Congratulations! As champion, I think the next steps are: 1 - Xiangdong, Can you confirm the list of mentors on the proposal is accurate?
2 - Also Xiangdong, Is there anyone else that stepped forward as a mentor during the voting process that the project wants the IPMC to approve? 3 - Justin, I think you have to request the creation of the podling and then I as champion work on things like the meta data file from this page, https://incubator.apache.org/policy/incubation.html, correct? Regards, KAM -- Kevin A. McGrail VP Fundraising, Apache Software Foundation Chair Emeritus Apache SpamAssassin Project https://www.linkedin.com/in/kmcgrail - 703.798.0171 On Wed, Nov 14, 2018 at 6:29 AM hxd <hxd...@qq.com> wrote: > Hi, > > With 8 +1 binding votes, 2 +1 non-binding votes and No +/-0 or -1 votes, > this VOTE passes. > > Thanks to everyone who voted! > > Bellow is a voting tally: > > Binding > Von Gosling > Christofer Dutz > Kevin A. McGrail > Felix Cheung > Matt Sticker > Joe Witt > Justin Mclean > Willem Jiang > > > Non-binding > Sheng Wu > Yang Bo > > The vote thread: > https://lists.apache.org/thread.html/077f029ab2b52a2b19fc8d41c07438f660a8e93dd87b3895d262263c@%3Cgeneral.incubator.apache.org%3E > < > https://lists.apache.org/thread.html/077f029ab2b52a2b19fc8d41c07438f660a8e93dd87b3895d262263c@%3Cgeneral.incubator.apache.org%3E> > > The proposal: https://wiki.apache.org/incubator/IoTDBProposal < > https://wiki.apache.org/incubator/IoTDBProposal> > > Thanks, > > Xiangdong Huang > > > > 在 2018年11月7日，下午3:46，hxd <hxd...@qq.com> 写道： > > > > Hi, > > > > Sorry for the previous mail with bad format. > > I'd like to call a VOTE to accept IoTDB project, a database for managing > large amounts of time series data from IoT sensors in industrial > applications, into the Apache Incubator. > > The full proposal is available on the wiki: > https://wiki.apache.org/incubator/IoTDBProposal > > and it is also attached below for your convenience. > > > > Please cast your vote: > > > > [ ] +1, bring IoTDB into Incubator > > [ ] +0, I don't care either way, > > [ ] -1, do not bring IoTDB into Incubator, because... > > > > The vote will open at least for 72 hours. > > > > Thanks, > > Xiangdong Huang. > > > > > > = IoTDB Proposal = > > v0.1.1 > > > > > > == Abstract == > > IoTDB is a data store for managing large amounts of time series data > such as timestamped data from IoT sensors in industrial applications. > > > > == Proposal == > > IoTDB is a database for managing large amount of time series data with > columnar storage, data encoding, pre-computation, and index techniques. It > has SQL-like interface to write millions of data points per second per node > and is optimized to get query results in few seconds over trillions of data > points. It can also be easily integrated with Apache Hadoop MapReduce and > Apache Spark for analytics. > > > > == Background == > > > > A new class of data management system requirements is becoming > increasingly important with the rise of the Internet of Things. There are > some database systems and technologies aimed at time series data > management. For example, Gorilla and InfluxDB which are mainly built for > data centers and monitoring application metrics. Other systems, for > example, OpenTSDB and KairosDB, are built on Apache HBase and Apache > Cassandra, respectively. > > > > However, many applications for time series data management have more > requirements especially in industrial applications as follows: > > > > * Supporting time series data which has high data frequency. For > example, a turbine engine may generate 1000 points per second (i.e., > 1000Hz), while each CPU only reports 1 data points per 5 seconds in a data > center monitoring application. > > > > * Supporting scanning data multi-resolutionally. For example, > aggregation operation is important for time series data. > > > > * Supporting special queries for time series, such as pattern matching, > time series segmentation, time-frequency transformation and frequency query. > > > > * Supporting a large number of monitoring targets (i.e. time series). > An excavator may report more than 1000 time series, for example, revolving > speed of the motor-engine, the speed of the excavator, the accelerated > speed, the temperature of the water tank and so on, while a CPU or an > application monitor has much fewer time series. > > > > * Optimization for out-of-order data points. In the industrial sector, > it is common that equipment sends data using the UDP protocol rather than > the TCP protocol. Sometimes, the network connect is unstable and parts of > the data will be buffered for later sending. > > > > * Supporting long-term storage. Historical data is precious for > equipment manufacturers. Therefore, removing or unloading historical data > is highly desired for most industrial applications. The database system > must not only support fast retrieval of historical data, but also should > guarantee that the historical data does not impact the processing speed for > “hot” or current data. > > > > * Supporting online transaction processing (OLTP) as well as complex > analytics. It is obvious that supporting analyzing from the data files > using Apache Spark/Apache Hadoop MapReduce directly is better than > transforming data files to another file format for Big Data analytics. > > > > * Flexible deployment either on premise or in the cloud. IoTDB is as > simple and can be deployed on a Raspberry Pi handling hundreds of time > series. Meanwhile, the system can be also deployed in the cloud so that it > supports tens of millions ingestions per second, OLTP queries in > milliseconds, and analytics using Apache Spark/Apache Hadoop MapReduce. > > > > * * (1) If users deploy IoTDB on a device, such as a Raspberry Pi, a > wind turbine, or a meteorological station, the deployment of the chosen > database is designed to be simple. A device may have hundreds of time > series (but less than a thousand time series) and the database needs to > handle them. > > * * (2) When deploying IoTDB in a data center, the computational > resources (i.e., the hardware configuration of servers) is not a problem > when compared to a Raspberry Pi. In this deployment, IoTDB can use more > computation resources, and has the ability to handle more time seires > (e.g., millions of time series). > > > > Based on these requirements, we developed IoTDB, a new data store system > for managing time series data. > > > > IoTDB started as a Tsinghua University research project. IoTDB's > developer community has also grown to include additional institutions, for > example, universities (e.g., Fudan University), research labs (e.g, NEL-BDS > lab), and corporations (e.g., K2Data, Tencent). Funding has been provided > by various institutions including the National Natural Science Foundation > of China, and industry sponsors, such as Lenovo and K2Data. > > > > == Rationale == > > Because there is no existed open-sourced time series databases covering > all the above requirements, we developed IoTDB. As the system matures, we > are seeking a long-term home for the project. We believe the Apache > Software Foundation would be an ideal fit. Also joining Apache will help > coordinate and improve the development effort of the growing number of > organizations which contribute to IoTDB improving the diversity of our > community. > > > > IoTDB contains multiple modules, which are classified into categories: > > > > * '''TsFile Format''': TsFile is a new columnar file format. > > * '''Adaptor for Analytics and Visualization''': Integrating TsFile > with Apache Hadoop HDFS, Apache Hadoop MapReduce and Apache Spark. Examples > of integrating IoTDB with Apache Kafka, Apache Storm and Grafana are also > provided. > > * '''IoTDB Engine''': An engine which consists of SQL parser, query > plan generator, memtable, authentication and authorization,write ahead log > (WAL), crash recovery, out-of-order data handler, and index for aggregation > and pattern matching. The engine stores system data in TsFile format. > > * '''IoTDB JDBC''': An implementation of Java Database Connectivity > (JDBC) for clients to connect to IoTDB using Java. > > > > === TsFile Format === > > > > TsFile format is a columnar store, which is similar with Apache Parquet > and Apache CarbonData. It has the concepts of Chunk Group, Column Chunk, > Page and Footer. Comparing with Apache Parquet and Apache CarbonData, it is > designed and optimized for time series: > > > > ==== Time Series Friendly Encoding ==== > > IoTDB currently supports run length encoding (RLE), delta-of-delta > encoding, and Facebook's Gorilla encoding. > > > > Lossy encoding methods (e.g., Piecewise Linear Approximation (PLA) and > time-frequency transformation are works-in-progress. > > > > > > ==== Chunk Group ==== > > The data part of a TsFile consists of many Chunk Groups. Each Chunk > Group stores the data of a device at a time interval. A Chunk Group is > similar to the row group in Apache Parquet, while there are some > constraints of the time dimension: For each device, the time intervals of > different Chunk Groups are not overlapped and the latter Chunk Group always > has a larger timestamp. > > > > Given a TsFile and a query with a time range filter, the query process > can terminate scanning data once it reads data points whose timestamp > reaches the time limit of the filter. We call the feature ''fast-return'' > and it makes the time range query in a TsFile very efficient. > > > > > > > > ==== Different Column Chunk Format (Unnecessary the Repetition (R) and > Definition (D) Fields) ==== > > > > While Apache Parquet and Apache CarbonData support complex data types, > e.g., nested data and sparse columns, TsFile is exclusively designed for > time series whose data model is \<device_id, series_id, timestamp, value\>. > > > > In a `Chunk Group`, each time series is a `Column Chunk`. Even though > these time series belong to the same device, the data points in different > time series are not aligned in the time dimension originally. > > > > For example, if you have a device with 2 sensors on the same data > collection frequencies, sensor 1 may collect data at time 1521622662000 > while the other one collects data at time 1521622662001 (delta=1ms). > Therefore, each Column Chunk has its timestamps and values, which is quite > different from Apache Parquet and Apache CarbonData. Because we store the > time column along with each value column instead of making different chunks > share the same time column for the sake of diverse data frequency for > different time series, we do not store any null value on disk to align > across time series. Besides, we do not need to attach `repetition` (R) and > `definition` (D) fields on each value. Therefore, the disk space is saved > and the query latency is reduced (because we do not align data by > calculating R and D fields). > > > > > > ==== Domain Specific Information in Each Page ==== > > Similar to Apache Parquet and Apache CarbonData, a `Column Chunk` > consists of several `Pages`, and each `Page` has a `Page header`. The `Page > header` is a summary of the data in the page. > > > > Because TsFile is optimized for time series, the page header contains > more domain specific information, such as the minimal and maximal value, > the minimal and the maximal timestamp, the frequency and so on. TsFile can > even store the histogram of values in the page header. > > > > This header information helps IoTDB in speeding up queries by skipping > unnecessary pages. > > > > > > === Adaptor for Analytics === > > The TsFile provides: > > > > * InputFormat/OutputFormat interfaces for Reading/Writing data. > > * Deep integration with Apache Spark/Hadoop MapReduce including > predicate push-down, column pruning, aggregation push down, etc. So users > can use Apache Spark SQL/HiveQL to connect and query TsFiles. > > > > > > === IoTDB Engine === > > The IoTDB engine is a database engine, which uses TsFile as its storage > file format. The IoTDB Engine supports SQL-like query plus many useful > functions: > > > > * Tree-based time series schema > > * Log-Structured Merge (LSM)-based storage > > * Overflow file for out-of-order data > > * Scalable index framework > > * Special queries for time series > > > > ==== Tree-based Time Series Schema ==== > > IoTDB manages all the time series definitions using a tree structure. A > path from the root of the tree to a leaf node represents a time series. > Therefore, the unique id of a time series is a path, e.g., > `root.China.beijing.windFarm1.windTurbine1.speed`. > > > > This kind of schema can express `group by` naturally. For example, > `root.China.beijing.windFarm1.*.speed` represents the speed of all the wind > turbines in wind farm 1 in Beijing, China. > > > > ==== Log-Structured Merge (LSM)-based Storage ==== > > In a time series, the data points should be ordered by their timestamps. > In IoTDB, we use Log-Structured Merge (LSM) based mechanism. Therefore, a > part of the data is stored in memory first and can be called as `memtable`. > At this time, if data points come out-of-order, we resort them in memory. > When this part of data exceeds the configured memory limit, we flush it on > disk as a `Chunk Group` into an unclosed TsFile. Finally, a TsFile may > contain several Chunk Groups, for reducing the number of small data files, > which is helpful to reduce the I/O load of the storage system and reduces > the execution time of a file-merge in LSM. Notice that the data is > time-ordered in one Chunk Group on disk, and this layout is helpful for > fast filtering in one Chunk Group for a query. > > > > Rule 1: In a TsFile, the Chunk Groups of one device are ordered by > timestamp (Rule 1), and it is helpful for fast filtering among Chunk Groups > for a query. > > > > Rule 2: When the size of the unclosed TsFile reaches the threshold > defined in the configuration file, we close the file and generate a new one > to store new arriving data spanning the entire data set. Like many systems > which use LSM-based storage, we never modify a TsFile which has been closed > except for the file-merge process (Rule 2). > > > > Rule 3: To reduce the number of TsFiles involved in a query process, we > guarantee that the data points in different TsFiles are not overlapping on > the time dimension after file mergence (Rule 3). > > > > ==== Overflow File for Out-of-order Data ==== > > When a part of data is flushed on disk (and will form a `Chunk Group` in > a TsFile), the newly arriving data points whose timestamps are smaller than > the largest timestamp in the Tsfile are `out-of-order`. > > > > To store the out-of-order data, we organize all the troublesome > `out-of-order` data point insertions into a special TsFile, named > `UnSequenceTsFile`. In an UnSequenceTsFile, the Chunk Groups of one device > may be overlapping in the time dimension, which violates the Rule 1 and > costs additional time compared to a normal TsFile for query filtering. > > > > There is another special operation: updating all the data points in a > time range, e.g., `update all the speed values of device1 as 0 where the > data time is in [1521622000000, 1521622662000]`. The operation is called > when: (1) a sensor malfunctions and the database receives wrong data for a > period; (2) we may want to reset all the records. Many NoSQL time series > databases do not support such an operation. To support the operation in > IoTDB, we use a tree-based structure, Treap, to store this part of > operations and store them as `Overflow` files. > > > > Therefore, there are 3 kinds of data files: TsFiles, UnSequenceTsFiles > and Overflow files. TsFiles should store most of the data. The volume of > UnSequenceTsFiles depends on the workload: if there are too many > out-of-order and the time span of out-of-order is huge, the volume will be > large. Overflow files handle fewest data operations but will depend on the > use of the special operations. > > > > ==== LSM-tree ==== > > Normally, LSM-based storage engines merge data files level by level so > that it looks like a tree structure. In this way, data is well organized. > The disadvantage is that data will be read and written several times. If > the tree has 4 levels, each data point will be rewritten at least 4 times. > > > > Currently, we do not merge all the TsFiles into one because (1) the > number of TsFiles is kept lower than many LSM storage engines because a > memtable is mapped to several Chunk Groups rather than a file; (2) > different TsFiles are not overlapping with each other in the time dimension > (because of Rule 3). > > > > As mentioned before, TsFile supports ''fast-return'' to accelerate > queries. However, UnSequenceTsFile and Overflow files do not allow this > feature. The time spans of UnSequenceTsFile, Overflow file andTsFile may be > overlapped, which leads to more files involved in the query process. To > accelerate these queries, there is a merging process to reorganize files in > the background. All the three kinds of files: TsFiles, UnSequenceTsFiles > and Overflow files, are involved in the merging process. The merging > process is implemented using multi-threading, while each thread is > responsible for a series family. > > After merging, only TsFiles are left. These files have non-overlapping > time spans and support the ''fast-return'' feature. > > > > ==== Scalable Index Framework ==== > > We allow users to implement indexes for faster queries. We currently > support an index for pattern matching query (KV-Match index, ICDE 2019). > Another index for fast aggregation (PISA index, CIKM 2016) is a > work-in-progress. > > > > ==== Special Queries ==== > > We currently support `group by time interval` aggregation queries and > `Fill by` operations, which are similar to those of InfluxDB. Time series > segmentation operations and frequency queries are work-in-progress. > > > > == Initial Goals == > > The initial goals are to be open sourced and to integrate with the > Apache development process. Furthermore, we plan for incremental > development, and releases along with the Apache guidelines. > > > > == Current Status == > > We have developed the system for more than 2 years. There are currently > 13k lines of code, some of which are generated by Antlr3 and Thrift. There > are 230 issues which have been solved and more than 1500 commits. > > > > The system has been deployed in the staging environment of the State > Grid Corporation of China to handle ~3 million time series (i.e, ~30,000 > power generation assembly * ~100 sensors) and an equipment service company > in China managing ~2 million time series (i.e, ~20k devices * 100 sensors). > The insertion speed reaches ~2 million points/second/node, which is faster > than InfluxDB, OpenTSDB and Apache Cassandra in our environment. > > > > There are many new features in the works including those mentioned > herein. We will add more analytics functions, improve the data file merge > process, and finish the first released version of IoTDB. > > > > == Meritocracy == > > The IoTDB project operates on meritocratic principles. Developers who > submit more code with higher quality earn more merit. We have used `Issues` > and `Pull Requests` modules on Github for collecting users' suggestions and > patches. Users who submit issues, pull requests, documents and help the > community management are welcomed and encouraged to become committers. > > > > == Community == > > > > The IoTDB project users communicate on Github ( > > https://github.com/thulab/tsfile) . Developers make the communication > on a website which is similar with JIRA (Currently, only registered users > can apply to access the project for communication, url: > https://tower.im/projects/36de8571a0ff4833ae9d7f1c5c400c22/ > > ). We have also introduced IoTDB at many technical conferences. Next, we > will build the mailing list for more convenience, broader communication and > archived discussions. > > > > If IoTDB is accepted for incubation at the Apache Software Foundation, > the primary goal is to build a larger community. We believe that IoTDB will > become a key project for time series data management, and so, we will rely > on a large community of users and developers. > > > > TODO: IoTDB is currently on a private Github repository ( > > https://github.com/thulab/iotdb), while its subproject TsFile (a file > format for storing time series data) is open sourced on Github ( > https://github.com/thulab/tsfile > > ). > > > > == Core Developers == > > IoTDB was initially developed by 2 dozen of students and teachers at > Tsinghua University. Now, more and more developers have joined coming from > other universities: Fudan University, Northwestern Polytechnical University > and Harbin Institute of Technology in China. Other developers come from > business companies such as Lenovo and Microsoft. We will be working to > bring more and more developers into the project making contributions to > IoTDB. > > > > == Relationships with Other Apache Products == > > IoTDB requires some Apache products (Apache Thrift, commons, > collections, httpclient). > > > > IoTDB-Spark-connector and IoTDB-Hadoop-connector have been developed for > supporting analysing time series data by using Apache Spark and MapReduce. > > > > Overall, IoTDB is designed as an open architecture, and it can be > integrated with many other systems in the future. > > > > As mentioned before, in the IoTDB project, we designed a new columnar > file format, called TsFile, which is similar to Apache Parquet. However, > the new file format is optimized for time series data. > > > > > > > > == Known Risks == > > > > === Orphaned Products === > > Given the current level of investment in IoTDB, the risk of the project > being abandoned is minimal. Time series data is more and more important and > there are several constituents who are highly inspired to continue > development. Tsinghua and NEL-BDS Lab relies on IoTDB as a platform for a > large number of long-term research projects. We have deployed IoTDB in some > company's staging environments for future applications. > > > > === Inexperience with Open Source === > > Students and researchers in Tsinghua University have been developing and > using open source software for a long time. It is wonderful to be guided to > join a formal open-source process for students. Some of our committers > > have experiences contributing to open source, for example: > > > > * druid: > > > https://github.com/druid-io/druid/commit/f18cc5df97e5826c2dd8ffafba9fcb69d10a4d44 > > > > * druid: > > > https://github.com/druid-io/druid/commit/aa7aee53ce524b7887b218333166941654788794 > > > > * YCSB: > > https://github.com/brianfrankcooper/YCSB/pull/776 > > > > > > Additionally, several ASF veterans and industry veterans have agreed to > mentor the project and are listed in this proposal. The project will rely > on their guidance and collective wisdom to quickly transition the entire > team of initial committers towards practicing the Apache Way. > > > > > > === Reliance on Salaried Developers === > > Most of current developers are students and researchers/professors in > universities, and their researches focus on big data management and > analytics. It is unlikely that they will change their research focus away > from big data management. We will work to ensure that the ability for the > project to continuously be stewarded and to proceed forward independent of > salaried developers is continued. > > > > === An Excessive Fascination with the Apache Brand === > > Most of the initial developers come from Tsinghua University with no > intent to use the Apache brand for profit. We have no plans for making use > of Apache brand in press releases nor posting billboards advertising > acceptance of IoTDB into Apache Incubator. > > > > > > == Initial Source == > > IoTDB's github address and some required dependencies: > > > > * The storage file format: > > https://github.com/thulab/tsfile > > > > * Adaptor for Apache Hadoop MapReduce: > > https://github.com/thulab/tsfile-hadoop-connector > > > > * Adaptor for Apache Spark: > > https://github.com/thulab/tsfile-spark-connector > > > > * Adaptor for Grafana: > > https://github.com/thulab/iotdb-grafana > > > > * The database engine: > > https://github.com/thulab/iotdb > > (private project up to now) > > * The client driver: > > https://github.com/thulab/iotdb-jdbc > > > > > > > > === External Dependencies === > > To the best of our knowledge, all dependencies of IoTDB are distributed > under Apache compatible licenses. Upon acceptance to the incubator, we > would begin a thorough analysis of all transitive dependencies to verify > this fact and introduce license checking into the build and release process. > > > > == Documentation == > > * Documentation for TsFile: > > https://github.com/thulab/tsfile/wiki > > > > * Documentation for IoTDB and its JDBC: > > http://tsfile.org/document > > (Chinese only. An English version is in progress.) > > > > == Required Resources == > > === Mailing Lists === > > * > > priv...@iotdb.incubator.apache.org > > > > * > > d...@iotdb.incubator.apache.org > > > > * > > comm...@iotdb.incubator.apache.org > > > > > > === Git Repositories === > > * > > https://git-wip-us.apache.org/repos/asf/incubator-iotdb.git > > > > > > === Issue Tracking === > > * JIRA IoTDB (We currently use the issue management provided by Github > to track issues.) > > > > > > == Initial Committers == > > Tsinghua University, K2Data Company, Lenovo, Microsoft > > > > Jianmin Wang (jimwang at tsinghua dot edu dot cn ) > > > > Xiangdong Huang (sainthxd at gmail dot com) > > > > Jun Yuan (richard_yuan16 at 163 dot com) > > > > Chen Wang ( wang_chen at tsinghua dot edu dot cn) > > > > Jialin Qiao (qjl16 at mails dot tsinghua dot edu dot cn) > > > > Jinrui Zhang (jinrzhan at microsoft dot com) > > > > Rong Kang (kr11 at mails dot tsinghua dot edu dot cn) > > > > Tian Jiang（jiangtia18 at mails dot tsinghua dot edu dot cn） > > > > Shuo Zhang (zhangshuo at k2data dot com dot cn) > > > > Lei Rui (rl18 at mails dot tsinghua dot edu dot cn) > > > > Rui Liu (liur17 at mails dot tsinghua dot edu dot cn) > > > > Kun Liu (liukun16 at mails dot tsinghua dot edu dot cn) > > > > Gaofei Cao (cgf16 at mails dot tsinghua dot edu dot cn) > > > > Xinyi Zhao (xyzhao16 at mails dot tsinghua dot edu dot cn) > > > > Dongfang Mao (maodf17 at mails dot tsinghua dot edu dot cn) > > > > Tianan Li(lta18 at mails dot tsinghua dot edu dot cn) > > > > Yue Su (suy18 at mails dot tsinghua dot edu dot cn) > > > > Hui Dai (daihui_iot at lenovo dot com, yuct_iot at lenovo dot com ) > > > > == Sponsors == > > === Champion === > > Kevin A. McGrail ( > > kmcgr...@apache.org > > ) > > > > === Nominated Mentors === > > Justin Mclean (justin at classsoftware dot com) > > > > Christofer Dutz (christofer.dutz at c-ware dot de) > > > > Willem Jiang (willem.jiang at gmail dot com) > > > > > >
