Hi
Here is an updated version.
Changelog:
* gcc.dg/builtin-apply2.c: skip test on arm hardfloat ABI targets
* gcc.dg/tls/pr42894.c: Remove options, forcing -mthumb fails
with hardfloat, and test is not thumb-specific
* gcc,target/arm/thumb-ltu.c: Avoid test failure with
hardfloat ABI by requiring arm_thumb1_ok
* lib/target-supports.exp
(check_effective_target_arm_fp16_ok_nocache): don't force
-mfloat-abi=soft when building for hardfloat target
On 19 August 2013 16:34, Richard Earnshaw <rearn...@arm.com> wrote:
> On 15/08/13 15:10, Charles Baylis wrote:
>> Hi
>>
>> The attached patch fixes some tests which fail when testing gcc for a
>> arm-none-linux-gnueabihf target because they do not expect to be built
>> with a hard float ABI.
>>
>> The change in target-supports.exp fixes arm-fp16-ops-5.c and
>> arm-fp16-ops-6.c.
>>
>> Tested on arm-none-linux-gnueabihf using qemu-arm, and does not cause
>> any other tests to break.
>>
>> Comments? This is my first patch, so please point out anything wrong.
>>
>>
>
>>
>>
>> 2013-08-15 Charles Baylis <charles.bay...@linaro.org>
>>
>> * gcc.dg/builtin-apply2.c: skip test on arm hardfloat ABI targets
>> * gcc.dg/tls/pr42894.c: Use -mfloat-abi=soft as Thumb1 does
>> not support hardfloat ABI
>> * arm/thumb-ltu.c: Use -mfloat-abi=soft as Thumb1 does not
>> support hardfloat ABI
>> * target-supports.exp: don't force -mfloat-abi=soft when
>> building for hardfloat target
>>
>>
>> hf-fixes.txt
>>
>>
>> Index: gcc/testsuite/gcc.dg/builtin-apply2.c
>> ===================================================================
>> --- gcc/testsuite/gcc.dg/builtin-apply2.c (revision 201726)
>> +++ gcc/testsuite/gcc.dg/builtin-apply2.c (working copy)
>> @@ -1,6 +1,7 @@
>> /* { dg-do run } */
>> /* { dg-skip-if "Variadic funcs have all args on stack. Normal funcs have
>> args in registers." { "aarch64*-*-* avr-*-* " } { "*" } { "" } } */
>> /* { dg-skip-if "Variadic funcs use Base AAPCS. Normal funcs use VFP
>> variant." { "arm*-*-*" } { "-mfloat-abi=hard" } { "" } } */
>> +/* { dg-skip-if "Variadic funcs use Base AAPCS. Normal funcs use VFP
>> variant." { "arm*-*-gnueabihf" } { "*" } { "-mfloat-abi=soft*" } } */
>>
>
>
> As you've noticed, basing the test's behaviour on the config variant
> doesn't work reliably. The builtin-apply2 test really should be skipped
> if the current test variant is not soft-float. We already have
> check_effective_target_arm_hf_eabi in target-supports.exp that checks
> whether __ARM_PCS_VFP is defined during a compilation. So can replace
> both arm related lines in builtin-apply2 with
>
> /* { dg-skip-if "Variadic funcs use Base AAPCS. Normal funcs use VFP
> variant." { "arm*-*-*" && arm_hf_eabi} { "*" } { "" } } */
>
>> /* PR target/12503 */
>> /* Origin: <pierre.nguyen-tu...@asim.lip6.fr> */
>> Index: gcc/testsuite/gcc.dg/tls/pr42894.c
>> ===================================================================
>> --- gcc/testsuite/gcc.dg/tls/pr42894.c (revision 201726)
>> +++ gcc/testsuite/gcc.dg/tls/pr42894.c (working copy)
>> @@ -1,6 +1,7 @@
>> /* PR target/42894 */
>> /* { dg-do compile } */
>> /* { dg-options "-march=armv5te -mthumb" { target arm*-*-* } } */
>> +/* { dg-options "-march=armv5te -mthumb -mfloat-abi=soft" { target
>> arm*-*-*hf } } */
>> /* { dg-require-effective-target tls } */
>>
>
> Although the original PR was for Thumb1, this is a generic test. I'm
> not convinced that on ARM it should try to force thumb1. Removing the
> original dg-options line should solve the problem and we then get better
> multi-lib testing as well.
>
>> extern __thread int t;
>> Index: gcc/testsuite/gcc.target/arm/thumb-ltu.c
>> ===================================================================
>> --- gcc/testsuite/gcc.target/arm/thumb-ltu.c (revision 201726)
>> +++ gcc/testsuite/gcc.target/arm/thumb-ltu.c (working copy)
>> @@ -1,6 +1,6 @@
>> /* { dg-do compile } */
>> /* { dg-skip-if "incompatible options" { arm*-*-* } { "-march=*" } {
>> "-march=armv6" "-march=armv6j" "-march=armv6z" } } */
>> -/* { dg-options "-mcpu=arm1136jf-s -mthumb -O2" } */
>> +/* { dg-options "-mcpu=arm1136jf-s -mthumb -O2 -mfloat-abi=soft" } */
>>
>
> This won't work if there's an explict -mfloat-abi={softfp,hard} on the
> multilib options. Probably the best thing to do here is to skip the
> test if arm_thumb1_ok is not true.
>
>> void f(unsigned a, unsigned b, unsigned c, unsigned d)
>> {
>> Index: gcc/testsuite/lib/target-supports.exp
>> ===================================================================
>> --- gcc/testsuite/lib/target-supports.exp (revision 201726)
>> +++ gcc/testsuite/lib/target-supports.exp (working copy)
>> @@ -2445,6 +2445,11 @@
>> # Must generate floating-point instructions.
>> return 0
>> }
>> + if [check-flags [list "" { *-*-gnueabihf } { "*" } { "" } ]] {
>> + # Use existing float-abi and force an fpu which supports fp16
>
> This should use arm_hf_eabi as described above.
>
>> + set et_arm_fp16_flags "-mfpu=vfpv4"
>> + return 1;
>> + }
>> if [check-flags [list "" { *-*-* } { "-mfpu=*" } { "" } ]] {
>> # The existing -mfpu value is OK; use it, but add softfp.
>> set et_arm_fp16_flags "-mfloat-abi=softfp"
>>
>
> Kyrill's comments re ChangeLogs also apply.
>
> R.
>
Index: gcc/testsuite/gcc.dg/builtin-apply2.c
===================================================================
--- gcc/testsuite/gcc.dg/builtin-apply2.c (revision 202747)
+++ gcc/testsuite/gcc.dg/builtin-apply2.c (working copy)
@@ -1,6 +1,6 @@
/* { dg-do run } */
/* { dg-skip-if "Variadic funcs have all args on stack. Normal funcs have args
in registers." { "aarch64*-*-* avr-*-* " } { "*" } { "" } } */
-/* { dg-skip-if "Variadic funcs use Base AAPCS. Normal funcs use VFP
variant." { "arm*-*-*" } { "-mfloat-abi=hard" } { "" } } */
+/* { dg-skip-if "Variadic funcs use Base AAPCS. Normal funcs use VFP
variant." { arm*-*-* && arm_hf_eabi } { "*" } { "" } } */
/* PR target/12503 */
/* Origin: <pierre.nguyen-tu...@asim.lip6.fr> */
Index: gcc/testsuite/gcc.dg/tls/pr42894.c
===================================================================
--- gcc/testsuite/gcc.dg/tls/pr42894.c (revision 202747)
+++ gcc/testsuite/gcc.dg/tls/pr42894.c (working copy)
@@ -1,6 +1,5 @@
/* PR target/42894 */
/* { dg-do compile } */
-/* { dg-options "-march=armv5te -mthumb" { target arm*-*-* } } */
/* { dg-require-effective-target tls } */
extern __thread int t;
Index: gcc/testsuite/gcc.target/arm/thumb-ltu.c
===================================================================
--- gcc/testsuite/gcc.target/arm/thumb-ltu.c (revision 202747)
+++ gcc/testsuite/gcc.target/arm/thumb-ltu.c (working copy)
@@ -1,5 +1,5 @@
/* { dg-do compile } */
-/* { dg-skip-if "incompatible options" { arm*-*-* } { "-march=*" } {
"-march=armv6" "-march=armv6j" "-march=armv6z" } } */
+/* { dg-require-effective-target arm_thumb1_ok } */
/* { dg-options "-mcpu=arm1136jf-s -mthumb -O2" } */
void f(unsigned a, unsigned b, unsigned c, unsigned d)
Index: gcc/testsuite/lib/target-supports.exp
===================================================================
--- gcc/testsuite/lib/target-supports.exp (revision 202747)
+++ gcc/testsuite/lib/target-supports.exp (working copy)
@@ -2467,6 +2467,11 @@
# Must generate floating-point instructions.
return 0
}
+ if [check_effective_target_arm_hf_eabi] {
+ # Use existing float-abi and force an fpu which supports fp16
+ set et_arm_fp16_flags "-mfpu=vfpv4"
+ return 1;
+ }
if [check-flags [list "" { *-*-* } { "-mfpu=*" } { "" } ]] {
# The existing -mfpu value is OK; use it, but add softfp.
set et_arm_fp16_flags "-mfloat-abi=softfp"
