On Thu, 2010-12-23 at 04:50 -0800, [email protected] wrote: > The coordinate system that is used in the *.fp files does not make > sense to me. I tried converting a pad 47 mil by 27 mil into what is > used in the actual file, but I can't make it come out correctly. I was > using a sample SOD-123 pad and converting it to mils, but what I come > up with does not make any sense. Anyone have any insights on what I > might be doing wrong. I am using the new style with "[" which is 1/100 > of mil. > Z.K.
Also, if you want, you can postfix with a unit.. something like 1 mm or such. I'm guessing that you might be being tripped by offsets at the end of pads? __________________________ | | | + + | |__________________________| If + are the end coordinates, you still have extension beyond that due to the thickness of the line. Just a guess. -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) Tel: +44 (0)1223 748328 - (Shared lab phone, ask for me) _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
