On Sat, Oct 5, 2024 at 10:17 AM Andi Kleen <a...@linux.intel.com> wrote:
>
> From: Andi Kleen <a...@gcc.gnu.org>
>
> Time vars normally use times(2) to get the user/sys/wall time, which is
> always a
> system call. I don't think the system time is very useful because most
> overhead
> is in user time. If we only use the wall (or monotonic) time modern OS have an
> optimized path to get it directly from a CPU instruction like RDTSC
> without system call, which is much faster.
>
> Add a -ftime-report-wall option. It actually uses the POSIX monotonic time,
> so strictly it's not wall clock, but it's still a reasonable name.
>
> Comparing the overhead with tramp3d -O0:
>
> ./gcc/cc1plus -quiet ../tsrc/tramp3d-v4.i ran
> 1.03 ± 0.00 times faster than ./gcc/cc1plus -quiet -ftime-report-wall
> ../tsrc/tramp3d-v4.i
> 1.18 ± 0.00 times faster than ./gcc/cc1plus -quiet -ftime-report
> ../tsrc/tramp3d-v4.i
>
> -ftime-report costs 18% (excluding the output), while -ftime-report-wall
> only costs 3%, so is nearly free. So it would be feasible for some build
> system to always enable it and break down the build time into passes.
>
> With -O2 it is a bit less pronounced but still visible:
>
> ./gcc/cc1plus -O2 -quiet ../tsrc/tramp3d-v4.i ran
> 1.00 ± 0.00 times faster than ./gcc/cc1plus -O2 -quiet -ftime-report-wall
> ../tsrc/tramp3d-v4.i
> 1.08 ± 0.01 times faster than ./gcc/cc1plus -O2 -quiet -ftime-report
> ../tsrc/tramp3d-v4.i
>
> The drawback is that if there is context switching with other programs
> the time will be overestimated, however for the common case that the
> system is not oversubscribed it is more accurate because each
> measurement has less overhead.
>
> Bootstrapped on x86_64-linux with full test suite run.
Thanks for doing this - I'd like to open up for discussion whether we
should simply
switch the default and stop recording user/system time for
-ftime-report. One reason
some infrastructure isn't using fine-grained timevars is because of overhead.
So, shouldn't we go without the new option and simply change
-ftime-report behavior?
Related - with -ftime-trace coming up again recently I wonder if we
should transition
to -ftime-report={user,wall,details,trace,...} allowing
-ftime-report=user,details. I'll note
that while adding an option, removing it later is always difficult.
Richard.
> gcc/ChangeLog:
>
> * common.opt (ftime-report-wall): Add.
> * common.opt.urls: Regenerate.
> * doc/invoke.texi: (ftime-report-wall): Document
> * gcc.cc (try_generate_repro): Check for -ftime-report-wall.
> * timevar.cc (get_time): Use clock_gettime if enabled.
> (timer::print): Print only wall time for time_report_wall.
> (make_json_for_timevar_time_def): Dito.
> * toplev.cc (toplev::start_timevars): Check for time_report_wall.
>
> gcc/testsuite/ChangeLog:
>
> * g++.dg/ext/timevar3.C: New test.
>
> ---
>
> v2: Adjust JSON/Sarif output too.
> ---
> gcc/common.opt | 4 +++
> gcc/common.opt.urls | 3 +++
> gcc/doc/invoke.texi | 7 ++++++
> gcc/gcc.cc | 3 ++-
> gcc/testsuite/g++.dg/ext/timevar3.C | 14 +++++++++++
> gcc/timevar.cc | 38 +++++++++++++++++++++++------
> gcc/toplev.cc | 3 ++-
> 7 files changed, 62 insertions(+), 10 deletions(-)
> create mode 100644 gcc/testsuite/g++.dg/ext/timevar3.C
>
> diff --git a/gcc/common.opt b/gcc/common.opt
> index 12b25ff486de..a200a8a0bc45 100644
> --- a/gcc/common.opt
> +++ b/gcc/common.opt
> @@ -3014,6 +3014,10 @@ ftime-report
> Common Var(time_report)
> Report the time taken by each compiler pass.
>
> +ftime-report-wall
> +Common Var(time_report_wall)
> +Report the wall time taken by each compiler.
> +
> ftime-report-details
> Common Var(time_report_details)
> Record times taken by sub-phases separately.
> diff --git a/gcc/common.opt.urls b/gcc/common.opt.urls
> index e31736cd9945..6e79a8f9390b 100644
> --- a/gcc/common.opt.urls
> +++ b/gcc/common.opt.urls
> @@ -1378,6 +1378,9 @@ UrlSuffix(gcc/Optimize-Options.html#index-fthread-jumps)
> ftime-report
> UrlSuffix(gcc/Developer-Options.html#index-ftime-report)
>
> +ftime-report-wall
> +UrlSuffix(gcc/Developer-Options.html#index-ftime-report-wall)
> +
> ftime-report-details
> UrlSuffix(gcc/Developer-Options.html#index-ftime-report-details)
>
> diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
> index d38c1feb86f7..8c11d12e7521 100644
> --- a/gcc/doc/invoke.texi
> +++ b/gcc/doc/invoke.texi
> @@ -784,6 +784,7 @@ Objective-C and Objective-C++ Dialects}.
> -frandom-seed=@var{string} -fsched-verbose=@var{n}
> -fsel-sched-verbose -fsel-sched-dump-cfg -fsel-sched-pipelining-verbose
> -fstats -fstack-usage -ftime-report -ftime-report-details
> +-ftime-report-wall
> -fvar-tracking-assignments-toggle -gtoggle
> -print-file-name=@var{library} -print-libgcc-file-name
> -print-multi-directory -print-multi-lib -print-multi-os-directory
> @@ -21048,6 +21049,12 @@ slightly different place within the compiler.
> @item -ftime-report-details
> Record the time consumed by infrastructure parts separately for each pass.
>
> +@opindex ftime-report-wall
> +@item -ftime-report-wall
> +Report statistics about compiler pass time consumpion, but only using wall
> +time. This is faster than @option{-ftime-report}, but can be more
> +influenced by background jobs.
> +
> @opindex fira-verbose
> @item -fira-verbose=@var{n}
> Control the verbosity of the dump file for the integrated register allocator.
> diff --git a/gcc/gcc.cc b/gcc/gcc.cc
> index 16fed46fb35f..8d3046eb7874 100644
> --- a/gcc/gcc.cc
> +++ b/gcc/gcc.cc
> @@ -7964,7 +7964,8 @@ try_generate_repro (const char **argv)
> it might varry between invocations. */
> else if (! strcmp (argv[nargs], "-quiet"))
> quiet = 1;
> - else if (! strcmp (argv[nargs], "-ftime-report"))
> + else if (! strcmp (argv[nargs], "-ftime-report")
> + || ! strcmp (argv[nargs], "-ftime-report-wall"))
> return;
>
> if (out_arg == -1 || !quiet)
> diff --git a/gcc/testsuite/g++.dg/ext/timevar3.C
> b/gcc/testsuite/g++.dg/ext/timevar3.C
> new file mode 100644
> index 000000000000..b003f37f9654
> --- /dev/null
> +++ b/gcc/testsuite/g++.dg/ext/timevar3.C
> @@ -0,0 +1,14 @@
> +// PR c++/52248
> +// { dg-options "-ftime-report-wall" }
> +// { dg-allow-blank-lines-in-output 1 }
> +// { dg-prune-output "Time variable" }
> +// { dg-prune-output "k" }
> +// { dg-prune-output " 0 " }
> +// { dg-prune-output "checks" }
> +// { dg-prune-output "\[0-9\]+%" }
> +
> +void
> +foo ()
> +{
> + goto lab; // { dg-error "not defined" }
> +}
> diff --git a/gcc/timevar.cc b/gcc/timevar.cc
> index 68bcf44864f9..4930b1175a13 100644
> --- a/gcc/timevar.cc
> +++ b/gcc/timevar.cc
> @@ -243,6 +243,15 @@ get_time (struct timevar_time_def *now)
> now->ggc_mem = timevar_ggc_mem_total;
>
> {
> +#if _POSIX_C_SOURCE >= 199309L
> + if (time_report_wall)
> + {
> + struct timespec ts;
> + clock_gettime (CLOCK_MONOTONIC, &ts);
> + now->wall = ts.tv_sec * 1000000000 + ts.tv_nsec;
> + return;
> + }
> +#endif
> #ifdef USE_TIMES
> struct tms tms;
> now->wall = times (&tms) * ticks_to_nanosec;
> @@ -682,14 +691,16 @@ timer::print_row (FILE *fp,
>
> #ifdef HAVE_USER_TIME
> /* Print user-mode time for this process. */
> - fprintf (fp, "%7.2f (%3.0f%%)",
> + if (!time_report_wall)
> + fprintf (fp, "%7.2f (%3.0f%%)",
> nanosec_to_floating_sec (elapsed.user),
> percent_of (total->user, elapsed.user));
> #endif /* HAVE_USER_TIME */
>
> #ifdef HAVE_SYS_TIME
> + if (!time_report_wall)
> /* Print system-mode time for this process. */
> - fprintf (fp, "%7.2f (%3.0f%%)",
> + fprintf (fp, "%7.2f (%3.0f%%)",
> nanosec_to_floating_sec (elapsed.sys),
> percent_of (total->sys, elapsed.sys));
> #endif /* HAVE_SYS_TIME */
> @@ -754,7 +765,10 @@ timer::print (FILE *fp)
> TIMEVAR. */
> m_start_time = now;
>
> - fprintf (fp, "\n%-35s%16s%14s%14s%14s\n", "Time variable", "usr", "sys",
> + if (time_report_wall)
> + fprintf (fp, "\n%-35s%16s%14s\n", "Time variable", "wall", "GGC");
> + else
> + fprintf (fp, "\n%-35s%16s%14s%14s%14s\n", "Time variable", "usr", "sys",
> "wall", "GGC");
> if (m_jit_client_items)
> fputs ("GCC items:\n", fp);
> @@ -810,13 +824,18 @@ timer::print (FILE *fp)
> /* Print total time. */
> fprintf (fp, " %-35s:", "TOTAL");
> #ifdef HAVE_USER_TIME
> - fprintf (fp, "%7.2f ", nanosec_to_floating_sec (total->user));
> + if (!time_report_wall)
> + fprintf (fp, "%7.2f ", nanosec_to_floating_sec (total->user));
> #endif
> #ifdef HAVE_SYS_TIME
> - fprintf (fp, "%8.2f ", nanosec_to_floating_sec (total->sys));
> + if (!time_report_wall)
> + fprintf (fp, "%8.2f ", nanosec_to_floating_sec (total->sys));
> #endif
> #ifdef HAVE_WALL_TIME
> - fprintf (fp, "%8.2f ", nanosec_to_floating_sec (total->wall));
> + if (!time_report_wall)
> + fprintf (fp, "%8.2f ", nanosec_to_floating_sec (total->wall));
> + else
> + fprintf (fp, "%7.2f ", nanosec_to_floating_sec (total->wall));
> #endif
> fprintf (fp, PRsa (7) "\n", SIZE_AMOUNT (total->ggc_mem));
>
> @@ -842,8 +861,11 @@ json::object *
> make_json_for_timevar_time_def (const timevar_time_def &ttd)
> {
> json::object *obj = new json::object ();
> - obj->set_float ("user", nanosec_to_floating_sec (ttd.user));
> - obj->set_float ("sys", nanosec_to_floating_sec (ttd.sys));
> + if (!time_report_wall)
> + {
> + obj->set_float ("user", nanosec_to_floating_sec (ttd.user));
> + obj->set_float ("sys", nanosec_to_floating_sec (ttd.sys));
> + }
> obj->set_float ("wall", nanosec_to_floating_sec (ttd.wall));
> obj->set_integer ("ggc_mem", ttd.ggc_mem);
> return obj;
> diff --git a/gcc/toplev.cc b/gcc/toplev.cc
> index 5df59b79c803..87fa3f4c8833 100644
> --- a/gcc/toplev.cc
> +++ b/gcc/toplev.cc
> @@ -2247,7 +2247,8 @@ toplev::~toplev ()
> void
> toplev::start_timevars ()
> {
> - if (time_report || !quiet_flag || flag_detailed_statistics)
> + if (time_report || time_report_wall || !quiet_flag
> + || flag_detailed_statistics)
> timevar_init ();
>
> timevar_start (TV_TOTAL);
> --
> 2.46.2
>
