Kathleen, Thanks much for your comments. I have incorporated them in the next revision of the document.
Thanks, Ayan On 1/19/11 9:24 AM, "[email protected]" <[email protected]> wrote: > I am the assigned Gen-ART reviewer for this draft. For background on > > Gen-ART, please see the FAQ at > > <http://wiki.tools.ietf.org/area/gen/trac/wiki/GenArtfaq>. > > > > Please resolve these comments along with any other Last Call comments you may > receive. > > > > Document: draft-ietf-isis-layer2-09 > > Reviewer: Kathleen Moriarty > > Review Date: 19 January 2011 > > IETF LC End Date: > > IESG Telechat date: (if known) > > > > Summary: The document looks pretty good overall, but there are some edits > that are recommended below. > > > Major issues: > > > > Minor issues: > > > > > > > > Nits/editorial comments: > > Abstract: > > Include name for acronym TLV and IS-IS, both are used before being defined. > > > > Include commas in the following sentence: > > Change from: ³in this document are generic layer 2 additions and specific ones > as needed are² > > To: ³in this document are generic layer 2 additions and specific ones, as > needed, are² > > > > Section 1: > > Paragraph 1, Line 5: > > Change From: Layer > > To: layer > > > > Paragraph 2, Line 2: > > Include acronym for PDU > > > > Paragraph 2, Line 3: > > Change from: ³generic layer 2 additions and specific ones as needed are > defined in² > > To: ³generic layer 2 additions and specific ones, as needed, are defined in² > > > > Section 2: > > Line 1: > > Change from: ³In this section we specify the enhancements² > > To either: ³This section specifies the enhancements² > > Or: ³In this section, we specify the enhancements² > > > > Line 2: > > Change from: ³Layer-2² > > To: ³layer 2² > > OR make the use of this consistent in the document. > > > Section 2.1: > > Bullet 4: > > Make use of ³Layer-2-IS-IS² consistent in the document. > > > > Paragraph 2: > > Note use of Level 1 and Layer 2 in this paragraph to make consistent (dash/no > dash, upper or lower case ³L²) > > > > Define acronym LSP in first line > > > > Section 2.2: > > Line 1: > > Change from: ³Multi Topology aware² > > To: ³Multi-Topology Aware² > > > > Bullet 5 (acronym already defined, it can be completely spelled out or use the > defined acronym): > > Change From: ³sub-TLVs: The MT aware Port Capabilities TLV² > > To: ³sub-TLVs: The MT-PORT_CAP TLV² > > > > Last sentence: Include acronym for IIH. > > _______________________________________________ Gen-art mailing list [email protected] https://www.ietf.org/mailman/listinfo/gen-art
