Hi Eng.Gabe, As i mentioned before i can't run gem5ing.py on mac os ,so i am really blocked.
I am still confused what should i do to configure the whole disk image on Mac OS? I need hints or advices . For example : Can i use Mac commands to set up the disk image ?! Thank you in advance for your time and support. Best Regards Wael Amr On Tue, May 15, 2012 at 2:44 PM, Gabe Black <[email protected]> wrote: > That's not a file system image, it's a whole disk image including a > partition table at the start. You'll need to skip over the beginning to get > to the start of the file system. You can refer to gem5img.py to see how > it's done on Linux. > > Gabe > > > On 05/14/12 21:52, wael Amr wrote: > > Hi All, > > After building gem5 based on ISA x86,i started to follow steps for disk > image (http://www.m5sim.org/Disk_images) as i need full system. > As i mentioned before ( > http://www.mail-archive.com/[email protected]/msg03673.html) , > i observed that Mac's do not have loop devices and losetup program. > > But i found another command to mount the image : hdiutil > So tried to use it as shown: > hdiutil mount linux-x86.img > > But i got this message : > hdiutil: mount failed - no mountable file systems > > Please any advice/hint will be highly appreciated to solve this problem > or set up disk image on Mac OS in general as i am blocked. > > Thank you so much for time and support. > Best Regards > Wael Amr > > > > > > _______________________________________________ > gem5-users mailing > [email protected]http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > > > > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users >
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
