Hi Xing,
I know what is causing the issue, and I’ll make sure it is fixed. As the patch
is under review, the best way to feedback on the patch is through the review
board (something to consider in the future).
Thanks,
Andreas
From: Xing Niu <[email protected]<mailto:[email protected]>>
Reply-To: gem5 users mailing list
<[email protected]<mailto:[email protected]>>
Date: Sunday, 1 December 2013 08:00
To: gem5 users mailing list <[email protected]<mailto:[email protected]>>
Subject: [gem5-users] --mem-type=dramsim2 and checkpoint-restore=1 error
(gem5+dramsim2)
Hi all,
I use --take-checkpoint to create the checkpoint and when I use
checkpoint-restore=1 to re-run it, it works well. But my gem5 is integrated
with the Dramsim2, so if I add the --mem-type=dramsim2 option with
checkpoint-restore=1 option together, I got the following error.
Anyone can give some advice?
Listening for system connection on port 3456
0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000
0: system.remote_gdb.listener: listening for remote gdb #1 on port 7001
0: system.remote_gdb.listener: listening for remote gdb #2 on port 7002
0: system.remote_gdb.listener: listening for remote gdb #3 on port 7003
0: system.remote_gdb.listener: listening for remote gdb #4 on port 7004
0: system.remote_gdb.listener: listening for remote gdb #5 on port 7005
0: system.remote_gdb.listener: listening for remote gdb #6 on port 7006
0: system.remote_gdb.listener: listening for remote gdb #7 on port 7007
0: system.remote_gdb.listener: listening for remote gdb #8 on port 7008
0: system.remote_gdb.listener: listening for remote gdb #9 on port 7009
0: system.remote_gdb.listener: listening for remote gdb #10 on port 7010
0: system.remote_gdb.listener: listening for remote gdb #11 on port 7011
0: system.remote_gdb.listener: listening for remote gdb #12 on port 7012
0: system.remote_gdb.listener: listening for remote gdb #13 on port 7013
0: system.remote_gdb.listener: listening for remote gdb #14 on port 7014
0: system.remote_gdb.listener: listening for remote gdb #15 on port 7015
Switch at curTick count:10000
info: Entering event queue @ 10000. Starting simulation...
writing vis file to
ext/dramsim2/DRAMSim2//results//DDR3_micron_32M_8B_x8_sg15/2
GB.1Ch.1R.scheme2.open_page.32TQ.32CQ.RtB.pRank.vis
Switched CPUS @ tick 20000
switching cpus
**** REAL SIMULATION ****
info: Entering event queue @ 20000. Starting simulation...
m5.opt: build/ALPHA/mem/dramsim2.cc:291: void DRAMSim2::readComplete(unsigned
in
t, uint64_t, uint64_t): Assertion `cycle == divCeil(curTick(),
wrapper.clockPeri
od() * SimClock::Int::ns)' failed.
Program aborted at cycle 134500
thanks,
Xing
-- IMPORTANT NOTICE: The contents of this email and any attachments are
confidential and may also be privileged. If you are not the intended recipient,
please notify the sender immediately and do not disclose the contents to any
other person, use it for any purpose, or store or copy the information in any
medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered
in England & Wales, Company No: 2557590
ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ,
Registered in England & Wales, Company No: 2548782_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
