This patch fixes the following:

        vsetvli a5,a1,e32,m1,tu,ma
        slli    a4,a5,2
        sub     a1,a1,a5
        vle32.v v2,0(a0)
        add     a0,a0,a4
        vadd.vv v1,v2,v1
        bne     a1,zero,.L3
        vsetivli        zero,1,e32,m1,ta,ma
        vmv.s.x v2,zero
        vsetvli a5,zero,e32,m1,ta,ma              ---> Redundant vsetvl.
        vredsum.vs      v1,v1,v2
        vmv.x.s a0,v1
        ret

VSETVL PASS is able to fuse avl = 1 of scalar move and VLMAX avl of reduction.

However, this following RTL blocks the fusion in dependence analysis in VSETVL 
PASS:

(insn 49 24 50 5 (set (reg:RVVM1SI 98 v2 [148])
        (if_then_else:RVVM1SI (unspec:RVVMF32BI [
                    (const_vector:RVVMF32BI [
                            (const_int 1 [0x1])
                            repeat [
                                (const_int 0 [0])
                            ]
                        ])
                    (const_int 1 [0x1])
                    (const_int 2 [0x2]) repeated x2
                    (const_int 0 [0])
                    (reg:SI 66 vl)
                    (reg:SI 67 vtype)
                ] UNSPEC_VPREDICATE)
            (const_vector:RVVM1SI repeat [
                    (const_int 0 [0])
                ])
            (unspec:RVVM1SI [
                    (reg:DI 0 zero)
                ] UNSPEC_VUNDEF))) 3813 {*pred_broadcastrvvm1si_zero}
     (nil))
(insn 50 49 51 5 (set (reg:DI 15 a5 [151])                          ---->  It 
set a5, blocks the following VLMAX into the scalar move above.
        (unspec:DI [
                (const_int 32 [0x20])
            ] UNSPEC_VLMAX)) 2566 {vlmax_avldi}
     (expr_list:REG_EQUIV (unspec:DI [
                (const_int 32 [0x20])
            ] UNSPEC_VLMAX)
        (nil)))
(insn 51 50 52 5 (set (reg:RVVM1SI 97 v1 [150])
        (unspec:RVVM1SI [
                (unspec:RVVMF32BI [
                        (const_vector:RVVMF32BI repeat [
                                (const_int 1 [0x1])
                            ])
                        (reg:DI 15 a5 [151])
                        (const_int 2 [0x2])
                        (const_int 1 [0x1])
                        (reg:SI 66 vl)
                        (reg:SI 67 vtype)
                    ] UNSPEC_VPREDICATE)
                (unspec:RVVM1SI [
                        (reg:RVVM1SI 97 v1 [orig:134 vect_result_14.6 ] [134])
                        (reg:RVVM1SI 98 v2 [148])
                    ] UNSPEC_REDUC_SUM)
                (unspec:RVVM1SI [
                        (reg:DI 0 zero)
                    ] UNSPEC_VUNDEF)
            ] UNSPEC_REDUC)) 17541 {pred_redsumrvvm1si}
     (expr_list:REG_DEAD (reg:RVVM1SI 98 v2 [148])
        (expr_list:REG_DEAD (reg:SI 66 vl)
            (expr_list:REG_DEAD (reg:DI 15 a5 [151])
                (expr_list:REG_DEAD (reg:DI 0 zero)
                    (nil))))))

Such situation can only happen on auto-vectorization, never happen on intrinsic 
codes.
Since the reduction is passed VLMAX AVL, it should be more natural to pass 
VLMAX to the scalar move which initial the value of the reduction.

After this patch:

        vsetvli a5,a1,e32,m1,tu,ma
        slli    a4,a5,2
        sub     a1,a1,a5
        vle32.v v2,0(a0)
        add     a0,a0,a4
        vadd.vv v1,v2,v1
        bne     a1,zero,.L3
        vsetvli a5,zero,e32,m1,ta,ma
        vmv.s.x v2,zero
        vredsum.vs      v1,v1,v2
        vmv.x.s a0,v1
        ret

Tested on both RV32/RV64 no regression.

        PR target/113697

gcc/ChangeLog:

        * config/riscv/riscv-v.cc (expand_reduction): Pass VLMAX avl to scalar 
move.

gcc/testsuite/ChangeLog:

        * gcc.target/riscv/rvv/autovec/pr113697.c: New test.

---
 gcc/config/riscv/riscv-v.cc                        | 12 +++++++-----
 .../gcc.target/riscv/rvv/autovec/pr113697.c        | 14 ++++++++++++++
 2 files changed, 21 insertions(+), 5 deletions(-)
 create mode 100644 gcc/testsuite/gcc.target/riscv/rvv/autovec/pr113697.c

diff --git a/gcc/config/riscv/riscv-v.cc b/gcc/config/riscv/riscv-v.cc
index 4bacb7fea45..0cfbd21ce6f 100644
--- a/gcc/config/riscv/riscv-v.cc
+++ b/gcc/config/riscv/riscv-v.cc
@@ -4151,13 +4151,15 @@ expand_reduction (unsigned unspec, unsigned insn_flags, 
rtx *ops, rtx init)
 
   rtx m1_tmp = gen_reg_rtx (m1_mode);
   rtx scalar_move_ops[] = {m1_tmp, init};
-  emit_nonvlmax_insn (code_for_pred_broadcast (m1_mode), SCALAR_MOVE_OP,
-                     scalar_move_ops,
-                     need_mask_operand_p (insn_flags) ? ops[3]
-                                                      : CONST1_RTX (Pmode));
+  insn_code icode = code_for_pred_broadcast (m1_mode);
+  if (need_mask_operand_p (insn_flags))
+    emit_nonvlmax_insn (icode, SCALAR_MOVE_OP, scalar_move_ops, ops[3]);
+  else
+    emit_vlmax_insn (icode, SCALAR_MOVE_OP, scalar_move_ops);
+
   rtx m1_tmp2 = gen_reg_rtx (m1_mode);
   rtx reduc_ops[] = {m1_tmp2, vector_src, m1_tmp};
-  insn_code icode = code_for_pred (unspec, vmode);
+  icode = code_for_pred (unspec, vmode);
 
   if (need_mask_operand_p (insn_flags))
     {
diff --git a/gcc/testsuite/gcc.target/riscv/rvv/autovec/pr113697.c 
b/gcc/testsuite/gcc.target/riscv/rvv/autovec/pr113697.c
new file mode 100644
index 00000000000..588b86c7e6c
--- /dev/null
+++ b/gcc/testsuite/gcc.target/riscv/rvv/autovec/pr113697.c
@@ -0,0 +1,14 @@
+/* { dg-do compile } */
+/* { dg-options "-O3 -march=rv64gcv -mabi=lp64d -fno-schedule-insns" } */
+
+int
+foo (int *__restrict a, int n)
+{
+  int result = 0;
+  for (int i = 0; i < n; i++)
+    result += a[i];
+  return result;
+}
+
+/* { dg-final { scan-assembler-times {vsetvli} 3 } } */
+/* { dg-final { scan-assembler-not {vsetivli} } } */
-- 
2.36.3

Reply via email to