commit: 40c8422220c09b427b927b460ce490b28427bf64 Author: Andreas K. Huettel (dilfridge) <dilfridge <AT> gentoo <DOT> org> AuthorDate: Fri Nov 20 12:08:04 2015 +0000 Commit: Andreas Hüttel <dilfridge <AT> gentoo <DOT> org> CommitDate: Fri Nov 20 12:08:51 2015 +0000 URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=40c84222
sci-libs/linux-gpib: Remove old Package-Manager: portage-2.2.25 sci-libs/linux-gpib/Manifest | 1 - sci-libs/linux-gpib/linux-gpib-3.2.20-r1.ebuild | 183 ------------------------ sci-libs/linux-gpib/linux-gpib-3.2.21.ebuild | 183 ------------------------ 3 files changed, 367 deletions(-) diff --git a/sci-libs/linux-gpib/Manifest b/sci-libs/linux-gpib/Manifest index 32a8ffc..a69e209 100644 --- a/sci-libs/linux-gpib/Manifest +++ b/sci-libs/linux-gpib/Manifest @@ -1,5 +1,4 @@ DIST gpib_firmware-2006-11-12.tar.gz 169357 SHA256 98380a8d12e6e34dccc0c1d82b48ed796c0c0f5571107d6a685524560aa8d701 SHA512 164d6fcfb3af43933f0a16645276f7d527a7aa24ef311f6ae3dcd7f45c41f92c855cf221bc946772f43fc2f9524057abc34bbd7d805c89b33ed7e111bc6870af WHIRLPOOL 44506c9d03e746f5bc88f9a2f20e07879a4c4c72f52a5dae97accb381f8ac7f5b5c0cf5c58d1045b18ed6cbda20549a1fdb7e5ab0151a1081da1ec798c683e67 -DIST linux-gpib-3.2.20.tar.gz 1254951 SHA256 cde3e77c3fd968e1ee5785abc2d6e09f0f66711fc2612abfc7b05c72c16c2e9a SHA512 679c3895ac5077b3246c43818c7c85ae53597d4a7e70ff2306978472337214952798c41eca9a4ae8be20aa3afa4bc78a7b796fccd6b63a8e1a879fcd144adea9 WHIRLPOOL 653ea123c81ccaf5d55055e70609152584adf36eb6cd0e421f10f5c86d24781e44ced125e9ac417901594c6ac83bed1f7123de27578ad3c841612bb9955eab85 DIST linux-gpib-3.2.21-ctrl-c.patch.gz 10477 SHA256 697a460ea8515788765983afb5c27ad527e6ab1e75232133c572530643351916 SHA512 4b34ecbc5a3f3170337808397df19b9cf09d3fc8a53052fb560ae7b5336b946c6b1c76ba24b0ad66d4bb5a005902fe8599bb7e981c140a68046b9f14ed5268b3 WHIRLPOOL 5656ed7d4dafeff4b766f247c4f495444d271130cbad8bedaef9b761e14b57c09b46a7ccd5e3be5ff50934f48a88a987eb71f6997aafdcd4adc486c49b2c0c5d DIST linux-gpib-3.2.21.tar.gz 1274505 SHA256 31fd86f4897239ffc55e0d4d850586d24d74144b604d6d39fd33dc59d28f7019 SHA512 539f7444e6bcd07d66cabc3abae9d40cdea3a84365bd69a4621149bc11b7b0e9826650d91d2a048d9780fab7db30005b08a4b91c77e7a26e036ed6f5adb6850b WHIRLPOOL 72a9c929d7e3b79c5c954fb6e41c4d9eb450595c6dccc877a3b47851e467e741b191a708ec3c018e4fe576e5677ffec5986970f83c020707bbbd8e2968e43153 DIST linux-gpib-4.0.2.tar.gz 1233294 SHA256 0a352a168d69ab564a2cc03ce7239370d944d187d6bc187697fb704c6e49d98f SHA512 20e504fa8e72c6c04b7cda70898cf520343d777825dfe976ea7fd11ee6aa4a8337c0badeec6c5c3c0bd20853d831802b0641c018817439677756654295ff65d6 WHIRLPOOL 8abc1afcd7010a6c585ca643c87813ab071b9a26a742d3ae3bb4349af17e16692d9f7d0b2a48c539f4c419108bcfc109e080ddc95fc8b1d28db560eab2544f74 diff --git a/sci-libs/linux-gpib/linux-gpib-3.2.20-r1.ebuild b/sci-libs/linux-gpib/linux-gpib-3.2.20-r1.ebuild deleted file mode 100644 index 02f8682..0000000 --- a/sci-libs/linux-gpib/linux-gpib-3.2.20-r1.ebuild +++ /dev/null @@ -1,183 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -EAPI=5 - -PERL_EXPORT_PHASE_FUNCTIONS=no -GENTOO_DEPEND_ON_PERL=no -PYTHON_COMPAT=( python2_7 ) - -inherit eutils linux-mod autotools perl-module python-single-r1 toolchain-funcs udev user - -DESCRIPTION="Kernel module and driver library for GPIB (IEEE 488.2) hardware" -HOMEPAGE="http://linux-gpib.sourceforge.net/"; -SRC_URI="mirror://sourceforge/linux-gpib/${P}.tar.gz - firmware? ( http://linux-gpib.sourceforge.net/firmware/gpib_firmware-2006-11-12.tar.gz )" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="amd64 ~arm ~x86" -IUSE="isa pcmcia static debug guile perl php python tcl doc firmware" - -COMMONDEPEND=" - tcl? ( dev-lang/tcl:0= ) - guile? ( dev-scheme/guile:12 ) - perl? ( dev-lang/perl:= ) - php? ( dev-lang/php:= ) - python? ( ${PYTHON_DEPS} ) - firmware? ( sys-apps/fxload )" -RDEPEND="${COMMONDEPEND}" -DEPEND="${COMMONDEPEND} - virtual/pkgconfig - doc? ( app-text/docbook-sgml-utils ) - perl? ( virtual/perl-ExtUtils-MakeMaker )" - -REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )" - -PATCHES=( - "${FILESDIR}"/${PN}-3.2.15-build.patch - "${FILESDIR}"/${PN}-3.2.16-perl.patch - "${FILESDIR}"/${PN}-3.2.16-reallydie.patch -) - -pkg_setup () { - use perl && perl_set_version - use python && python_setup - linux-mod_pkg_setup - - if kernel_is -lt 2 6 8; then - die "Kernel versions older than 2.6.8 are not supported." - fi - - # https://sourceforge.net/tracker/?func=detail&aid=3285657&group_id=42378&atid=432940 - if use pcmcia && kernel_is -ge 2 6 38; then - die "pcmcia support is broken on kernels newer 2.6.38" - fi -} - -src_prepare () { - epatch ${PATCHES[@]} - epatch_user - eautoreconf -} - -src_configure() { - set_arch_to_kernel - econf \ - $(use_enable isa) \ - $(use_enable pcmcia) \ - $(use_enable static) \ - $(use_enable debug driver-debug) \ - $(use_enable guile guile-binding) \ - $(use_enable perl perl-binding) \ - $(use_enable php php-binding) \ - $(use_enable python python-binding) \ - $(use_enable tcl tcl-binding) \ - $(use_enable doc documentation) \ - --with-linux-srcdir=${KV_DIR} -} - -src_compile() { - set_arch_to_kernel - FIRM_DIR=/usr/share/usb - emake \ - DESTDIR="${D}" \ - INSTALL_MOD_PATH="${D}" \ - HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \ - USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \ - docdir=/usr/share/doc/${PF}/html -} - -src_install() { - set_arch_to_kernel - FIRM_DIR=/usr/share/usb - emake \ - DESTDIR="${D}" \ - INSTALL_MOD_PATH="${D}" \ - HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \ - USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \ - docdir=/usr/share/doc/${PF}/html install - - if use perl; then - einfo "Installing perl module" - cd "${S}"/language/perl || die - DESTDIR=${D} perl-module_src_install - cd "${S}" || die - fi - - echo "KERNEL==\"gpib[0-9]*\", MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules - udev_dorules 99-gpib.rules - - dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS - - insinto /etc - newins util/templates/gpib.conf gpib.conf - newins util/templates/gpib.conf gpib.conf.example - - if use pcmcia; then - dodir /etc/pcmcia - insinto /etc/pcmcia - doins "${S}"/etc/pcmcia/* - fi - - if use firmware; then - insinto "${FIRM_DIR}"/agilent_82357a - doins "${WORKDIR}"/gpib_firmware-2006-11-12/agilent_82357a/* - - insinto "${FIRM_DIR}"/ni_gpib_usb_b - doins "${WORKDIR}"/gpib_firmware-2006-11-12/ni_gpib_usb_b/* - - insinto /usr/share/linux-gpib/hp_82341 - # do not install precompiled generate_firmware - doins "${WORKDIR}"/gpib_firmware-2006-11-12/hp_82341/{*.bin,README} - fi -} - -pkg_preinst () { - linux-mod_pkg_preinst - use perl && perl_set_version - enewgroup gpib -} - -pkg_postinst () { - linux-mod_pkg_postinst - - einfo "You need to run the 'gpib_config' utility to setup the driver before" - einfo "you can use it. In order to do it automatically you can add to your" - einfo "start script something like this (supposing the appropriate driver" - einfo "is loaded on the startup):" - einfo " gpib_config --minor 0" - einfo "" - einfo "To give a user access to the computer's gpib board you will have to add" - einfo "them to the group 'gpib' or, you could change the permissions on the device" - einfo "files /dev/gpib[0-15] to something you like better, using 'chmod'." - einfo "" - einfo "Edit /etc/gpib.conf to match your interface board, and any devices you wish" - einfo "to open via ibfind(). See the documentation in /usr/share/linux-gpib/html for" - einfo "more information." - einfo "" - - if use pcmcia; then - einfo "For PCMCIA cards:" - einfo "All files needed for a PCMCIA board were copied to /etc/pcmcia." - einfo "You may wish to edit the options passed to the gpib_config call in the" - einfo "/etc/pcmcia/linux-gpib-pcmcia script." - einfo "You may need to send a SIGHUP signal to the cardmgr daemon to force it" - einfo "to reload the files in /etc/pcmcia (alternatively you could use your" - einfo "pcmcia init.d script to restart the cardmgr, or you could just reboot)." - einfo "The driver module will be loaded as needed by the cardmgr." - einfo "" - fi - - if use firmware; then - einfo "For Agilent (HP) 82341C and 82341D cards:" - einfo "The firmware for these boards is uploaded by passing the appropriate" - einfo "firmware file from /usr/share/linux-gpib/hp_82341 directory to" - einfo "gpib_config using the -I or --init-data command line option. Example:" - einfo "gpib_config --minor 0 --init-data \\" - einfo "/usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin" - einfo "" - fi - -} diff --git a/sci-libs/linux-gpib/linux-gpib-3.2.21.ebuild b/sci-libs/linux-gpib/linux-gpib-3.2.21.ebuild deleted file mode 100644 index e00810b..0000000 --- a/sci-libs/linux-gpib/linux-gpib-3.2.21.ebuild +++ /dev/null @@ -1,183 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -EAPI=5 - -PERL_EXPORT_PHASE_FUNCTIONS=no -GENTOO_DEPEND_ON_PERL=no -PYTHON_COMPAT=( python2_7 ) - -inherit eutils linux-mod autotools perl-module python-single-r1 toolchain-funcs udev user - -DESCRIPTION="Kernel module and driver library for GPIB (IEEE 488.2) hardware" -HOMEPAGE="http://linux-gpib.sourceforge.net/"; -SRC_URI="mirror://sourceforge/linux-gpib/${P}.tar.gz - firmware? ( http://linux-gpib.sourceforge.net/firmware/gpib_firmware-2006-11-12.tar.gz )" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="amd64 ~arm ~x86" -IUSE="isa pcmcia static debug guile perl php python tcl doc firmware" - -COMMONDEPEND=" - tcl? ( dev-lang/tcl:0= ) - guile? ( dev-scheme/guile:12 ) - perl? ( dev-lang/perl:= ) - php? ( dev-lang/php:= ) - python? ( ${PYTHON_DEPS} ) - firmware? ( sys-apps/fxload )" -RDEPEND="${COMMONDEPEND}" -DEPEND="${COMMONDEPEND} - virtual/pkgconfig - doc? ( app-text/docbook-sgml-utils ) - perl? ( virtual/perl-ExtUtils-MakeMaker )" - -REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )" - -PATCHES=( - "${FILESDIR}"/${PN}-3.2.21-build.patch - "${FILESDIR}"/${PN}-3.2.16-perl.patch - "${FILESDIR}"/${PN}-3.2.16-reallydie.patch -) - -pkg_setup () { - use perl && perl_set_version - use python && python_setup - linux-mod_pkg_setup - - if kernel_is -lt 2 6 8; then - die "Kernel versions older than 2.6.8 are not supported." - fi - - # https://sourceforge.net/tracker/?func=detail&aid=3285657&group_id=42378&atid=432940 - if use pcmcia && kernel_is -ge 2 6 38; then - die "pcmcia support is broken on kernels newer 2.6.38" - fi -} - -src_prepare () { - epatch ${PATCHES[@]} - epatch_user - eautoreconf -} - -src_configure() { - set_arch_to_kernel - econf \ - $(use_enable isa) \ - $(use_enable pcmcia) \ - $(use_enable static) \ - $(use_enable debug driver-debug) \ - $(use_enable guile guile-binding) \ - $(use_enable perl perl-binding) \ - $(use_enable php php-binding) \ - $(use_enable python python-binding) \ - $(use_enable tcl tcl-binding) \ - $(use_enable doc documentation) \ - --with-linux-srcdir=${KV_DIR} -} - -src_compile() { - set_arch_to_kernel - FIRM_DIR=/usr/share/usb - emake \ - DESTDIR="${D}" \ - INSTALL_MOD_PATH="${D}" \ - HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \ - USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \ - docdir=/usr/share/doc/${PF}/html -} - -src_install() { - set_arch_to_kernel - FIRM_DIR=/usr/share/usb - emake \ - DESTDIR="${D}" \ - INSTALL_MOD_PATH="${D}" \ - HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \ - USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \ - docdir=/usr/share/doc/${PF}/html install - - if use perl; then - einfo "Installing perl module" - cd "${S}"/language/perl || die - DESTDIR=${D} perl-module_src_install - cd "${S}" || die - fi - - echo "KERNEL==\"gpib[0-9]*\", MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules - udev_dorules 99-gpib.rules - - dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS - - insinto /etc - newins util/templates/gpib.conf gpib.conf - newins util/templates/gpib.conf gpib.conf.example - - if use pcmcia; then - dodir /etc/pcmcia - insinto /etc/pcmcia - doins "${S}"/etc/pcmcia/* - fi - - if use firmware; then - insinto "${FIRM_DIR}"/agilent_82357a - doins "${WORKDIR}"/gpib_firmware-2006-11-12/agilent_82357a/* - - insinto "${FIRM_DIR}"/ni_gpib_usb_b - doins "${WORKDIR}"/gpib_firmware-2006-11-12/ni_gpib_usb_b/* - - insinto /usr/share/linux-gpib/hp_82341 - # do not install precompiled generate_firmware - doins "${WORKDIR}"/gpib_firmware-2006-11-12/hp_82341/{*.bin,README} - fi -} - -pkg_preinst () { - linux-mod_pkg_preinst - use perl && perl_set_version - enewgroup gpib -} - -pkg_postinst () { - linux-mod_pkg_postinst - - einfo "You need to run the 'gpib_config' utility to setup the driver before" - einfo "you can use it. In order to do it automatically you can add to your" - einfo "start script something like this (supposing the appropriate driver" - einfo "is loaded on the startup):" - einfo " gpib_config --minor 0" - einfo "" - einfo "To give a user access to the computer's gpib board you will have to add" - einfo "them to the group 'gpib' or, you could change the permissions on the device" - einfo "files /dev/gpib[0-15] to something you like better, using 'chmod'." - einfo "" - einfo "Edit /etc/gpib.conf to match your interface board, and any devices you wish" - einfo "to open via ibfind(). See the documentation in /usr/share/linux-gpib/html for" - einfo "more information." - einfo "" - - if use pcmcia; then - einfo "For PCMCIA cards:" - einfo "All files needed for a PCMCIA board were copied to /etc/pcmcia." - einfo "You may wish to edit the options passed to the gpib_config call in the" - einfo "/etc/pcmcia/linux-gpib-pcmcia script." - einfo "You may need to send a SIGHUP signal to the cardmgr daemon to force it" - einfo "to reload the files in /etc/pcmcia (alternatively you could use your" - einfo "pcmcia init.d script to restart the cardmgr, or you could just reboot)." - einfo "The driver module will be loaded as needed by the cardmgr." - einfo "" - fi - - if use firmware; then - einfo "For Agilent (HP) 82341C and 82341D cards:" - einfo "The firmware for these boards is uploaded by passing the appropriate" - einfo "firmware file from /usr/share/linux-gpib/hp_82341 directory to" - einfo "gpib_config using the -I or --init-data command line option. Example:" - einfo "gpib_config --minor 0 --init-data \\" - einfo "/usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin" - einfo "" - fi - -}
