Hi, Do the cores execute the same code?
-- Fernando A. Endo, PhD student and researcher CEA Lab and Université de Grenoble, UJF France 2012/11/4 shervin hajiamini <hajamini_2...@yahoo.com> > Hi Ali, > > > Thank you very much for further direction. I am able to have the stats > dumped every period with respect to the start and the end ticks. > > > I have inputted stats (for a period) into McPat tool to get the power > consumption for each core (out of 64 simulated cores). Based on the output > of McPat, I have found that some cores have more power consumption (around > of 3 to 4 watts) comparing to other cores which have power consumption of > less than 1 watt. I do not know why some cores consume more energy because > normally all the cores should have a similar power consumption. > > > As McPat does not have a support team to ask questions, I would appreciate > if you could give me a guidance about the reason for getting the high power > numbers. > > > Thanks, > > Shervin > > --------------------------------------------------------------------- > > > the second simulate should be end_tick_ROI - start_tick_ROI. You pass a > relative time to the function, not an absolute time. > > Thanks, > > Ali > > On Oct 27, 2012, at 11:29 PM, shervin hajiamini wrote: > > > Hi Ali, Andreas, > > > > > > > > I have tested dumping periodic stats for only ROI by putting the > following statements in simulation.py: > > > > > > > > M5.simulate(start_tick_ROI) > > statDump(4000000000) > > exit_event = m5.simulate(end_tick_ROI) > > > > The stats get dumped (every period) starting from start_tick_ROI, but it > does NOT stop at end_tick_ROI. > > > > Please let me know how I can make sure that the simulation stops at > end_tick_ROI. I am interested in having stats for only ROI. > > > > Thanks, > > Shervin > > > > ------------------------------------------------------ > > > > Hi Shervin, > > > > If you are not interested in what happens after a specific tick T, then > only run to that tick and exit. > > > > Andreas > > --------------------------------------- > > > > Hello Ali, > > > > I would appreciate in you could answer my question (email below) about > dumping stats for ROI using simulation.py. > > > > Following your direction, I have run the simulation with stats dumped > every period, however I want to have the period dumping stopped at a > particular tick (end of ROI). Could you please let me know how I can > specify that in simulation.py? > > > > Regards, > > Shervin > > > > --------------------------------------------------- > > Hi Ali, > > > > Thank you very much for your direction. If I have understood it > correctly, "ticks_till_ROI" indicates the TICK when ROI starts? How can I > specify when (at which tick) ROI ends? Shall I specify that with m5.MaxTick? > > > > Could you please tell me where exactly (in simulation.py) I should put > the statements you said? Shall I put it in after ***Real Simulation***? > > > > Thanks, > > Shervin > > ------------------------------------------------------------------------ > > > > Hi Shervin, > > > > You can modify Simulation.py to run for however many ticks you need an > then return control to python: > > m5.simulate(ticks_till_ROI) > > statDump(1000000000) > > m5.simulate(m5.MaxTick) > > > > > > Ali > > > > ******************************** > > _______________________________________________ > > gem5-users mailing list > > gem5-users@gem5.org <http://mc/compose?to=gem5-users@gem5.org> > > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://m5sim.org/cgi-bin/mailman/private/gem5-users/attachments/20121028/a6f3c198/attachment-0001.html > > > > ------------------------------ > > > _______________________________________________ > gem5-users mailing list > gem5-users@gem5.org <http://mc/compose?to=gem5-users@gem5.org> > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > > End of gem5-users Digest, Vol 75, Issue 121 > ******************************************* > > > _______________________________________________ > gem5-users mailing list > gem5-users@gem5.org > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users >
_______________________________________________ gem5-users mailing list gem5-users@gem5.org http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
