails with paralell build in module Bdb - emake -j1 all - if use optimize; then - emake all.bc - fi -} - -src_test() { - ./sks unit_test || die -} - -src_install() { - if use optimize; then - emake install.bc - dosym /usr/bin/sks.bc usr/bin/sks - dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail - else - emake install - fi - - dodoc README.md - - newinitd "${FILESDIR}/sks-db.initd" sks-db - newinitd "${FILESDIR}/sks-recon.initd" sks-recon - newconfd "${FILESDIR}/sks.confd" sks - systemd_dounit "${FILESDIR}"/sks-db.service - systemd_dounit "${FILESDIR}"/sks-recon.service - - dodir "/var/lib/sks/web.typical" - insinto /var/lib/sks - newins sampleConfig/DB_CONFIG DB_CONFIG.typical - newins sampleConfig/sksconf.typical sksconf.typical - insinto /var/lib/sks/web.typical - doins sampleWeb/HTML5/* - - keepdir /var/lib/sks - readme.gentoo_create_doc -} - -pkg_postinst() { - readme.gentoo_print_elog - - if [[ -n ${REPLACING_VERSIONS} ]]; then - einfo "Note when upgrading from versions of SKS earlier than 1.1.4" - einfo "The default values for pagesize settings have changed. To continue" - einfo "using an existing DB without rebuilding, explicit settings have to be" - einfo "added to the sksconf file." - einfo "pagesize: 4" - einfo "ptree_pagesize: 1" - fi; -}
