i am doing a full system simulation for arm arch , Fs.py and I am unable to
login once the system boots ,I don't know what Is the problem .
These are the steps I followed while creating the image on qemu
Install the dependecies
sudo apt install qemu-system-arm qemu-system-mips qemu-efi-aarch64 qemu-kvm
qemu-efi cloud-image-utils
Prepare the EFI partition
dd if=/dev/zero of=flash0.img bs=1M count=64
dd if=/usr/share/qemu-efi/QEMU_EFI.fd of=flash0.img conv=notrunc
dd if=/dev/zero of=flash1.img bs=1M count=64
credentials for the user
cat >user-data <<EOF
#cloud-config
password: thepassword
chpasswd: { expire: False }
ssh_pwauth: True
EOF
cloud-localds user-data.img user-data
then i booted this image on gem5
the below is the log from m5 terminal
please let me know if i can rectify this login methodology so that i can
check point the system
==== m5 terminal: Terminal 0 ====
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd070]
[ 0.000000] Linux version 4.18.0+ (arm-employee@arm-computer) (gcc
version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1)) #1 SMP PREEMPT Wed
Nov 6 14:10:00 GMT 2019
[ 0.000000] Machine model: V2P-CA15
[ 0.000000] Memory limited to 512MB
[ 0.000000] cma: Reserved 16 MiB at 0x000000009f000000
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] DMA32 zone: 2048 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 131072 pages, LIFO batch:31
[ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x3e8
with crng_init=0
[ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s53976 r8192
d32040 u94208
[ 0.000000] pcpu-alloc: s53976 r8192 d32040 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 832075
[ 0.000000] CPU features: enabling workaround for ARM erratum 834220
[ 0.000000] CPU features: enabling workaround for EL2 vector hardening
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024
[ 0.000000] Kernel command line: earlyprintk=pl011,0x1c090000
console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB
root=/dev/sda1
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.000000] Memory: 480148K/524288K available (6910K kernel code, 452K
rwdata, 2312K rodata, 448K init, 217K bss, 27756K reserved, 16384K
cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: GICv2 detected, but range too small and
irqchip.gicv2_force_probe not set
[ 0.000000] clk_gem5_energy_ctrl: No cpu-map in DT! Falling back to old
detection method!
[ 0.000000] clk_gem5_energy_ctrl: No clusters in DT! Falling back to
using CPU topology!
[ 0.000001] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every
89478484971ns
[ 0.000082] arch_timer: Unable to find a suitable frame in timer @
0x000000002a810000
[ 0.000085] Failed to initialize '/timer@2a810000': -22
[ 0.000136] Console: colour dummy device 80x25
[ 0.000140] Calibrating delay loop (skipped) preset value.. 9994.24
BogoMIPS (lpj=19988480)
[ 0.000145] pid_max: default: 32768 minimum: 301
[ 0.000179] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000183] Mountpoint-cache hash table entries: 1024 (order: 1, 8192
bytes)
[ 0.024069] ASID allocator initialised with 128 entries
[ 0.032070] Hierarchical SRCU implementation.
[ 0.048080] smp: Bringing up secondary CPUs ...
[ 0.048084] smp: Brought up 1 node, 1 CPU
[ 0.048087] SMP: Total of 1 processors activated.
[ 0.048090] CPU features: detected: Privileged Access Never
[ 0.048093] CPU features: detected: User Access Override
[ 0.048096] CPU features: detected: 32-bit EL0 Support
[ 0.048099] CPU features: detected: Scalable Vector Extension
[ 0.048428] SVE: maximum available vector length 16 bytes per vector
[ 0.048431] SVE: default vector length 16 bytes per vector
[ 0.048434] CPU: All CPU(s) started at EL2
[ 0.048438] alternatives: patching kernel code
[ 0.049061] devtmpfs: initialized
[ 0.049818] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.049822] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.050507] NET: Registered protocol family 16
[ 0.132158] cpuidle: using governor menu
[ 0.132243] vdso: 2 pages (1 code @ (____ptrval____), 1 data @
(____ptrval____))
[ 0.132247] hw-breakpoint: found 16 breakpoint and 16 watchpoint
registers.
[ 0.132617] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.132620] Serial: AMBA PL011 UART driver
[ 0.132761] OF: amba_device_add() failed (-2) for /watchdog@2a490000
[ 0.132939] OF: amba_device_add() failed (-2) for /watchdog@2b060000
[ 0.133031] 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 13,
base_baud = 0) is a PL011 rev3
[ 0.133287] console [ttyAMA0] enabled
[ 0.133535] 1c0a0000.uart: ttyAMA1 at MMIO 0x1c0a0000 (irq = 14,
base_baud = 0) is a PL011 rev3
[ 0.133721] 1c0b0000.uart: ttyAMA2 at MMIO 0x1c0b0000 (irq = 15,
base_baud = 0) is a PL011 rev3
[ 0.133912] 1c0c0000.uart: ttyAMA3 at MMIO 0x1c0c0000 (irq = 16,
base_baud = 0) is a PL011 rev3
[ 0.134050] OF: amba_device_add() failed (-2) for /kmi@1c060000
[ 0.134102] OF: amba_device_add() failed (-2) for /kmi@1c070000
[ 0.134154] OF: /watchdog@1c0f0000: could not find phandle
[ 0.134159] ERROR: could not get clock /watchdog@1c0f0000:apb_pclk(1)
[ 0.134165] OF: amba_device_add() failed (-2) for /watchdog@1c0f0000
[ 0.134217] OF: /rtc@1c170000: could not find phandle
[ 0.134222] ERROR: could not get clock /rtc@1c170000:apb_pclk(0)
[ 0.134228] OF: amba_device_add() failed (-2) for /rtc@1c170000
[ 0.143873] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.144306] vgaarb: loaded
[ 0.144388] SCSI subsystem initialized
[ 0.148152] libata version 3.00 loaded.
[ 0.148216] usbcore: registered new interface driver usbfs
[ 0.148235] usbcore: registered new interface driver hub
[ 0.148250] usbcore: registered new device driver usb
[ 0.148276] pps_core: LinuxPPS API ver. 1 registered
[ 0.148280] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 0.148290] PTP clock support registered
[ 0.152247] NET: Registered protocol family 2
[ 0.152403] tcp_listen_portaddr_hash hash table entries: 256 (order: 0,
4096 bytes)
[ 0.152412] TCP established hash table entries: 4096 (order: 3, 32768
bytes)
[ 0.152439] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.152467] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.152484] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.152493] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.152529] NET: Registered protocol family 1
[ 0.164309] RPC: Registered named UNIX socket transport module.
[ 0.164313] RPC: Registered udp transport module.
[ 0.164318] RPC: Registered tcp transport module.
[ 0.164322] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.164328] PCI: CLS 0 bytes, default 64
[ 0.164507] kvm [1]: SVE system without VHE unsupported. Broken cpu?
[ 0.164866] workingset: timestamp_bits=62 max_order=17 bucket_order=0
[ 0.167257] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.169692] fuse init (API version 7.27)
[ 0.170180] io scheduler noop registered
[ 0.170253] io scheduler cfq registered (default)
[ 0.170258] io scheduler mq-deadline registered
[ 0.170263] io scheduler kyber registered
[ 0.170292] atomic64_test: passed
[ 0.170659] pci-host-generic 30000000.pci: host bridge /pci ranges:
[ 0.170666] pci-host-generic 30000000.pci: No bus range found for
/pci, using [bus 00-ff]
[ 0.170673] pci-host-generic 30000000.pci: Parsing ranges property...
[ 0.170682] pci-host-generic 30000000.pci: IO 0x2f000000..0x2f00ffff
-> 0x00000000
[ 0.170692] pci-host-generic 30000000.pci: MEM 0x40000000..0x7fffffff
-> 0x00000000
[ 0.170711] pci-host-generic 30000000.pci: ECAM at [mem
0x30000000-0x3fffffff] for [bus 00-ff]
[ 0.170771] pci-host-generic 30000000.pci: PCI host bridge to bus 0000:00
[ 0.170778] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.170785] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.170792] pci_bus 0000:00: root bus resource [mem
0x40000000-0x7fffffff] (bus address [0x00000000-0x3fffffff])
[ 0.170799] pci_bus 0000:00: scanning bus
[ 0.170816] pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
[ 0.170825] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
[ 0.170833] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
[ 0.170840] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
[ 0.170847] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
[ 0.170855] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
[ 0.170863] pci 0000:00:01.0: reg 0x30: [mem 0x40000000-0x400007ff pref]
[ 0.171146] pci_bus 0000:00: fixups for bus
[ 0.171151] pci_bus 0000:00: bus scan returning with max=00
[ 0.171159] pci 0000:00:01.0: BAR 6: assigned [mem 0x40000000-0x400007ff
pref]
[ 0.171166] pci 0000:00:01.0: BAR 4: assigned [io 0x1000-0x100f]
[ 0.171174] pci 0000:00:01.0: BAR 0: assigned [io 0x1010-0x1017]
[ 0.171181] pci 0000:00:01.0: BAR 2: assigned [io 0x1018-0x101f]
[ 0.171188] pci 0000:00:01.0: BAR 1: assigned [io 0x1020-0x1023]
[ 0.171196] pci 0000:00:01.0: BAR 3: assigned [io 0x1024-0x1027]
[ 0.172806] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.180408] ata_piix 0000:00:01.0: assign IRQ: got 23
[ 0.180414] ata_piix 0000:00:01.0: version 2.13
[ 0.180421] ata_piix 0000:00:01.0: enabling device (0000 -> 0001)
[ 0.180442] ata_piix 0000:00:01.0: enabling bus mastering
[ 0.184163] scsi host0: ata_piix
[ 0.188164] scsi host1: ata_piix
[ 0.188219] ata1: PATA max UDMA/33 cmd 0x1010 ctl 0x1020 bmdma 0x1000
irq 23
[ 0.188225] ata2: PATA max UDMA/33 cmd 0x1018 ctl 0x1024 bmdma 0x1008
irq 23
[ 0.188409] libphy: Fixed MDIO Bus: probed
[ 0.188425] e1000: Intel(R) PRO/1000 Network Driver - version
7.3.21-k8-NAPI
[ 0.188430] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.188450] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.188455] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.188475] igb: Intel(R) Gigabit Ethernet Network Driver - version
5.4.0-k
[ 0.188480] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.188500] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver -
version 5.1.0-k
[ 0.188505] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 0.192184] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function
Network Driver - version 4.1.0-k
[ 0.192190] ixgbevf: Copyright (c) 2009 - 2015 Intel Corporation.
[ 0.196185] i40e: Intel(R) Ethernet Connection XL710 Network Driver -
version 2.3.2-k
[ 0.196191] i40e: Copyright (c) 2013 - 2014 Intel Corporation.
[ 0.200191] ixgb: Intel(R) PRO/10GbE Network Driver - version
1.0.135-k2-NAPI
[ 0.200196] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 0.200216] i40evf: Intel(R) 40-10 Gigabit Virtual Function Network
Driver - version 3.2.2-k
[ 0.200221] Copyright (c) 2013 - 2015 Intel Corporation.
[ 0.204313] usbcore: registered new interface driver usb-storage
[ 0.204491] mousedev: PS/2 mouse device common for all mice
[ 0.204568] gem5 DVFS handler is disabled
[ 0.204572] gem5-energy-ctrl loaded at (____ptrval____)
[ 0.204577] gem5_energy_ctrl_mc: gem5_mc_init: DVFS handler in energy
controller is disabled, ARM gem5 multi-cluster
cpufreq driver will not be registered
[ 0.204854] usbcore: registered new interface driver usbhid
[ 0.204858] usbhid: USB HID core driver
[ 0.204903] NET: Registered protocol family 17
[ 0.348257] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
[ 0.348263] ata1.00: 20971520 sectors, multi 0: LBA
[ 0.348344] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk
n/a PQ: 0 ANSI: 5
[ 0.348531] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.348624] sd 0:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7
GB/10.0 GiB)
[ 0.348640] sd 0:0:0:0: [sda] Write Protect is off
[ 0.348646] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.348670] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.349147] sda: sda1 sda15
[ 0.349430] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.356102] random: fast init done
[ 0.408747] EXT4-fs (sda1): recovery complete
[ 0.408780] EXT4-fs (sda1): mounted filesystem with ordered data mode.
Opts: (null)
[ 0.408790] VFS: Mounted root (ext4 filesystem) on device 8:1.
[ 0.408816] devtmpfs: mounted
[ 0.408890] Freeing unused kernel memory: 448K
[ 0.426365] systemd[1]: System time before build time, advancing clock.
[ 0.428946] systemd[1]: Failed to look up module alias 'autofs4':
Function not implemented
[ 0.431404] systemd[1]: systemd 245.4-4ubuntu3.22 running in system
mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP
+LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS
+KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 0.431523] systemd[1]: Detected architecture arm64.
Welcome to Ubuntu 20.04.6 LTS!
[ 0.432500] systemd[1]: Set hostname to <ubuntu>.
[ 0.535670] random: lvmconfig: uninitialized urandom read (4 bytes read)
[ 0.752617] random: systemd: uninitialized urandom read (16 bytes read)
[ 0.752679] systemd[1]: system-modprobe.slice: unit configures an IP
firewall, but the local system does not support BPF/cgroup firewalling.
[ 0.752689] systemd[1]: (This warning is only shown for the first unit
using IP firewalling.)
[ 0.753020] systemd[1]: Created slice system-modprobe.slice.
[ OK ] Created slice system-modprobe.slice.
[ 0.753123] random: systemd: uninitialized urandom read (16 bytes read)
[ 0.753310] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 0.753542] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ OK ] Created slice system-systemd\x2dfsck.slice.
[ 0.753748] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 0.753868] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 0.753980] systemd[1]: Condition check resulted in Arbitrary Executable
File Formats File System Automount Point being skipped.
[ 0.754091] systemd[1]: Reached target User and Group Name Lookups.
[ OK ] Reached target User and Group Name Lookups.
[ 0.754168] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 0.754232] systemd[1]: Reached target Mounting snaps.
[ OK ] Reached target Mounting snaps.
[ 0.754304] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 0.754445] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ 0.754595] systemd[1]: Listening on LVM2 poll daemon socket.
[ OK ] Listening on LVM2 poll daemon socket.
[ 0.754710] systemd[1]: Listening on multipathd control socket.
[ OK ] Listening on multipathd control socket.
[ 0.754873] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 0.755016] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 0.755116] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 0.758054] systemd[1]: Condition check resulted in Journal Audit Socket
being skipped.
[ 0.758182] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 0.758351] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 0.758585] systemd[1]: Listening on Network Service Netlink Socket.
[ OK ] Listening on Network Service Netlink Socket.
[ 0.758728] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 0.758847] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 0.759582] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 0.760360] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 0.763589] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 0.765530] systemd[1]: Condition check resulted in Kernel Trace File
System being skipped.
[ 0.766546] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 0.769092] systemd[1]: Starting Set the console keyboard layout...
Starting Set the console keyboard layout...
[ 0.769160] systemd[1]: Condition check resulted in Create list of
static device nodes for the current kernel being skipped.
[ 0.769820] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots
etc. using dmeventd or progress polling...
Starting Monitoring of LVM…meventd or progress polling...
[ 0.771201] systemd[1]: Starting Load Kernel Module chromeos_pstore...
Starting Load Kernel Module chromeos_pstore...
[ 0.771279] systemd[1]: Condition check resulted in Load Kernel Module
drm being skipped.
[ 0.780655] systemd[1]: Starting Load Kernel Module efi_pstore...
Starting Load Kernel Module efi_pstore...
[ 0.783380] systemd[1]: Starting Load Kernel Module pstore_blk...
Starting Load Kernel Module pstore_blk...
[ 0.787434] systemd[1]: Starting Load Kernel Module pstore_zone...
Starting Load Kernel Module pstore_zone...
[ 0.788660] systemd[1]: Starting Load Kernel Module ramoops...
Starting Load Kernel Module ramoops...
[ 0.788747] systemd[1]: Condition check resulted in OpenVSwitch
configuration for cleanup being skipped.
[ 0.789115] systemd[1]: Condition check resulted in Set Up Additional
Binary Formats being skipped.
[ 0.789171] systemd[1]: Condition check resulted in File System Check on
Root Device being skipped.
[ 0.792273] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 0.793528] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 0.794270] systemd[1]: Starting udev Coldplug all Devices...
Starting udev Coldplug all Devices...
[ 0.794998] systemd[1]: Starting Uncomplicated firewall...
Starting Uncomplicated firewall...
[ 0.798743] systemd[1]: Mounted Huge Pages File System.
[ OK ] Mounted Huge Pages File System.
[ 0.802465] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 0.802671] systemd[1]: Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Debug File System.
[ 0.803021] systemd[1]: modprobe@chromeos_pstore.service: Succeeded.
[ 0.803220] systemd[1]: Finished Load Kernel Module chromeos_pstore.
[ OK ] Finished Load Kernel Module chromeos_pstore.
[ 0.808252] systemd[1]: modprobe@pstore_blk.service: Succeeded.
[ 0.808441] systemd[1]: Finished Load Kernel Module pstore_blk.
[ OK ] Finished Load Kernel Module pstore_blk.
[ 0.812863] systemd[1]: modprobe@ramoops.service: Succeeded.
[ 0.813052] systemd[1]: Finished Load Kernel Module ramoops.
[ OK ] Finished Load Kernel Module ramoops.
[ 0.834556] systemd[1]: Finished Uncomplicated firewall.
[ OK ] Finished Uncomplicated firewall.
[ 0.835143] systemd[1]: Finished Load Kernel Modules.
[ OK ] Finished Load Kernel Modules.
[ 0.836004] systemd[1]: Mounting FUSE Control File System...
Mounting FUSE Control File System...
[ 0.836175] systemd[1]: Condition check resulted in Kernel Configuration
File System being skipped.
[ 0.837160] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 0.841187] systemd[1]: Mounted FUSE Control File System.
[ OK ] Mounted FUSE Control File System.
[ 0.864806] systemd[1]: modprobe@efi_pstore.service: Succeeded.
[ 0.864992] systemd[1]: Finished Load Kernel Module efi_pstore.
[ OK ] Finished Load Kernel Module efi_pstore.
[ 0.865387] systemd[1]: modprobe@pstore_zone.service: Succeeded.
[ 0.865574] systemd[1]: Finished Load Kernel Module pstore_zone.
[ OK ] Finished Load Kernel Module pstore_zone.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Remount Root and Kernel File Systems.
Starting Load/Save Random Seed...
Starting Create System Users...
[ OK ] Started Journal Service.
Starting Flush Journal to Persistent Storage...
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Finished udev Coldplug all Devices.
Starting udev Wait for Complete Device Initialization...
[ OK ] Started udev Kernel Device Manager.
[ OK ] Finished Set the console keyboard layout.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Found device /dev/ttyAMA0.
[ OK ] Found device M5_IDE_Disk UEFI.
[ OK ] Finished Monitoring of LVM… dmeventd or progress polling.
[ OK ] Finished udev Wait for Complete Device Initialization.
Starting Device-Mapper Multipath Device Controller...
[FAILED] Failed to start Device-Map…r Multipath Device Controller.
See 'systemctl status multipathd.service' for details.
Starting Device-Mapper Multipath Device Controller...
[FAILED] Failed to start Device-Map…r Multipath Device Controller.
See 'systemctl status multipathd.service' for details.
Starting Device-Mapper Multipath Device Controller...
[FAILED] Failed to start Device-Map…r Multipath Device Controller.
See 'systemctl status multipathd.service' for details.
Starting Device-Mapper Multipath Device Controller...
[FAILED] Failed to start Device-Map…r Multipath Device Controller.
See 'systemctl status multipathd.service' for details.
Starting Device-Mapper Multipath Device Controller...
[FAILED] Failed to start Device-Map…r Multipath Device Controller.
See 'systemctl status multipathd.service' for details.
[FAILED] Failed to start Device-Map…r Multipath Device Controller.
See 'systemctl status multipathd.service' for details.
[ OK ] Reached target Local File Systems (Pre).
Mounting Mount unit for core20, revision 2019...
Mounting Mount unit for lxd, revision 24065...
Mounting Mount unit for snapd, revision 20298...
Starting File System Check on /dev/disk/by-label/UEFI...
[FAILED] Failed to mount Mount unit for core20, revision 2019.
See 'systemctl status snap-core20-2019.mount' for details.
[FAILED] Failed to mount Mount unit for snapd, revision 20298.
See 'systemctl status snap-snapd-20298.mount' for details.
[FAILED] Failed to mount Mount unit for lxd, revision 24065.
See 'systemctl status snap-lxd-24065.mount' for details.
[DEPEND] Dependency failed for Serv…snap application lxd.activate.
[DEPEND] Dependency failed for Sock…r snap application lxd.daemon.
[ OK ] Reached target Mounted snaps.
[ OK ] Started File System Check Daemon to report status.
[ OK ] Finished File System Check on /dev/disk/by-label/UEFI.
Mounting /boot/efi...
[ OK ] Mounted /boot/efi.
[ OK ] Reached target Local File Systems.
Starting Set console font and keymap...
Starting Create final runt…dir for shutdown pivot root...
Starting Initial cloud-init job (pre-networking)...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Create Volatile Files and Directories...
[ OK ] Finished Set console font and keymap.
[ OK ] Finished Create final runt…e dir for shutdown pivot root.
[ OK ] Finished Tell Plymouth To Write Out Runtime Data.
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Finished Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Set.
[ OK ] Reached target System Time Synchronized.
[ OK ] Finished Load/Save Random Seed.
[ 8.380000] cloud-init[1275]: Cloud-init v. 23.3.3-0ubuntu0~20.04.1
running 'init-local' at Fri, 22 Dec 2023 04:46:05 +0000. Up 8.27 seconds.
[ 8.380000] cloud-init[1275]: 2023-12-22 04:46:05,218 -
__init__.py[WARNING]: Did not find a fallback interface on openstack.
[ OK ] Finished Initial cloud-init job (pre-networking).
[ OK ] Reached target Network (Pre).
Starting Network Service...
[ OK ] Started Network Service.
Starting Wait for Network to be Configured...
Starting Network Name Resolution...
[ OK ] Finished Wait for Network to be Configured.
Starting Initial cloud-ini… (metadata service crawler)...
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Network.
[ OK ] Reached target Host and Network Name Lookups.
[ 9.624000] cloud-init[1284]: Cloud-init v. 23.3.3-0ubuntu0~20.04.1
running 'init' at Fri, 22 Dec 2023 04:46:06 +0000. Up 9.35 seconds.
[ 9.624000] cloud-init[1284]: ci-info: +++++++++++++++++++++++Net device
info++++++++++++++++++++++++
[ 9.624000] cloud-init[1284]: ci-info:
+--------+------+-----------+-----------+-------+------------+
[ 9.624000] cloud-init[1284]: ci-info: | Device | Up | Address |
Mask | Scope | Hw-Address |
[ 9.624000] cloud-init[1284]: ci-info:
+--------+------+-----------+-----------+-------+------------+
[ 9.624000] cloud-init[1284]: ci-info: | lo | True | 127.0.0.1 |
255.0.0.0 | host | . |
[ 9.624000] cloud-init[1284]: ci-info:
+--------+------+-----------+-----------+-------+------------+
[ 9.624000] cloud-init[1284]: ci-info:
[ 9.624000] cloud-init[1284]: 2023-12-22 04:46:06,458 -
url_helper.py[WARNING]: Exception(s)
[UrlError("HTTPConnectionPool(host='fe80::a9fe:a9fe', port=80): Max retries
exceeded with url: /openstack (Caused by
NewConnectionError('<urllib3.connection.HTTPConnection object at
0x7fbd42ba60>: Failed to establish a new connection: [Errno -9] Address
family for hostname not supported'))"),
UrlError("HTTPConnectionPool(host='169.254.169.254', port=80): Max retries
exceeded with url: /openstack (Caused by
NewConnectionError('<urllib3.connection.HTTPConnection object at
0x7fbd3f43d0>: Failed to establish a new connection: [Errno 101] Network is
unreachable'))")] during request to http://169.254.169.254/openstack,
raising last exception
[ 9.624000] cloud-init[1284]: 2023-12-22 04:46:06,458 -
url_helper.py[ERROR]: Timed out, no response from urls:
['http://[fe80::a9fe:a9fe]/openstack',
'http://169.254.169.254/openstack']
[ 9.624000] cloud-init[1284]: 2023-12-22 04:46:06,458 -
util.py[WARNING]: No active metadata service found
[ 9.976000] cloud-init[1284]: 2023-12-22 04:46:06,814 -
util.py[WARNING]: Failed growpart --dry-run for (/dev/sda, 1)
[ 11.696000] cloud-init[1284]: Generating public/private rsa key pair.
[ 11.696000] cloud-init[1284]: Your identification has been saved in
/etc/ssh/ssh_host_rsa_key
[ 11.696000] cloud-init[1284]: Your public key has been saved in
/etc/ssh/ssh_host_rsa_key.pub
[ 11.696000] cloud-init[1284]: The key fingerprint is:
[ 11.696000] cloud-init[1284]:
SHA256:bZN2k5EYxjCAfED10rWBDTlppDPVhca8Vy936If9hzk root@ubuntu
[ 11.696000] cloud-init[1284]: The key's randomart image is:
[ 11.696000] cloud-init[1284]: +---[RSA 3072]----+
[ 11.696000] cloud-init[1284]: | oo+oo*%=o. |
[ 11.696000] cloud-init[1284]: | o .=*+O= .. |
[ 11.696000] cloud-init[1284]: | .=.ooo.o. o |
[ 11.696000] cloud-init[1284]: | + ....oo +|
[ 11.696000] cloud-init[1284]: | S *.+. =.|
[ 11.696000] cloud-init[1284]: | o o .o o|
[ 11.696000] cloud-init[1284]: | +.|
[ 11.696000] cloud-init[1284]: | E o|
[ 11.696000] cloud-init[1284]: | ..|
[ 11.696000] cloud-init[1284]: +----[SHA256]-----+
[ 11.696000] cloud-init[1284]: Generating public/private dsa key pair.
[ 11.696000] cloud-init[1284]: Your identification has been saved in
/etc/ssh/ssh_host_dsa_key
[ 11.696000] cloud-init[1284]: Your public key has been saved in
/etc/ssh/ssh_host_dsa_key.pub
[ 11.696000] cloud-init[1284]: The key fingerprint is:
[ 11.696000] cloud-init[1284]:
SHA256:0x6ut/UjYY0rM04SL9GP0+/torEQ9nIhXKtxOFdtUXU root@ubuntu
[ 11.696000] cloud-init[1284]: The key's randomart image is:
[ 11.696000] cloud-init[1284]: +---[DSA 1024]----+
[ 11.696000] cloud-init[1284]: | .E|
[ 11.696000] cloud-init[1284]: | .o|
[ 11.696000] cloud-init[1284]: | . . o|
[ 11.696000] cloud-init[1284]: | + o o . |
[ 11.696000] cloud-init[1284]: | S % =o |
[ 11.696000] cloud-init[1284]: | O #+.. |
[ 11.696000] cloud-init[1284]: | o @.Bo |
[ 11.696000] cloud-init[1284]: | ==*o=o. |
[ 11.696000] cloud-init[1284]: | .oo=o+++o|
[ 11.696000] cloud-init[1284]: +----[SHA256]-----+
[ 11.696000] cloud-init[1284]: Generating public/private ecdsa key pair.
[ 11.696000] cloud-init[1284]: Your identification has been saved in
/etc/ssh/ssh_host_ecdsa_key
[ 11.700000] cloud-init[1284]: Your public key has been saved in
/etc/ssh/ssh_host_ecdsa_key.pub
[ 11.700000] cloud-init[1284]: The key fingerprint is:
[ 11.704000] cloud-init[1284]:
SHA256:jRuJK1jsIBiXMcAM7XIVwsuhCue5jZSYVpFhmIm0Vww root@ubuntu
[ 11.704000] cloud-init[1284]: The key's randomart image is:
[ 11.704000] cloud-init[1284]: +---[ECDSA 256]---+
[ 11.704000] cloud-init[1284]: |O=BE*o |
[ 11.704000] cloud-init[1284]: |.**Bo. |
[ 11.704000] cloud-init[1284]: |.=o=. |
[ 11.704000] cloud-init[1284]: |=oBo . + |
[ 11.704000] cloud-init[1284]: |=Booo . S . |
[ 11.704000] cloud-init[1284]: |+o== . o |
[ 11.704000] cloud-init[1284]: |...+o . . |
[ 11.704000] cloud-init[1284]: | o .. |
[ 11.704000] cloud-init[1284]: | |
[ 11.704000] cloud-init[1284]: +----[SHA256]-----+
[ 11.704000] cloud-init[1284]: Generating public/private ed25519 key pair.
[ 11.704000] cloud-init[1284]: Your identification has been saved in
/etc/ssh/ssh_host_ed25519_key
[ 11.704000] cloud-init[1284]: Your public key has been saved in
/etc/ssh/ssh_host_ed25519_key.pub
[ 11.704000] cloud-init[1284]: The key fingerprint is:
[ 11.704000] cloud-init[1284]:
SHA256:IhP8bJMuRcln1tXoh14HrQD9WHvCUgSDYahAvOygj4U root@ubuntu
[ 11.704000] cloud-init[1284]: The key's randomart image is:
[ 11.704000] cloud-init[1284]: +--[ED25519 256]--+
[ 11.704000] cloud-init[1284]: | o. .+=+=.. |
[ 11.704000] cloud-init[1284]: | .o. ..o..+.= .|
[ 11.704000] cloud-init[1284]: | .oo+.+ .. O + |
[ 11.704000] cloud-init[1284]: | . o=.= = O o|
[ 11.704000] cloud-init[1284]: | o oo O S . + + |
[ 11.704000] cloud-init[1284]: |E . .* o . |
[ 11.704000] cloud-init[1284]: | + . . |
[ 11.704000] cloud-init[1284]: |. . . |
[ 11.704000] cloud-init[1284]: | |
[ 11.704000] cloud-init[1284]: +----[SHA256]-----+
[ OK ] Finished Initial cloud-ini…ob (metadata service crawler).
[ OK ] Reached target Cloud-config availability.
[ OK ] Reached target Network is Online.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Refresh fwupd metadata regularly.
[ OK ] Started Daily rotation of log files.
[ OK ] Started Daily man-db regeneration.
[ OK ] Started Message of the Day.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Paths.
[ OK ] Reached target Timers.
[ OK ] Listening on cloud-init hotplug hook socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on Open-iSCSI iscsid Socket.
Starting Socket activation for snappy daemon.
[ OK ] Listening on UUID daemon activation socket.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
Starting Availability of block devices...
[ OK ] Listening on Socket activation for snappy daemon.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Accounts Service...
Starting LSB: automatic crash report generation...
Starting Deferred execution scheduler...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started D-Bus System Message Bus.
[ OK ] Started Save initial kernel messages after boot.
Starting Remove Stale Onli…t4 Metadata Check Snapshots...
Starting Record successful boot for GRUB...
[ OK ] Started irqbalance daemon.
Starting Message of the Day...
Starting Dispatcher daemon for systemd-networkd...
[ OK ] Started Set the CPU Frequency Scaling governor.
Starting Authorization Manager...
Starting System Logging Service...
[ OK ] Reached target Login Prompts (Pre).
Starting Snap Daemon...
Starting OpenBSD Secure Shell server...
Starting Login Service...
Starting Permit User Sessions...
Starting Disk Manager...
[ OK ] Finished Availability of block devices.
[ OK ] Started Deferred execution scheduler.
[ OK ] Finished Permit User Sessions.
Starting Hold until boot process finishes up...
Starting Terminate Plymouth Boot Screen...
[ OK ] Finished Hold until boot process finishes up.
[ OK ] Started Serial Getty on ttyAMA0.
Starting Set console scheme...
[ OK ] Finished Set console scheme.
[ OK ] Created slice system-getty.slice.
[ OK ] Started Getty on tty1.
[ OK ] Reached target Login Prompts.
[ OK ] Finished Terminate Plymouth Boot Screen.
[ OK ] Started System Logging Service.
[ OK ] Finished Record successful boot for GRUB.
Starting GRUB failed boot detection...
[ OK ] Finished GRUB failed boot detection.
[ OK ] Started LSB: automatic crash report generation.
[ OK ] Started Login Service.
[ OK ] Started Unattended Upgrades Shutdown.
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Started Authorization Manager.
Starting Modem Manager...
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[ OK ] Started Accounts Service.
[ OK ] Started Modem Manager.
[ OK ] Started Disk Manager.
[ OK ] Started Dispatcher daemon for systemd-networkd.
[ OK ] Started Snap Daemon.
Starting Wait until snapd is fully seeded...
Starting Time & Date Service...
[ OK ] Started Time & Date Service.
[ OK ] Finished Wait until snapd is fully seeded.
Starting Apply the settings specified in cloud-config...
[ OK ] Finished Message of the Day.
[ 16.124000] cloud-init[1814]: Cloud-init v. 23.3.3-0ubuntu0~20.04.1
running 'modules:config' at Fri, 22 Dec 2023 04:46:12 +0000. Up 15.53
seconds.
[ OK ] Finished Apply the settings specified in cloud-config.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Execute cloud user/final scripts...
Starting Update UTMP about System Runlevel Changes...
[ OK ] Finished Update UTMP about System Runlevel Changes.
ci-info: no authorized SSH keys fingerprints found for user ubuntu.
<14>Dec 22 04:46:14 cloud-init:
#############################################################
<14>Dec 22 04:46:14 cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
<14>Dec 22 04:46:14 cloud-init: 1024
SHA256:0x6ut/UjYY0rM04SL9GP0+/torEQ9nIhXKtxOFdtUXU root@ubuntu (DSA)
<14>Dec 22 04:46:14 cloud-init: 256
SHA256:jRuJK1jsIBiXMcAM7XIVwsuhCue5jZSYVpFhmIm0Vww root@ubuntu (ECDSA)
<14>Dec 22 04:46:14 cloud-init: 256
SHA256:IhP8bJMuRcln1tXoh14HrQD9WHvCUgSDYahAvOygj4U root@ubuntu (ED25519)
<14>Dec 22 04:46:14 cloud-init: 3072
SHA256:bZN2k5EYxjCAfED10rWBDTlppDPVhca8Vy936If9hzk root@ubuntu (RSA)
<14>Dec 22 04:46:14 cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
<14>Dec 22 04:46:14 cloud-init:
#############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256
AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBMuIQo52hX4hqHFAXY9Ai2t+x3m7A9JNTX+HzBIoGQfM9KL/F/NTgzhwSXWu1wXdI5HvyEmhBi7OEiAzEt6h8ss=
root@ubuntu
ssh-ed25519
AAAAC3NzaC1lZDI1NTE5AAAAIBHI/7FjbnNgDT23jepUArnCeB1TWWHIKK78jNAcCwuq
root@ubuntu
ssh-rsa
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
root@ubuntu
-----END SSH HOST KEY KEYS-----
[ 17.384000] cloud-init[1849]: Cloud-init v. 23.3.3-0ubuntu0~20.04.1
running 'modules:final' at Fri, 22 Dec 2023 04:46:13 +0000. Up 17.05
seconds.
[ 17.384000] cloud-init[1849]: Cloud-init v. 23.3.3-0ubuntu0~20.04.1
finished at Fri, 22 Dec 2023 04:46:14 +0000. Datasource DataSourceNone. Up
17.37 seconds
[ 17.384000] cloud-init[1849]: 2023-12-22 04:46:14,222 -
cc_final_message.py[WARNING]: Used fallback datasource
Ubuntu 20.04.6 LTS ubuntu ttyAMA0
ubuntu login: ubuntu
Password:
Login incorrect
ubuntu login: ubuntu
Password:
Login incorrect
ubuntu login:
_______________________________________________
gem5-users mailing list -- gem5-users@gem5.org
To unsubscribe send an email to gem5-users-le...@gem5.org
