Hi!
The uaddc/usubc usual matching is of the .{ADD,SUB}_OVERFLOW pair in the
middle, which adds/subtracts carry-in (from lower limbs) and computes
carry-out (to higher limbs). Before optimizations (unless user writes
it intentionally that way already), all the steps look the same, but
optimizations simplify the handling of the least significant limb
(one which adds/subtracts 0 carry-in) to just a single
.{ADD,SUB}_OVERFLOW and the handling of the most significant limb
if the computed carry-out is ignored to normal addition/subtraction
of multiple operands.
Now, match_uaddc_usubc has code to turn that least significant
.{ADD,SUB}_OVERFLOW call into .U{ADD,SUB}C call with 0 carry-in if
a more significant limb above it is matched into .U{ADD,SUB}C; this
isn't necessary for functionality, as .ADD_OVERFLOW (x, y) is
functionally equal to .UADDC (x, y, 0) (provided the types of operands
are the same and result is complex type with that type element), and
it also has code to match the most significant limb with ignored carry-out
(in that case one pattern match turns both the penultimate limb pair of
.{ADD,SUB}_OVERFLOW into .U{ADD,SUB}C and the addition/subtraction
of the 4 values (2 carries) into another .U{ADD,SUB}C.
As the following patch shows, what we weren't handling is the case when
one uses either the __builtin_{add,sub}c builtins or hand written forms
thereof (either __builtin_*_overflow or even that written by hand) for
just 2 limbs, where the least significant has 0 carry-in and the most
significant ignores carry-out. The following patch matches that, e.g.
_16 = .ADD_OVERFLOW (_1, _2);
_17 = REALPART_EXPR <_16>;
_18 = IMAGPART_EXPR <_16>;
_15 = _3 + _4;
_12 = _15 + _18;
into
_16 = .UADDC (_1, _2, 0);
_17 = REALPART_EXPR <_16>;
_18 = IMAGPART_EXPR <_16>;
_19 = .UADDC (_3, _4, _18);
_12 = IMAGPART_EXPR <_19>;
so that we can emit better code.
As the 2 later comments show, we must do that carefully, because the
pass walks the IL from first to last stmt in a bb and we must avoid
pattern matching this way something that should be matched on a later
instruction differently.
Bootstrapped/regtested on x86_64-linux and i686-linux, ok for trunk?
2023-08-29 Jakub Jelinek <ja...@redhat.com>
PR middle-end/79173
PR middle-end/111209
* tree-ssa-math-opts.cc (match_uaddc_usubc): Match also
just 2 limb uaddc/usubc with 0 carry-in on lower limb and ignored
carry-out on higher limb. Don't match it though if it could be
matched later on 4 argument addition/subtraction.
* gcc.target/i386/pr79173-12.c: New test.
--- gcc/tree-ssa-math-opts.cc.jj 2023-08-08 15:55:09.498122557 +0200
+++ gcc/tree-ssa-math-opts.cc 2023-08-28 20:51:31.893886862 +0200
@@ -4641,8 +4641,135 @@ match_uaddc_usubc (gimple_stmt_iterator
__imag__ of something, verify it is .UADDC/.USUBC. */
tree rhs1 = gimple_assign_rhs1 (im);
gimple *ovf = SSA_NAME_DEF_STMT (TREE_OPERAND (rhs1, 0));
+ tree ovf_lhs = NULL_TREE;
+ tree ovf_arg1 = NULL_TREE, ovf_arg2 = NULL_TREE;
if (gimple_call_internal_p (ovf, code == PLUS_EXPR
- ? IFN_UADDC : IFN_USUBC)
+ ? IFN_ADD_OVERFLOW
+ : IFN_SUB_OVERFLOW))
+ {
+ /* Or verify it is .ADD_OVERFLOW/.SUB_OVERFLOW.
+ This is for the case of 2 chained .UADDC/.USUBC,
+ where the first one uses 0 carry-in and the second
+ one ignores the carry-out.
+ So, something like:
+ _16 = .ADD_OVERFLOW (_1, _2);
+ _17 = REALPART_EXPR <_16>;
+ _18 = IMAGPART_EXPR <_16>;
+ _15 = _3 + _4;
+ _12 = _15 + _18;
+ where the first 3 statements come from the lower
+ limb addition and the last 2 from the higher limb
+ which ignores carry-out. */
+ ovf_lhs = gimple_call_lhs (ovf);
+ tree ovf_lhs_type = TREE_TYPE (TREE_TYPE (ovf_lhs));
+ ovf_arg1 = gimple_call_arg (ovf, 0);
+ ovf_arg2 = gimple_call_arg (ovf, 1);
+ /* In that case we need to punt if the types don't
+ mismatch. */
+ if (!types_compatible_p (type, ovf_lhs_type)
+ || !types_compatible_p (type, TREE_TYPE (ovf_arg1))
+ || !types_compatible_p (type,
+ TREE_TYPE (ovf_arg2)))
+ ovf_lhs = NULL_TREE;
+ else
+ {
+ for (int i = (code == PLUS_EXPR ? 1 : 0);
+ i >= 0; --i)
+ {
+ tree r = gimple_call_arg (ovf, i);
+ if (TREE_CODE (r) != SSA_NAME)
+ continue;
+ if (uaddc_is_cplxpart (SSA_NAME_DEF_STMT (r),
+ REALPART_EXPR))
+ {
+ /* Punt if one of the args which isn't
+ subtracted isn't __real__; that could
+ then prevent better match later.
+ Consider:
+ _3 = .ADD_OVERFLOW (_1, _2);
+ _4 = REALPART_EXPR <_3>;
+ _5 = IMAGPART_EXPR <_3>;
+ _7 = .ADD_OVERFLOW (_4, _6);
+ _8 = REALPART_EXPR <_7>;
+ _9 = IMAGPART_EXPR <_7>;
+ _12 = _10 + _11;
+ _13 = _12 + _9;
+ _14 = _13 + _5;
+ We want to match this when called on
+ the last stmt as a pair of .UADDC calls,
+ but without this check we could turn
+ that prematurely on _13 = _12 + _9;
+ stmt into .UADDC with 0 carry-in just
+ on the second .ADD_OVERFLOW call and
+ another replacing the _12 and _13
+ additions. */
+ ovf_lhs = NULL_TREE;
+ break;
+ }
+ }
+ }
+ if (ovf_lhs)
+ {
+ use_operand_p use_p;
+ imm_use_iterator iter;
+ tree re_lhs = NULL_TREE;
+ FOR_EACH_IMM_USE_FAST (use_p, iter, ovf_lhs)
+ {
+ gimple *use_stmt = USE_STMT (use_p);
+ if (is_gimple_debug (use_stmt))
+ continue;
+ if (use_stmt == im)
+ continue;
+ if (!uaddc_is_cplxpart (use_stmt,
+ REALPART_EXPR))
+ {
+ ovf_lhs = NULL_TREE;
+ break;
+ }
+ re_lhs = gimple_assign_lhs (use_stmt);
+ }
+ if (ovf_lhs && re_lhs)
+ {
+ FOR_EACH_IMM_USE_FAST (use_p, iter, re_lhs)
+ {
+ gimple *use_stmt = USE_STMT (use_p);
+ if (is_gimple_debug (use_stmt))
+ continue;
+ internal_fn ifn
+ = gimple_call_internal_fn (ovf);
+ /* Punt if the __real__ of lhs is used
+ in the same .*_OVERFLOW call.
+ Consider:
+ _3 = .ADD_OVERFLOW (_1, _2);
+ _4 = REALPART_EXPR <_3>;
+ _5 = IMAGPART_EXPR <_3>;
+ _7 = .ADD_OVERFLOW (_4, _6);
+ _8 = REALPART_EXPR <_7>;
+ _9 = IMAGPART_EXPR <_7>;
+ _12 = _10 + _11;
+ _13 = _12 + _5;
+ _14 = _13 + _9;
+ We want to match this when called on
+ the last stmt as a pair of .UADDC calls,
+ but without this check we could turn
+ that prematurely on _13 = _12 + _5;
+ stmt into .UADDC with 0 carry-in just
+ on the first .ADD_OVERFLOW call and
+ another replacing the _12 and _13
+ additions. */
+ if (gimple_call_internal_p (use_stmt, ifn))
+ {
+ ovf_lhs = NULL_TREE;
+ break;
+ }
+ }
+ }
+ }
+ }
+ if ((ovf_lhs
+ || gimple_call_internal_p (ovf,
+ code == PLUS_EXPR
+ ? IFN_UADDC : IFN_USUBC))
&& (optab_handler (code == PLUS_EXPR
? uaddc5_optab : usubc5_optab,
TYPE_MODE (type))
@@ -4668,6 +4795,26 @@ match_uaddc_usubc (gimple_stmt_iterator
TREE_TYPE (ilhs),
nlhs));
gsi_replace (gsi, g, true);
+ /* And if it is initialized from result of __imag__
+ of .{ADD,SUB}_OVERFLOW call, replace that
+ call with .U{ADD,SUB}C call with the same arguments,
+ just 0 added as third argument. This isn't strictly
+ necessary, .ADD_OVERFLOW (x, y) and .UADDC (x, y, 0)
+ produce the same result, but may result in better
+ generated code on some targets where the backend can
+ better prepare in how the result will be used. */
+ if (ovf_lhs)
+ {
+ tree zero = build_zero_cst (type);
+ g = gimple_build_call_internal (code == PLUS_EXPR
+ ? IFN_UADDC
+ : IFN_USUBC,
+ 3, ovf_arg1,
+ ovf_arg2, zero);
+ gimple_call_set_lhs (g, ovf_lhs);
+ gimple_stmt_iterator gsi2 = gsi_for_stmt (ovf);
+ gsi_replace (&gsi2, g, true);
+ }
return true;
}
}
--- gcc/testsuite/gcc.target/i386/pr79173-12.c.jj 2023-08-28
19:51:23.574518679 +0200
+++ gcc/testsuite/gcc.target/i386/pr79173-12.c 2023-08-28 19:51:52.260124877
+0200
@@ -0,0 +1,48 @@
+/* PR middle-end/79173 */
+/* PR middle-end/111209 */
+/* { dg-do compile } */
+/* { dg-options "-O2 -fno-stack-protector -masm=att" } */
+/* { dg-final { scan-assembler-times "addq\t%r\[^\n\r]*, \\\(%rdi\\\)" 1 {
target lp64 } } } */
+/* { dg-final { scan-assembler-times "adcq\t%r\[^\n\r]*, 8\\\(%rdi\\\)" 1 {
target lp64 } } } */
+/* { dg-final { scan-assembler-times "subq\t%r\[^\n\r]*, \\\(%rdi\\\)" 1 {
target lp64 } } } */
+/* { dg-final { scan-assembler-times "sbbq\t%r\[^\n\r]*, 8\\\(%rdi\\\)" 1 {
target lp64 } } } */
+/* { dg-final { scan-assembler-times "addl\t%e\[^\n\r]*, \\\(%e\[^\n\r]*\\\)"
1 { target ia32 } } } */
+/* { dg-final { scan-assembler-times "adcl\t%e\[^\n\r]*, 4\\\(%e\[^\n\r]*\\\)"
1 { target ia32 } } } */
+/* { dg-final { scan-assembler-times "subl\t%e\[^\n\r]*, \\\(%e\[^\n\r]*\\\)"
1 { target ia32 } } } */
+/* { dg-final { scan-assembler-times "sbbl\t%e\[^\n\r]*, 4\\\(%e\[^\n\r]*\\\)"
1 { target ia32 } } } */
+
+static unsigned long
+uaddc (unsigned long x, unsigned long y, unsigned long carry_in, unsigned long
*carry_out)
+{
+ unsigned long r;
+ unsigned long c1 = __builtin_add_overflow (x, y, &r);
+ unsigned long c2 = __builtin_add_overflow (r, carry_in, &r);
+ *carry_out = c1 + c2;
+ return r;
+}
+
+static unsigned long
+usubc (unsigned long x, unsigned long y, unsigned long carry_in, unsigned long
*carry_out)
+{
+ unsigned long r;
+ unsigned long c1 = __builtin_sub_overflow (x, y, &r);
+ unsigned long c2 = __builtin_sub_overflow (r, carry_in, &r);
+ *carry_out = c1 + c2;
+ return r;
+}
+
+void
+foo (unsigned long *p, unsigned long *q)
+{
+ unsigned long c;
+ p[0] = uaddc (p[0], q[0], 0, &c);
+ p[1] = uaddc (p[1], q[1], c, &c);
+}
+
+void
+bar (unsigned long *p, unsigned long *q)
+{
+ unsigned long c;
+ p[0] = usubc (p[0], q[0], 0, &c);
+ p[1] = usubc (p[1], q[1], c, &c);
+}
Jakub
