Hi I have multi-page schematics with a number of off-page connectors (realised using the symbols input-1.sym and input-2.sym) as described in the howto: [1]http://www.geda.seul.org/wiki/geda:na_howto#what_is_the_net_attribut e_used_for I noticed that if multiple net attributes happen to be present on the same net in the schematic, then the netlist seems to treat them as completely different nets and /ignores/ any interconnections. I have posted my files here: <[2]http://www.cedt.iisc.ernet.in/people/students/kabhijit/files/gEDA/> There are two pages of schematics. I have defined two 'net' attributes - one is MVDD and the other is NVDD. In addition these two are shorted. Therefore _all_ the pins in the schematic are connected to a single net. But the netlist has a listing as if there is no connection between MVDD and NVDD. I expected gnetlist to replace MVDD by NVDD, or at least flag a warning that there is something unexpected. Am I missing something here? Thanks in advance, Regards, Abhijit Kshirsagar PhD Student, Power Electronics Group, CEDT, Indian Institute of Science, Bangalore
References 1. http://www.geda.seul.org/wiki/geda:na_howto#what_is_the_net_attribute_used_for 2. http://www.cedt.iisc.ernet.in/people/students/kabhijit/files/gEDA/
_______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
