commit: ff458e121b5a8093c1c63f0caa3f21478dc34854 Author: Conrad Kostecki <conikost <AT> gentoo <DOT> org> AuthorDate: Tue Feb 18 02:37:27 2025 +0000 Commit: Conrad Kostecki <conikost <AT> gentoo <DOT> org> CommitDate: Tue Feb 18 02:37:42 2025 +0000 URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ff458e12
sys-power/apcupsd: drop 3.14.14-r3 Closes: https://bugs.gentoo.org/948418 Signed-off-by: Conrad Kostecki <conikost <AT> gentoo.org> sys-power/apcupsd/apcupsd-3.14.14-r3.ebuild | 158 ------------------------- sys-power/apcupsd/files/apcupsd.powerfail.init | 17 --- 2 files changed, 175 deletions(-) diff --git a/sys-power/apcupsd/apcupsd-3.14.14-r3.ebuild b/sys-power/apcupsd/apcupsd-3.14.14-r3.ebuild deleted file mode 100644 index ba2ab5506de5..000000000000 --- a/sys-power/apcupsd/apcupsd-3.14.14-r3.ebuild +++ /dev/null @@ -1,158 +0,0 @@ -# Copyright 1999-2024 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI="7" - -inherit linux-info systemd udev tmpfiles - -DESCRIPTION="APC UPS daemon with integrated tcp/ip remote shutdown" -HOMEPAGE="http://www.apcupsd.org/"; -SRC_URI="https://downloads.sourceforge.net/apcupsd/${P}.tar.gz"; - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="amd64 ~arm ~arm64 ppc ~riscv x86" -IUSE="selinux snmp +usb +modbus cgi" - -DEPEND=">=sys-apps/util-linux-2.23[tty-helpers(-)] - cgi? ( >=media-libs/gd-1.8.4 ) - modbus? ( usb? ( virtual/libusb:0 ) ) - snmp? ( >=net-analyzer/net-snmp-5.7.2 )" - -RDEPEND="${DEPEND} - virtual/mailx - selinux? ( sec-policy/selinux-apcupsd )" - -CONFIG_CHECK="~USB_HIDDEV ~HIDRAW" -ERROR_USB_HIDDEV="CONFIG_USB_HIDDEV: needed to access USB-attached UPSes" -ERROR_HIDRAW="CONFIG_HIDRAW: needed to access USB-attached UPSes" - -DOCS=( ChangeLog ReleaseNotes ) -HTML_DOCS=( doc/manual ) - -PATCHES=( - "${FILESDIR}"/${PN}-3.14.9-aliasing.patch - "${FILESDIR}"/${PN}-3.14.9-close-on-exec.patch - "${FILESDIR}"/${PN}-3.14.9-commfailure.patch - "${FILESDIR}"/${PN}-3.14.9-fix-nologin.patch - "${FILESDIR}"/${PN}-3.14.9-gapcmon.patch - "${FILESDIR}"/${PN}-3.14.9-wall-on-mounted-usr.patch -) - -pkg_setup() { - if use kernel_linux && use usb && linux_config_exists ; then - check_extra_config - fi -} - -src_prepare() { - default - # skip this specific doc step as produced files never installed - # this avoids calling the col command not available on musl based system. - sed -i "/^SUBDIRS/ s/doc//g" Makefile || die -} - -src_configure() { - local myconf - - use cgi && myconf="${myconf} --enable-cgi --with-cgi-bin=/usr/libexec/${PN}/cgi-bin" - - if use usb ; then - myconf="${myconf} --with-upstype=usb --with-upscable=usb --enable-usb --with-dev=" - use modbus && myconf="${myconf} --enable-modbus-usb" - else - myconf="${myconf} --with-upstype=apcsmart --with-upscable=smart --disable-usb" - use modbus || myconf="${myconf} --disable-modbus" - fi - - # We force the DISTNAME to gentoo so it will use gentoo's layout also - # when installed on non-linux systems. - econf \ - --sbindir=/sbin \ - --sysconfdir=/etc/apcupsd \ - --with-pwrfail-dir=/etc/apcupsd \ - --with-lock-dir=/run/apcupsd \ - --with-pid-dir=/run/apcupsd \ - --with-log-dir=/var/log \ - --with-nis-port=3551 \ - --enable-net --enable-pcnet \ - --with-distname=gentoo \ - $(use_enable snmp) \ - --disable-gapcmon \ - ${myconf} \ - APCUPSD_MAIL=$(type -p mail) -} - -src_compile() { - # Workaround for bug #280674; upstream should really just provide - # the text files in the distribution, but I wouldn't count on them - # doing that anytime soon. - MANPAGER=$(type -p cat) \ - emake VERBOSE=2 -} - -src_install() { - emake DESTDIR="${D}" VERBOSE=2 install - rm "${ED}"/etc/init.d/halt || die - - insinto /etc/apcupsd - newins examples/safe.apccontrol safe.apccontrol - doins "${FILESDIR}"/apcupsd.conf - - doman doc/*.8 doc/*.5 - - einstalldocs - - rm "${ED}"/etc/init.d/apcupsd || die - newinitd "${FILESDIR}/${PN}.init" "${PN}" - newinitd "${FILESDIR}/${PN}.powerfail.init" "${PN}".powerfail - - systemd_dounit "${FILESDIR}"/${PN}.service - dotmpfiles "${FILESDIR}"/${PN}-tmpfiles.conf - - # remove hal settings, we don't really want to have it still around. - rm -r "${D}"/usr/share/hal || die - - # replace it with our udev rules if we're in Linux - if use kernel_linux ; then - udev_newrules "${FILESDIR}"/apcupsd-udev.rules 60-${PN}.rules - fi - -} - -pkg_postinst() { - use kernel_linux && udev_reload - - tmpfiles_process ${PN}-tmpfiles.conf - - if use cgi ; then - elog "The cgi-bin directory for ${PN} is /usr/libexec/${PN}/cgi-bin." - elog "Set up your ScriptAlias or symbolic links accordingly." - fi - - elog "" - elog "Since version 3.14.0 you can use multiple apcupsd instances to" - elog "control more than one UPS in a single box with openRC." - elog "To do this, create a link between /etc/init.d/apcupsd to a new" - elog "/etc/init.d/apcupsd.something, and it will then load the" - elog "configuration file at /etc/apcupsd/something.conf." - elog "" - - elog 'If you want apcupsd to power off your UPS when it' - elog 'shuts down your system in a power failure, you must' - elog 'add apcupsd.powerfail to your shutdown runlevel:' - elog '' - elog ' \e[01m rc-update add apcupsd.powerfail shutdown \e[0m' - elog '' - - if use kernel_linux; then - elog "Starting from version 3.14.9-r1, ${PN} installs udev rules" - elog "for persistent device naming. If you have multiple UPS" - elog "connected to the machine, you can point them to the devices" - elog "in /dev/apcups/by-id directory." - fi -} - -pkg_postrm() { - use kernel_linux && udev_reload -} diff --git a/sys-power/apcupsd/files/apcupsd.powerfail.init b/sys-power/apcupsd/files/apcupsd.powerfail.init deleted file mode 100644 index be591f86c185..000000000000 --- a/sys-power/apcupsd/files/apcupsd.powerfail.init +++ /dev/null @@ -1,17 +0,0 @@ -#!/sbin/openrc-run -# Copyright 2009 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -description='Signal the UPS to kill power in a power failure condition' - -depend() { - need mount-ro -} - -start() { - if [ "$(runlevel | cut -d' ' -f2)" = "0" -a -f /etc/apcupsd/powerfail ] ; then - ebegin 'Signaling UPS to kill power' - /sbin/apcupsd --killpower - eend $? - fi -}
