It will take around 1.5 hours for android to boot completely and that number is probably closer to 4 or 5 hours if you're running the debug binary which you appear to being doing.
Ali On Oct 13, 2012, at 3:40 AM, manish jain wrote: > Hi, > While running Android GingerBread simulation, my simulation is not able to > proceed after a particular point. I am using M5 terminal for seeing the > output. The following messages are appearing on the M5 terminal: > > VFS: Mounted root (ext2 filesystem) on device 8:1. > [ 2.254015] VFS: Mounted root (ext2 filesystem) on device 8:1. > <6>Freeing init memory: 148K > [ 2.254029] Freeing init memory: 148K > <3>init: cannot open '/initlogo.rle' > [ 2.268521] init: cannot open '/initlogo.rle' > <3>init: cannot find '/system/etc/install-recovery.sh', disabling > 'flash_recovery' > [ 2.277404] init: cannot find '/system/etc/install-recovery.sh', disabling > 'flash_recovery' > sh: can't access tty; job control turned off > > And below is the output on termianl from where I gave command to boot Android > Image: > > manish@ubuntu:~/gem5-stable/system/disks$ build/ARM/m5.debug > configs/example/fs.py -b bbench-gb --kernel=vmlinux.smp.mouse.arm > --frame-capture > bash: build/ARM/m5.debug: No such file or directory > manish@ubuntu:~/gem5-stable/system/disks$ cd ../.. > manish@ubuntu:~/gem5-stable$ build/ARM/m5.debug configs/example/fs.py -b > bbench-gb --kernel=vmlinux.smp.mouse.arm --frame-capture > gem5 Simulator System. http://gem5.org > gem5 is copyrighted software; use the --copyright option for details. > > gem5 compiled Oct 9 2012 02:28:51 > gem5 started Oct 13 2012 02:46:36 > gem5 executing on ubuntu > command line: build/ARM/m5.debug configs/example/fs.py -b bbench-gb > --kernel=vmlinux.smp.mouse.arm --frame-capture > Global frequency set at 1000000000000 ticks per second > info: kernel located at: > /home/manish/gem5-stable/system/binaries/vmlinux.smp.mouse.arm > Listening for system connection on port 5900 > Listening for system connection on port 3456 > 0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000 > info: Using bootloader at address 0x80000000 > **** REAL SIMULATION **** > info: Entering event queue @ 0. Starting simulation... > warn: The clidr register always reports 0 caches. > warn: clidr LoUIS field of 0b001 to match current ARM implementations. > warn: The csselr register isn't implemented. > 305035000: system.terminal: attach terminal 0 > warn: instruction 'mcr bpiallis' unimplemented > warn: instruction 'mcr icialluis' unimplemented > warn: The ccsidr register isn't implemented and always reads as 0. > warn: instruction 'mcr dccimvac' unimplemented > warn: instruction 'mcr dccmvau' unimplemented > warn: instruction 'mcr icimvau' unimplemented > warn: instruction 'mcr bpiallis' unimplemented > warn: LCD dual screen mode not supported > warn: instruction 'mcr bpiallis' unimplemented > warn: instruction 'mcr icialluis' unimplemented > warn: instruction 'mcr bpiallis' unimplemented > > Does anybody has some idea about itor someone has experienced it before? > > Thanks > Manish > _______________________________________________ > gem5-users mailing list > gem5-users@gem5.org > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
_______________________________________________ gem5-users mailing list gem5-users@gem5.org http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
