The optimization example is as follows.
From:
if (condition)
dest += 1 << 16;
To:
dest += (condition ? 1 : 0) << 16;
It does not use maskeqz and masknez, thus reducing the number of
instructions.
gcc/ChangeLog:
* config/loongarch/loongarch.cc
(loongarch_expand_conditional_move): Add some optimization
implementations based on noce_try_cmove_arith.
gcc/testsuite/ChangeLog:
* gcc.target/loongarch/conditional-move-opt-1.c: New test.
* gcc.target/loongarch/conditional-move-opt-2.c: New test.
---
gcc/config/loongarch/loongarch.cc | 103 +++++++++++++++++-
.../loongarch/conditional-move-opt-1.c | 58 ++++++++++
.../loongarch/conditional-move-opt-2.c | 42 +++++++
3 files changed, 202 insertions(+), 1 deletion(-)
create mode 100644 gcc/testsuite/gcc.target/loongarch/conditional-move-opt-1.c
create mode 100644 gcc/testsuite/gcc.target/loongarch/conditional-move-opt-2.c
diff --git a/gcc/config/loongarch/loongarch.cc
b/gcc/config/loongarch/loongarch.cc
index 2d4290bc2d1..32fd1697813 100644
--- a/gcc/config/loongarch/loongarch.cc
+++ b/gcc/config/loongarch/loongarch.cc
@@ -5294,6 +5294,81 @@ loongarch_expand_conditional_move (rtx *operands)
loongarch_emit_float_compare (&code, &op0, &op1);
else
{
+ /* Optimize to reduce the number of instructions for ternary operations.
+ Mainly implemented based on noce_try_cmove_arith.
+ For dest = (condition) ? value_if_true : value_if_false;
+ the optimization requires:
+ a. value_if_false = var;
+ b. value_if_true = var OP C (a positive integer power of 2).
+
+ Situations similar to the following:
+ if (condition)
+ dest += 1 << imm;
+ to:
+ dest += (condition ? 1 : 0) << imm; */
+
+ rtx_insn *insn;
+ HOST_WIDE_INT val = 0; /* The value of rtx C. */
+ /* INSN with operands[2] as the output. */
+ rtx_insn *value_if_true_insn = NULL;
+ /* INSN with operands[3] as the output. */
+ rtx_insn *value_if_false_insn = NULL;
+ rtx value_if_true_insn_src = NULL_RTX;
+ /* Common operand var in value_if_true and value_if_false. */
+ rtx comm_var = NULL_RTX;
+ bool can_be_optimized = false;
+
+ /* Search value_if_true_insn and value_if_false_insn. */
+ struct sequence_stack *seq = get_current_sequence ()->next;
+ for (insn = seq->last; insn; insn = PREV_INSN (insn))
+ {
+ if (single_set (insn))
+ {
+ rtx set_dest = SET_DEST (single_set (insn));
+ if (rtx_equal_p (set_dest, operands[2]))
+ value_if_true_insn = insn;
+ else if (rtx_equal_p (set_dest, operands[3]))
+ value_if_false_insn = insn;
+ if (value_if_true_insn && value_if_false_insn)
+ break;
+ }
+ }
+
+ /* Check if the optimization conditions are met. */
+ if (value_if_true_insn
+ && value_if_false_insn
+ /* Make sure that value_if_false and var are the same. */
+ && BINARY_P (value_if_true_insn_src
+ = SET_SRC (single_set (value_if_true_insn)))
+ /* Make sure that both value_if_true and value_if_false
+ has the same var. */
+ && rtx_equal_p (XEXP (value_if_true_insn_src, 0),
+ SET_SRC (single_set (value_if_false_insn))))
+ {
+ comm_var = SET_SRC (single_set (value_if_false_insn));
+ rtx src = XEXP (value_if_true_insn_src, 1);
+ rtx imm = NULL_RTX;
+ if (CONST_INT_P (src))
+ imm = src;
+ else
+ for (insn = seq->last; insn; insn = PREV_INSN (insn))
+ {
+ rtx set = single_set (insn);
+ if (set && rtx_equal_p (SET_DEST (set), src))
+ {
+ imm = SET_SRC (set);
+ break;
+ }
+ }
+ if (imm && CONST_INT_P (imm))
+ {
+ val = INTVAL (imm);
+ /* Make sure that imm is a positive integer power of 2. */
+ if (val > 0 && !(val & (val - 1)))
+ can_be_optimized = true;
+ }
+ }
+
if (GET_MODE_SIZE (GET_MODE (op0)) < UNITS_PER_WORD)
{
promote_op[0] = (REG_P (op0) && REG_P (operands[2]) &&
@@ -5314,22 +5389,48 @@ loongarch_expand_conditional_move (rtx *operands)
op0_extend = op0;
op1_extend = force_reg (word_mode, op1);
+ rtx target = gen_reg_rtx (GET_MODE (op0));
+
if (code == EQ || code == NE)
{
op0 = loongarch_zero_if_equal (op0, op1);
op1 = const0_rtx;
+ /* For EQ, set target to 1 if op0 and op1 are the same,
+ otherwise set to 0.
+ For NE, set target to 0 if op0 and op1 are the same,
+ otherwise set to 1. */
+ if (can_be_optimized)
+ loongarch_emit_binary (code, target, op0, const0_rtx);
}
else
{
/* The comparison needs a separate scc instruction. Store the
result of the scc in *OP0 and compare it against zero. */
bool invert = false;
- rtx target = gen_reg_rtx (GET_MODE (op0));
loongarch_emit_int_order_test (code, &invert, target, op0, op1);
+ if (can_be_optimized && invert)
+ loongarch_emit_binary (EQ, target, target, const0_rtx);
code = invert ? EQ : NE;
op0 = target;
op1 = const0_rtx;
}
+
+ if (can_be_optimized)
+ {
+ /* Perform (condition ? 1 : 0) << log2 (C). */
+ loongarch_emit_binary (ASHIFT, target, target,
+ GEN_INT (exact_log2 (val)));
+ /* Shift-related insn patterns only support SImode operands[2]. */
+ enum rtx_code opcode = GET_CODE (value_if_true_insn_src);
+ if (opcode == ASHIFT || opcode == ASHIFTRT || opcode == LSHIFTRT
+ || opcode == ROTATE || opcode == ROTATERT)
+ target = gen_lowpart (SImode, target);
+ /* Perform target = target OP ((condition ? 1 : 0) << log2 (C)). */
+ loongarch_emit_binary (opcode, operands[0],
+ force_reg (GET_MODE (operands[3]), comm_var),
+ target);
+ return;
+ }
}
rtx cond = gen_rtx_fmt_ee (code, GET_MODE (op0), op0, op1);
diff --git a/gcc/testsuite/gcc.target/loongarch/conditional-move-opt-1.c
b/gcc/testsuite/gcc.target/loongarch/conditional-move-opt-1.c
new file mode 100644
index 00000000000..ed13471aa90
--- /dev/null
+++ b/gcc/testsuite/gcc.target/loongarch/conditional-move-opt-1.c
@@ -0,0 +1,58 @@
+/* { dg-do compile } */
+/* { dg-options "-O2" } */
+/* { dg-final { scan-assembler-not "maskeqz" } } */
+/* { dg-final { scan-assembler-not "masknez" } } */
+
+extern long lm, ln, lr;
+
+void
+test_ne ()
+{
+ if (lm != ln)
+ lr += (1 << 16);
+ lr += lm;
+}
+
+void
+test_eq ()
+{
+ if (lm == ln)
+ lr = lm + (1 << 16);
+ else
+ lr = lm;
+ lr += lm;
+}
+
+void
+test_lt ()
+{
+ if (lm < ln)
+ lr *= (1 << 16);
+ lr += lm;
+}
+
+void
+test_le ()
+{
+ if (lm <= ln)
+ lr = lm * ((long)1 << 32);
+ else
+ lr = lm;
+ lr += lm;
+}
+
+void
+test_nez ()
+{
+ if (lm != 0)
+ lr <<= (1 << 4);
+ lr += lm;
+}
+
+void
+test_eqz ()
+{
+ if (lm == 0)
+ lr >>= (1 << 2);
+ lr += lm;
+}
diff --git a/gcc/testsuite/gcc.target/loongarch/conditional-move-opt-2.c
b/gcc/testsuite/gcc.target/loongarch/conditional-move-opt-2.c
new file mode 100644
index 00000000000..ac72d4d933a
--- /dev/null
+++ b/gcc/testsuite/gcc.target/loongarch/conditional-move-opt-2.c
@@ -0,0 +1,42 @@
+/* { dg-do compile } */
+/* { dg-options "-O2 --param max-rtl-if-conversion-insns=1" } */
+/* { dg-final { scan-assembler-not "maskeqz" } } */
+/* { dg-final { scan-assembler-not "masknez" } } */
+
+/* The relevant optimization is currently only based on noce_try_cmove_arith,
+ so it bypasses noce_convert_multiple_sets by
+ --param max-rtl-if-conversion-insns=1 to execute noce_try_cmove_arith. */
+
+extern long lm, ln, lr;
+
+void
+test_ge ()
+{
+ if (lm >= ln)
+ lr += ((long)1 << 32);
+ lr += lm;
+}
+
+void
+test_ltz ()
+{
+ if (lm < 0)
+ lr |= (1 << 16);
+ lr += lm;
+}
+
+void
+test_lez ()
+{
+ if (lm <= 0)
+ lr &= (1 << 16);
+ lr += lm;
+}
+
+void
+test_gez ()
+{
+ if (lm >= 0)
+ lr ^= (1 << 16);
+ lr += lm;
+}
--
2.20.1
