On Wed, 18 Jul 2012, William J. Schmidt wrote:
> Here's the patch with documentation changes included. I also cleaned up
> missing work from a couple of my previous patches, so
> -fhoist-adjacent-loads is documented now, and -fvect-cost-model is added
> to the list of options on by default at -O3.
>
> Ok for trunk?
Ok if it bootstraps / tests ok.
Thanks,
Richard.
> Thanks,
> Bill
>
>
> 2012-07-18 Bill Schmidt <wschm...@linux.ibm.com>
>
> * doc/invoke.texi: Add -fhoist-adjacent-loads and -ftree-slsr to list
> of flags controlling optimization; add -ftree-slsr to list of flags
> enabled by default at -O; add -fhoist-adjacent-loads to list of flags
> enabled by default at -O2; add -fvect-cost-model to list of flags
> enabled by default at -O3; document -fhoist-adjacent-loads and
> -ftree-slsr.
> * opts.c (default_option): Make -ftree-slsr default at -O1 and above.
> * gimple-ssa-strength-reduction.c (gate_strength_reduction): Use
> flag_tree_slsr.
> * common.opt: Add -ftree-slsr with flag_tree_slsr.
>
>
> Index: gcc/doc/invoke.texi
> ===================================================================
> --- gcc/doc/invoke.texi (revision 189574)
> +++ gcc/doc/invoke.texi (working copy)
> @@ -364,7 +364,8 @@ Objective-C and Objective-C++ Dialects}.
> -ffast-math -ffinite-math-only -ffloat-store -fexcess-precision=@var{style}
> @gol
> -fforward-propagate -ffp-contract=@var{style} -ffunction-sections @gol
> -fgcse -fgcse-after-reload -fgcse-las -fgcse-lm -fgraphite-identity @gol
> --fgcse-sm -fif-conversion -fif-conversion2 -findirect-inlining @gol
> +-fgcse-sm -fhoist-adjacent-loads -fif-conversion @gol
> +-fif-conversion2 -findirect-inlining @gol
> -finline-functions -finline-functions-called-once -finline-limit=@var{n} @gol
> -finline-small-functions -fipa-cp -fipa-cp-clone -fipa-matrix-reorg @gol
> -fipa-pta -fipa-profile -fipa-pure-const -fipa-reference @gol
> @@ -413,8 +414,8 @@ Objective-C and Objective-C++ Dialects}.
> -ftree-phiprop -ftree-loop-distribution -ftree-loop-distribute-patterns @gol
> -ftree-loop-ivcanon -ftree-loop-linear -ftree-loop-optimize @gol
> -ftree-parallelize-loops=@var{n} -ftree-pre -ftree-partial-pre -ftree-pta
> @gol
> --ftree-reassoc @gol
> --ftree-sink -ftree-sra -ftree-switch-conversion -ftree-tail-merge @gol
> +-ftree-reassoc -ftree-sink -ftree-slsr -ftree-sra @gol
> +-ftree-switch-conversion -ftree-tail-merge @gol
> -ftree-ter -ftree-vect-loop-version -ftree-vectorize -ftree-vrp @gol
> -funit-at-a-time -funroll-all-loops -funroll-loops @gol
> -funsafe-loop-optimizations -funsafe-math-optimizations -funswitch-loops @gol
> @@ -6259,6 +6260,7 @@ compilation time.
> -ftree-forwprop @gol
> -ftree-fre @gol
> -ftree-phiprop @gol
> +-ftree-slsr @gol
> -ftree-sra @gol
> -ftree-pta @gol
> -ftree-ter @gol
> @@ -6286,6 +6288,7 @@ also turns on the following optimization flags:
> -fdevirtualize @gol
> -fexpensive-optimizations @gol
> -fgcse -fgcse-lm @gol
> +-fhoist-adjacent-loads @gol
> -finline-small-functions @gol
> -findirect-inlining @gol
> -fipa-sra @gol
> @@ -6311,6 +6314,7 @@ Optimize yet more. @option{-O3} turns on all opti
> by @option{-O2} and also turns on the @option{-finline-functions},
> @option{-funswitch-loops}, @option{-fpredictive-commoning},
> @option{-fgcse-after-reload}, @option{-ftree-vectorize},
> +@option{-fvect-cost-model},
> @option{-ftree-partial-pre} and @option{-fipa-cp-clone} options.
>
> @item -O0
> @@ -7129,6 +7133,13 @@ This flag is enabled by default at @option{-O} and
> Perform hoisting of loads from conditional pointers on trees. This
> pass is enabled by default at @option{-O} and higher.
>
> +@item -fhoist-adjacent-loads
> +@opindex hoist-adjacent-loads
> +Speculatively hoist loads from both branches of an if-then-else if the
> +loads are from adjacent locations in the same structure and the target
> +architecture has a conditional move instruction. This flag is enabled
> +by default at @option{-O2} and higher.
> +
> @item -ftree-copy-prop
> @opindex ftree-copy-prop
> Perform copy propagation on trees. This pass eliminates unnecessary
> @@ -7529,6 +7540,13 @@ defining expression. This results in non-GIMPLE c
> much more complex trees to work on resulting in better RTL generation. This
> is
> enabled by default at @option{-O} and higher.
>
> +@item -ftree-slsr
> +@opindex ftree-slsr
> +Perform straight-line strength reduction on trees. This recognizes related
> +expressions involving multiplications and replaces them by less expensive
> +calculations when possible. This is enabled by default at @option{-O} and
> +higher.
> +
> @item -ftree-vectorize
> @opindex ftree-vectorize
> Perform loop vectorization on trees. This flag is enabled by default at
> @@ -7550,7 +7568,8 @@ except at level @option{-Os} where it is disabled.
>
> @item -fvect-cost-model
> @opindex fvect-cost-model
> -Enable cost model for vectorization.
> +Enable cost model for vectorization. This option is enabled by default at
> +@option{-O3}.
>
> @item -ftree-vrp
> @opindex ftree-vrp
> Index: gcc/opts.c
> ===================================================================
> --- gcc/opts.c (revision 189574)
> +++ gcc/opts.c (working copy)
> @@ -452,6 +452,7 @@ static const struct default_options default_option
> { OPT_LEVELS_1_PLUS, OPT_ftree_ch, NULL, 1 },
> { OPT_LEVELS_1_PLUS, OPT_fcombine_stack_adjustments, NULL, 1 },
> { OPT_LEVELS_1_PLUS, OPT_fcompare_elim, NULL, 1 },
> + { OPT_LEVELS_1_PLUS, OPT_ftree_slsr, NULL, 1 },
>
> /* -O2 optimizations. */
> { OPT_LEVELS_2_PLUS, OPT_finline_small_functions, NULL, 1 },
> Index: gcc/gimple-ssa-strength-reduction.c
> ===================================================================
> --- gcc/gimple-ssa-strength-reduction.c (revision 189574)
> +++ gcc/gimple-ssa-strength-reduction.c (working copy)
> @@ -1501,7 +1501,7 @@ execute_strength_reduction (void)
> static bool
> gate_strength_reduction (void)
> {
> - return optimize > 0;
> + return flag_tree_slsr;
> }
>
> struct gimple_opt_pass pass_strength_reduction =
> Index: gcc/common.opt
> ===================================================================
> --- gcc/common.opt (revision 189574)
> +++ gcc/common.opt (working copy)
> @@ -2080,6 +2080,10 @@ ftree-sink
> Common Report Var(flag_tree_sink) Optimization
> Enable SSA code sinking on trees
>
> +ftree-slsr
> +Common Report Var(flag_tree_slsr) Optimization
> +Perform straight-line strength reduction
> +
> ftree-sra
> Common Report Var(flag_tree_sra) Optimization
> Perform scalar replacement of aggregates
>
>
>
--
Richard Guenther <rguent...@suse.de>
SUSE / SUSE Labs
SUSE LINUX Products GmbH - Nuernberg - AG Nuernberg - HRB 16746
GF: Jeff Hawn, Jennifer Guild, Felix Imend
