Okay, I have restored the original behavior where standard streams
were considered weak. Thus in case of a conflict, the
standard streams have lower precedence. For example,
gcc -O2 -fdump-tree-pre=stdout -fdump-tree-pre ...
does the PRE dump in auto numbered file since stdout has lower
precedence. Also this works as expected,
gcc -O2 -fdump-tree-pre=pre.txt -fdump-tree-all=stderr ...
It outputs PRE dump to pre.txt while the remaining tree dumps are
output on to stderr. Does it look okay?
Thanks,
Sharad
2012-05-09 Sharad Singhai <[email protected]>
* doc/invoke.texi: Add documentation for the new option.
* tree-dump.c (dump_get_standard_stream): New function.
(dump_files): Update for new field.
(dump_switch_p_1): Handle dump filenames.
(dump_begin): Likewise.
(get_dump_file_name): Likewise.
(dump_end): Remove attribute.
(dump_enable_all): Add new parameter FILENAME.
All callers updated.
* tree-pass.h (enum tree_dump_index): Add new constant.
(struct dump_file_info): Add new field FILENAME.
* testsuite/g++.dg/other/dump-filename-1.C: New test.
Index: doc/invoke.texi
===================================================================
--- doc/invoke.texi (revision 187265)
+++ doc/invoke.texi (working copy)
@@ -5322,20 +5322,23 @@ Here are some examples showing uses of these optio
@item -d@var{letters}
@itemx -fdump-rtl-@var{pass}
+@itemx -fdump-rtl-@var{pass}=@var{filename}
@opindex d
Says to make debugging dumps during compilation at times specified by
@var{letters}. This is used for debugging the RTL-based passes of the
compiler. The file names for most of the dumps are made by appending
a pass number and a word to the @var{dumpname}, and the files are
-created in the directory of the output file. Note that the pass
-number is computed statically as passes get registered into the pass
-manager. Thus the numbering is not related to the dynamic order of
-execution of passes. In particular, a pass installed by a plugin
-could have a number over 200 even if it executed quite early.
-@var{dumpname} is generated from the name of the output file, if
-explicitly specified and it is not an executable, otherwise it is the
-basename of the source file. These switches may have different effects
-when @option{-E} is used for preprocessing.
+created in the directory of the output file. If the
+@option{=@var{filename}} is appended to the longer form of the dump
+option then the dump is done on that file instead of numbered
+files. Note that the pass number is computed statically as passes get
+registered into the pass manager. Thus the numbering is not related
+to the dynamic order of execution of passes. In particular, a pass
+installed by a plugin could have a number over 200 even if it executed
+quite early. @var{dumpname} is generated from the name of the output
+file, if explicitly specified and it is not an executable, otherwise
+it is the basename of the source file. These switches may have
+different effects when @option{-E} is used for preprocessing.
Debug dumps can be enabled with a @option{-fdump-rtl} switch or some
@option{-d} option @var{letters}. Here are the possible
@@ -5719,15 +5722,18 @@ counters for each function compiled.
@item -fdump-tree-@var{switch}
@itemx -fdump-tree-@var{switch}-@var{options}
+@itemx -fdump-tree-@var{switch}-@var{options}=@var{filename}
@opindex fdump-tree
Control the dumping at various stages of processing the intermediate
language tree to a file. The file name is generated by appending a
switch specific suffix to the source file name, and the file is
-created in the same directory as the output file. If the
-@samp{-@var{options}} form is used, @var{options} is a list of
-@samp{-} separated options which control the details of the dump. Not
-all options are applicable to all dumps; those that are not
-meaningful are ignored. The following options are available
+created in the same directory as the output file. In case of
+@option{=@var{filename}} option, the dump is output on the given file
+name instead. If the @samp{-@var{options}} form is used,
+@var{options} is a list of @samp{-} separated options which control
+the details or location of the dump. Not all options are applicable
+to all dumps; those that are not meaningful are ignored. The
+following options are available
@table @samp
@item address
@@ -5765,9 +5771,49 @@ Enable showing the tree dump for each statement.
Enable showing the EH region number holding each statement.
@item scev
Enable showing scalar evolution analysis details.
+@item slim
+Inhibit dumping of members of a scope or body of a function merely
+because that scope has been reached. Only dump such items when they
+are directly reachable by some other path. When dumping pretty-printed
+trees, this option inhibits dumping the bodies of control structures.
+@item =@var{filename}
+Instead of using an auto generated dump file name, use the given file
+name. The file names @file{stdout} and @file{stderr} are treated
+specially and are considered already open standard streams. In
+addition, the standard streams @file{stdout} and @file{stderr} are
+considered weak, i.e., in case of a conflict, some other applicable
+dump file is used instead. For example:
+
+@smallexample
+gcc -O2 -fdump-tree-pre=stderr -fdump-rtl-ira=ira.txt ...
+@end smallexample
+
+outputs PRE dump on @file{stderr}, while the IRA dump is output in a
+file named @file{ira.txt}.
+
+Usually the command line file names have precedence over automatic
+file names unless the command line file name is a standard stream. For
+example:
+
+@smallexample
+gcc -O2 -fdump-tree-pre=stdout -fdump-tree-pre ...
+gcc -O2 -fdump-tree-pre -fdump-tree-pre=stdout ...
+@end smallexample
+
+Both of the above output the PRE dump into an auto generated file name
+since the @file{stdout} stream has lower precedence. As another
+example,
+
+@smallexample
+gcc -O2 -fdump-tree-pre=pre.txt -fdump-tree-all=stderr ...
+@end smallexample
+
+outputs all the tree dumps on @file{stderr}, except the PRE dump,
+which is output into @file{pre.txt}.
+
@item all
-Turn on all options, except @option{raw}, @option{slim}, @option{verbose}
-and @option{lineno}.
+Turn on all options, except @option{raw}, @option{slim}, @option{verbose},
+@option{lineno}.
@end table
The following tree dumps are possible:
@@ -5913,6 +5959,7 @@ is made by appending @file{.vrp} to the source fil
@item all
@opindex fdump-tree-all
Enable all the available tree dumps with the flags provided in this option.
+
@end table
@item -ftree-vectorizer-verbose=@var{n}
Index: tree-dump.c
===================================================================
--- tree-dump.c (revision 187265)
+++ tree-dump.c (working copy)
@@ -773,20 +773,20 @@ dump_node (const_tree t, int flags, FILE *stream)
tree_dump_index enumeration in tree-pass.h. */
static struct dump_file_info dump_files[TDI_end] =
{
- {NULL, NULL, NULL, 0, 0, 0},
- {".cgraph", "ipa-cgraph", NULL, TDF_IPA, 0, 0},
- {".tu", "translation-unit", NULL, TDF_TREE, 0, 1},
- {".class", "class-hierarchy", NULL, TDF_TREE, 0, 2},
- {".original", "tree-original", NULL, TDF_TREE, 0, 3},
- {".gimple", "tree-gimple", NULL, TDF_TREE, 0, 4},
- {".nested", "tree-nested", NULL, TDF_TREE, 0, 5},
- {".vcg", "tree-vcg", NULL, TDF_TREE, 0, 6},
- {".ads", "ada-spec", NULL, 0, 0, 7},
+ {NULL, NULL, NULL, NULL, 0, 0, 0},
+ {".cgraph", "ipa-cgraph", NULL, NULL, TDF_IPA, 0, 0},
+ {".tu", "translation-unit", NULL, NULL, TDF_TREE, 0, 1},
+ {".class", "class-hierarchy", NULL, NULL, TDF_TREE, 0, 2},
+ {".original", "tree-original", NULL, NULL, TDF_TREE, 0, 3},
+ {".gimple", "tree-gimple", NULL, NULL, TDF_TREE, 0, 4},
+ {".nested", "tree-nested", NULL, NULL, TDF_TREE, 0, 5},
+ {".vcg", "tree-vcg", NULL, NULL, TDF_TREE, 0, 6},
+ {".ads", "ada-spec", NULL, NULL, 0, 0, 7},
#define FIRST_AUTO_NUMBERED_DUMP 8
- {NULL, "tree-all", NULL, TDF_TREE, 0, 0},
- {NULL, "rtl-all", NULL, TDF_RTL, 0, 0},
- {NULL, "ipa-all", NULL, TDF_IPA, 0, 0},
+ {NULL, "tree-all", NULL, NULL, TDF_TREE, 0, 0},
+ {NULL, "rtl-all", NULL, NULL, TDF_RTL, 0, 0},
+ {NULL, "ipa-all", NULL, NULL, TDF_IPA, 0, 0},
};
/* Dynamically registered tree dump files and switches. */
@@ -802,7 +802,7 @@ struct dump_option_value_info
};
/* Table of dump options. This must be consistent with the TDF_* flags
- in tree.h */
+ in tree-pass.h */
static const struct dump_option_value_info dump_options[] =
{
{"address", TDF_ADDRESS},
@@ -892,6 +892,9 @@ get_dump_file_name (int phase)
if (dfi->state == 0)
return NULL;
+ if (dfi->filename)
+ return xstrdup (dfi->filename);
+
if (dfi->num < 0)
dump_id[0] = '\0';
else
@@ -911,6 +914,22 @@ get_dump_file_name (int phase)
return concat (dump_base_name, dump_id, dfi->suffix, NULL);
}
+/* If FILENAME is a standard stream (stdout or stderr), return that
+ stream, otherwise return NULL. */
+
+static FILE *
+dump_get_standard_stream (const char *filename)
+{
+ if (!filename)
+ return NULL;
+
+ return strcmp("stderr", filename) == 0
+ ? stderr
+ : strcmp("stdout", filename) == 0
+ ? stdout
+ : NULL;
+}
+
/* Begin a tree dump for PHASE. Stores any user supplied flag in
*FLAG_PTR and returns a stream to write to. If the dump is not
enabled, returns NULL.
@@ -926,14 +945,20 @@ dump_begin (int phase, int *flag_ptr)
if (phase == TDI_none || !dump_enabled_p (phase))
return NULL;
- name = get_dump_file_name (phase);
dfi = get_dump_file_info (phase);
- stream = fopen (name, dfi->state < 0 ? "w" : "a");
- if (!stream)
- error ("could not open dump file %qs: %m", name);
+ stream = dump_get_standard_stream (dfi->filename);
+ if (stream)
+ dfi->state = 1;
else
- dfi->state = 1;
- free (name);
+ {
+ name = get_dump_file_name (phase);
+ stream = fopen (name, dfi->state < 0 ? "w" : "a");
+ if (!stream)
+ error ("could not open dump file %qs: %m", name);
+ else
+ dfi->state = 1;
+ free (name);
+ }
if (flag_ptr)
*flag_ptr = dfi->flags;
@@ -987,35 +1012,60 @@ dump_flag_name (int phase)
dump_begin. */
void
-dump_end (int phase ATTRIBUTE_UNUSED, FILE *stream)
+dump_end (int phase, FILE *stream)
{
- fclose (stream);
+ struct dump_file_info *dfi = get_dump_file_info (phase);
+ if (!dump_get_standard_stream (dfi->filename))
+ fclose (stream);
}
-/* Enable all tree dumps. Return number of enabled tree dumps. */
+/* Enable all tree dumps with FLAGS on FILENAME. Return number of
+ enabled tree dumps. */
static int
-dump_enable_all (int flags)
+dump_enable_all (int flags, const char *filename)
{
int ir_dump_type = (flags & (TDF_TREE | TDF_RTL | TDF_IPA));
int n = 0;
size_t i;
for (i = TDI_none + 1; i < (size_t) TDI_end; i++)
- if ((dump_files[i].flags & ir_dump_type))
- {
- dump_files[i].state = -1;
- dump_files[i].flags |= flags;
- n++;
- }
+ {
+ if ((dump_files[i].flags & ir_dump_type))
+ {
+ const char *old_filename = dump_files[i].filename;
+ dump_files[i].state = -1;
+ dump_files[i].flags |= flags;
+ n++;
+ /* Do we need to override an existing filename? */
+ if (filename && (!old_filename
+ || dump_get_standard_stream (old_filename)))
+ {
+ dump_files[i].filename = xstrdup (filename);
+ if (filename != old_filename)
+ free ((void *)old_filename);
+ }
+ }
+ }
for (i = 0; i < extra_dump_files_in_use; i++)
- if ((extra_dump_files[i].flags & ir_dump_type))
- {
- extra_dump_files[i].state = -1;
- extra_dump_files[i].flags |= flags;
- n++;
- }
+ {
+ if ((extra_dump_files[i].flags & ir_dump_type))
+ {
+ const char *old_filename = extra_dump_files[i].filename;
+ extra_dump_files[i].state = -1;
+ extra_dump_files[i].flags |= flags;
+ n++;
+ /* Do we need to override an existing filename? */
+ if (filename && (!old_filename
+ || dump_get_standard_stream (old_filename)))
+ {
+ extra_dump_files[i].filename = xstrdup (filename);
+ if (filename != old_filename)
+ free ((void *)old_filename);
+ }
+ }
+ }
return n;
}
@@ -1037,7 +1087,7 @@ dump_switch_p_1 (const char *arg, struct dump_file
if (!option_value)
return 0;
- if (*option_value && *option_value != '-')
+ if (*option_value && *option_value != '-' && *option_value != '=')
return 0;
ptr = option_value;
@@ -1052,30 +1102,61 @@ dump_switch_p_1 (const char *arg, struct dump_file
while (*ptr == '-')
ptr++;
end_ptr = strchr (ptr, '-');
+
if (!end_ptr)
end_ptr = ptr + strlen (ptr);
length = end_ptr - ptr;
+ if (*ptr == '=')
+ {
+ /* Interpret rest of the argument as a dump filename. This
+ filename overrides generated dump names as well as other
+ command line filenames. However, the standard streams are
+ considered weak, i.e. they do not override other
+ filenames. */
+ const char *filename = ptr + 1;
+
+ if (!dump_get_standard_stream (filename)
+ || !dfi->state
+ || dump_get_standard_stream (dfi->filename))
+ {
+ free ((void *)dfi->filename);
+ dfi->filename = xstrdup (ptr + 1);
+ }
+ flags |= TDF_FILENAME;
+ break;
+ }
+
for (option_ptr = dump_options; option_ptr->name; option_ptr++)
if (strlen (option_ptr->name) == length
&& !memcmp (option_ptr->name, ptr, length))
- {
- flags |= option_ptr->value;
+ {
+ flags |= option_ptr->value;
goto found;
- }
+ }
warning (0, "ignoring unknown option %q.*s in %<-fdump-%s%>",
length, ptr, dfi->swtch);
found:;
ptr = end_ptr;
}
+ /* For the same dump seen again, override the standard stream
+ because it is considered as a weak filename. */
+ if ((dfi->flags & TDF_FILENAME)
+ && !(flags & TDF_FILENAME)
+ && dump_get_standard_stream (dfi->filename))
+ {
+ dfi->flags &= ~TDF_FILENAME;
+ free ((void *)dfi->filename);
+ dfi->filename = NULL;
+ }
dfi->state = -1;
dfi->flags |= flags;
/* Process -fdump-tree-all and -fdump-rtl-all, by enabling all the
known dumps. */
if (dfi->suffix == NULL)
- dump_enable_all (dfi->flags);
+ dump_enable_all (dfi->flags, dfi->filename);
return 1;
}
@@ -1124,5 +1205,5 @@ dump_function (int phase, tree fn)
bool
enable_rtl_dump_file (void)
{
- return dump_enable_all (TDF_RTL | TDF_DETAILS | TDF_BLOCKS) > 0;
+ return dump_enable_all (TDF_RTL | TDF_DETAILS | TDF_BLOCKS, NULL) > 0;
}
Index: tree-pass.h
===================================================================
--- tree-pass.h (revision 187265)
+++ tree-pass.h (working copy)
@@ -84,8 +84,9 @@ enum tree_dump_index
#define TDF_ENUMERATE_LOCALS (1 << 22) /* Enumerate locals by uid. */
#define TDF_CSELIB (1 << 23) /* Dump cselib details. */
#define TDF_SCEV (1 << 24) /* Dump SCEV details. */
+#define TDF_FILENAME (1 << 25) /* Dump on provided filename
+ instead of constructing one. */
-
/* In tree-dump.c */
extern char *get_dump_file_name (int);
@@ -222,6 +223,8 @@ struct dump_file_info
const char *suffix; /* suffix to give output file. */
const char *swtch; /* command line switch */
const char *glob; /* command line glob */
+ const char *filename; /* use this filename instead of making
+ up one using dump_base_name + suffix. */
int flags; /* user flags */
int state; /* state of play */
int num; /* dump file number */
Index: testsuite/g++.dg/other/dump-filename-1.C
===================================================================
--- testsuite/g++.dg/other/dump-filename-1.C (revision 0)
+++ testsuite/g++.dg/other/dump-filename-1.C (revision 0)
@@ -0,0 +1,11 @@
+// Test that the dump to a user-defined file works correctly.
+/* { dg-options "-O2 -fdump-tree-original=foobar.dump" } */
+
+void test (int *b, int *e, int stride)
+ {
+ for (int *p = b; p != e; p += stride)
+ *p = 1;
+ }
+
+/* { dg-final { scan-file foobar.dump ";; Function void test" } } */
+/* { dg-final { remove-build-file "foobar.dump" } } */
Sharad
On Wed, May 9, 2012 at 5:31 PM, Xinliang David Li <[email protected]> wrote:
> Bummer. I was thinking to reserve '=' for selective dumping:
>
> -fdump-tree-pre=<func_list_regexp>
>
> I guess this can be achieved via @
>
> -fdump-tree-pre@<func_list>
>
> -fdump-tree-pre=<file_name>@<func_list>
>
>
> Another issue -- I don't think the current precedence rule is correct.
> Consider that -fopt-info=2 will be mapped to
>
> -fdump-tree-all-transform-verbose2=stderr
> -fdump-rtl-all-transform-verbose2=stderr
>
> then
>
> the current precedence rule will cause surprise when the following is used
>
> -fopt-info -fdump-tree-pre
>
> The PRE dump will be emitted to stderr which is not what user wants.
> In short, special streams should be treated as 'weak' the same way as
> your previous implementation.
>
> thanks,
>
> David
>
>
>
> On Wed, May 9, 2012 at 4:56 PM, Sharad Singhai <[email protected]> wrote:
>> Thanks for your suggestions/comments. I have updated the patch and
>> documentation. It supports the following usage:
>>
>> gcc .... -fdump-tree-all=tree.dump -fdump-tree-pre=stdout
>> -fdump-rtl-ira=ira.dump
>>
>> Here all tree dumps except the PRE are output into tree.dump, PRE dump
>> goes to stdout and the IRA dump goes to ira.dump.
>>
>> Thanks,
>> Sharad
>>
>> 2012-05-09 Sharad Singhai <[email protected]>
>>
>> * doc/invoke.texi: Add documentation for the new option.
>> * tree-dump.c (dump_get_standard_stream): New function.
>> (dump_files): Update for new field.
>> (dump_switch_p_1): Handle dump filenames.
>> (dump_begin): Likewise.
>> (get_dump_file_name): Likewise.
>> (dump_end): Remove attribute.
>> (dump_enable_all): Add new parameter FILENAME.
>> All callers updated.
>> (enable_rtl_dump_file):
>> * tree-pass.h (enum tree_dump_index): Add new constant.
>> (struct dump_file_info): Add new field FILENAME.
>> * testsuite/g++.dg/other/dump-filename-1.C: New test.
>>
>> Index: doc/invoke.texi
>> ===================================================================
>> --- doc/invoke.texi (revision 187265)
>> +++ doc/invoke.texi (working copy)
>> @@ -5322,20 +5322,23 @@ Here are some examples showing uses of these optio
>>
>> @item -d@var{letters}
>> @itemx -fdump-rtl-@var{pass}
>> +@itemx -fdump-rtl-@var{pass}=@var{filename}
>> @opindex d
>> Says to make debugging dumps during compilation at times specified by
>> @var{letters}. This is used for debugging the RTL-based passes of the
>> compiler. The file names for most of the dumps are made by appending
>> a pass number and a word to the @var{dumpname}, and the files are
>> -created in the directory of the output file. Note that the pass
>> -number is computed statically as passes get registered into the pass
>> -manager. Thus the numbering is not related to the dynamic order of
>> -execution of passes. In particular, a pass installed by a plugin
>> -could have a number over 200 even if it executed quite early.
>> -@var{dumpname} is generated from the name of the output file, if
>> -explicitly specified and it is not an executable, otherwise it is the
>> -basename of the source file. These switches may have different effects
>> -when @option{-E} is used for preprocessing.
>> +created in the directory of the output file. If the
>> +@option{=@var{filename}} is appended to the longer form of the dump
>> +option then the dump is done on that file instead of numbered
>> +files. Note that the pass number is computed statically as passes get
>> +registered into the pass manager. Thus the numbering is not related
>> +to the dynamic order of execution of passes. In particular, a pass
>> +installed by a plugin could have a number over 200 even if it executed
>> +quite early. @var{dumpname} is generated from the name of the output
>> +file, if explicitly specified and it is not an executable, otherwise
>> +it is the basename of the source file. These switches may have
>> +different effects when @option{-E} is used for preprocessing.
>>
>> Debug dumps can be enabled with a @option{-fdump-rtl} switch or some
>> @option{-d} option @var{letters}. Here are the possible
>> @@ -5719,15 +5722,18 @@ counters for each function compiled.
>>
>> @item -fdump-tree-@var{switch}
>> @itemx -fdump-tree-@var{switch}-@var{options}
>> +@itemx -fdump-tree-@var{switch}-@var{options}=@var{filename}
>> @opindex fdump-tree
>> Control the dumping at various stages of processing the intermediate
>> language tree to a file. The file name is generated by appending a
>> switch specific suffix to the source file name, and the file is
>> -created in the same directory as the output file. If the
>> -@samp{-@var{options}} form is used, @var{options} is a list of
>> -@samp{-} separated options which control the details of the dump. Not
>> -all options are applicable to all dumps; those that are not
>> -meaningful are ignored. The following options are available
>> +created in the same directory as the output file. In case of
>> +@option{=@var{filename}} option, the dump is output on the given file
>> +name instead. If the @samp{-@var{options}} form is used,
>> +@var{options} is a list of @samp{-} separated options which control
>> +the details or location of the dump. Not all options are applicable
>> +to all dumps; those that are not meaningful are ignored. The
>> +following options are available
>>
>> @table @samp
>> @item address
>> @@ -5765,9 +5771,46 @@ Enable showing the tree dump for each statement.
>> Enable showing the EH region number holding each statement.
>> @item scev
>> Enable showing scalar evolution analysis details.
>> +@item slim
>> +Inhibit dumping of members of a scope or body of a function merely
>> +because that scope has been reached. Only dump such items when they
>> +are directly reachable by some other path. When dumping pretty-printed
>> +trees, this option inhibits dumping the bodies of control structures.
>> +@item =@var{filename}
>> +Instead of using an auto generated dump file name, use the given file
>> +name. The file names @file{stdout} and @file{stderr} are treated
>> +specially and are considered already open standard streams. For
>> +example:
>> +
>> +@smallexample
>> +gcc -O2 -fdump-tree-pre=stderr -fdump-rtl-ira=ira.txt ...
>> +@end smallexample
>> +
>> +outputs PRE dump on @file{stderr}, while the IRA dump is output in a
>> +file named @file{ira.txt}.
>> +
>> +In case of any conflicts, the command line file name takes precedence
>> +over generated file names. For example:
>> +
>> +@smallexample
>> +gcc -O2 -fdump-tree-pre=stdout -fdump-tree-pre ...
>> +gcc -O2 -fdump-tree-pre -fdump-tree-pre=stdout ...
>> +@end smallexample
>> +
>> +Both of the above output the PRE dump on @file{stdout}. However, if
>> +there are multiple command line file names are applicable then the
>> +last one is used. Thus the command
>> +
>> +@smallexample
>> +gcc -O2 -fdump-tree-pre=stderr -fdump-tree-all=all.txt
>> +@end smallexample
>> +
>> +outputs all the dumps in @file{all.txt} because the stderr option for
>> +PRE dump is overridden by a later option.
>> +
>> @item all
>> -Turn on all options, except @option{raw}, @option{slim}, @option{verbose}
>> -and @option{lineno}.
>> +Turn on all options, except @option{raw}, @option{slim}, @option{verbose},
>> +@option{lineno}.
>> @end table
>>
>> The following tree dumps are possible:
>> @@ -5913,6 +5956,7 @@ is made by appending @file{.vrp} to the source fil
>> @item all
>> @opindex fdump-tree-all
>> Enable all the available tree dumps with the flags provided in this option.
>> +
>> @end table
>>
>> @item -ftree-vectorizer-verbose=@var{n}
>> Index: tree-dump.c
>> ===================================================================
>> --- tree-dump.c (revision 187265)
>> +++ tree-dump.c (working copy)
>> @@ -773,20 +773,20 @@ dump_node (const_tree t, int flags, FILE *stream)
>> tree_dump_index enumeration in tree-pass.h. */
>> static struct dump_file_info dump_files[TDI_end] =
>> {
>> - {NULL, NULL, NULL, 0, 0, 0},
>> - {".cgraph", "ipa-cgraph", NULL, TDF_IPA, 0, 0},
>> - {".tu", "translation-unit", NULL, TDF_TREE, 0, 1},
>> - {".class", "class-hierarchy", NULL, TDF_TREE, 0, 2},
>> - {".original", "tree-original", NULL, TDF_TREE, 0, 3},
>> - {".gimple", "tree-gimple", NULL, TDF_TREE, 0, 4},
>> - {".nested", "tree-nested", NULL, TDF_TREE, 0, 5},
>> - {".vcg", "tree-vcg", NULL, TDF_TREE, 0, 6},
>> - {".ads", "ada-spec", NULL, 0, 0, 7},
>> + {NULL, NULL, NULL, NULL, 0, 0, 0},
>> + {".cgraph", "ipa-cgraph", NULL, NULL, TDF_IPA, 0, 0},
>> + {".tu", "translation-unit", NULL, NULL, TDF_TREE, 0, 1},
>> + {".class", "class-hierarchy", NULL, NULL, TDF_TREE, 0, 2},
>> + {".original", "tree-original", NULL, NULL, TDF_TREE, 0, 3},
>> + {".gimple", "tree-gimple", NULL, NULL, TDF_TREE, 0, 4},
>> + {".nested", "tree-nested", NULL, NULL, TDF_TREE, 0, 5},
>> + {".vcg", "tree-vcg", NULL, NULL, TDF_TREE, 0, 6},
>> + {".ads", "ada-spec", NULL, NULL, 0, 0, 7},
>> #define FIRST_AUTO_NUMBERED_DUMP 8
>>
>> - {NULL, "tree-all", NULL, TDF_TREE, 0, 0},
>> - {NULL, "rtl-all", NULL, TDF_RTL, 0, 0},
>> - {NULL, "ipa-all", NULL, TDF_IPA, 0, 0},
>> + {NULL, "tree-all", NULL, NULL, TDF_TREE, 0, 0},
>> + {NULL, "rtl-all", NULL, NULL, TDF_RTL, 0, 0},
>> + {NULL, "ipa-all", NULL, NULL, TDF_IPA, 0, 0},
>> };
>>
>> /* Dynamically registered tree dump files and switches. */
>> @@ -802,7 +802,7 @@ struct dump_option_value_info
>> };
>>
>> /* Table of dump options. This must be consistent with the TDF_* flags
>> - in tree.h */
>> + in tree-pass.h */
>> static const struct dump_option_value_info dump_options[] =
>> {
>> {"address", TDF_ADDRESS},
>> @@ -892,6 +892,9 @@ get_dump_file_name (int phase)
>> if (dfi->state == 0)
>> return NULL;
>>
>> + if (dfi->filename)
>> + return xstrdup (dfi->filename);
>> +
>> if (dfi->num < 0)
>> dump_id[0] = '\0';
>> else
>> @@ -911,6 +914,22 @@ get_dump_file_name (int phase)
>> return concat (dump_base_name, dump_id, dfi->suffix, NULL);
>> }
>>
>> +/* If the DFI dump output corresponds to stdout or stderr stream,
>> + return that stream, NULL otherwise. */
>> +
>> +static FILE *
>> +dump_get_standard_stream (struct dump_file_info *dfi)
>> +{
>> + if (!dfi->filename)
>> + return NULL;
>> +
>> + return strcmp("stderr", dfi->filename) == 0
>> + ? stderr
>> + : strcmp("stdout", dfi->filename) == 0
>> + ? stdout
>> + : NULL;
>> +}
>> +
>> /* Begin a tree dump for PHASE. Stores any user supplied flag in
>> *FLAG_PTR and returns a stream to write to. If the dump is not
>> enabled, returns NULL.
>> @@ -926,14 +945,20 @@ dump_begin (int phase, int *flag_ptr)
>> if (phase == TDI_none || !dump_enabled_p (phase))
>> return NULL;
>>
>> - name = get_dump_file_name (phase);
>> dfi = get_dump_file_info (phase);
>> - stream = fopen (name, dfi->state < 0 ? "w" : "a");
>> - if (!stream)
>> - error ("could not open dump file %qs: %m", name);
>> + stream = dump_get_standard_stream (dfi);
>> + if (stream)
>> + dfi->state = 1;
>> else
>> - dfi->state = 1;
>> - free (name);
>> + {
>> + name = get_dump_file_name (phase);
>> + stream = fopen (name, dfi->state < 0 ? "w" : "a");
>> + if (!stream)
>> + error ("could not open dump file %qs: %m", name);
>> + else
>> + dfi->state = 1;
>> + free (name);
>> + }
>>
>> if (flag_ptr)
>> *flag_ptr = dfi->flags;
>> @@ -987,35 +1012,46 @@ dump_flag_name (int phase)
>> dump_begin. */
>>
>> void
>> -dump_end (int phase ATTRIBUTE_UNUSED, FILE *stream)
>> +dump_end (int phase, FILE *stream)
>> {
>> - fclose (stream);
>> + struct dump_file_info *dfi = get_dump_file_info (phase);
>> + if (!dump_get_standard_stream (dfi))
>> + fclose (stream);
>> }
>>
>> -/* Enable all tree dumps. Return number of enabled tree dumps. */
>> +/* Enable all tree dumps with FLAGS on FILENAME. Return number of
>> + enabled tree dumps. */
>>
>> static int
>> -dump_enable_all (int flags)
>> +dump_enable_all (int flags, const char *filename)
>> {
>> int ir_dump_type = (flags & (TDF_TREE | TDF_RTL | TDF_IPA));
>> int n = 0;
>> size_t i;
>>
>> for (i = TDI_none + 1; i < (size_t) TDI_end; i++)
>> - if ((dump_files[i].flags & ir_dump_type))
>> - {
>> - dump_files[i].state = -1;
>> - dump_files[i].flags |= flags;
>> - n++;
>> - }
>> + {
>> + if ((dump_files[i].flags & ir_dump_type))
>> + {
>> + dump_files[i].state = -1;
>> + dump_files[i].flags |= flags;
>> + n++;
>> + if (filename)
>> + dump_files[i].filename = xstrdup (filename);
>> + }
>> + }
>>
>> for (i = 0; i < extra_dump_files_in_use; i++)
>> - if ((extra_dump_files[i].flags & ir_dump_type))
>> - {
>> - extra_dump_files[i].state = -1;
>> - extra_dump_files[i].flags |= flags;
>> - n++;
>> - }
>> + {
>> + if ((extra_dump_files[i].flags & ir_dump_type))
>> + {
>> + extra_dump_files[i].state = -1;
>> + extra_dump_files[i].flags |= flags;
>> + n++;
>> + if (filename)
>> + extra_dump_files[i].filename = xstrdup (filename);
>> + }
>> + }
>>
>> return n;
>> }
>> @@ -1037,7 +1073,7 @@ dump_switch_p_1 (const char *arg, struct dump_file
>> if (!option_value)
>> return 0;
>>
>> - if (*option_value && *option_value != '-')
>> + if (*option_value && *option_value != '-' && *option_value != '=')
>> return 0;
>>
>> ptr = option_value;
>> @@ -1052,17 +1088,30 @@ dump_switch_p_1 (const char *arg, struct dump_file
>> while (*ptr == '-')
>> ptr++;
>> end_ptr = strchr (ptr, '-');
>> +
>> if (!end_ptr)
>> end_ptr = ptr + strlen (ptr);
>> length = end_ptr - ptr;
>>
>> + if (*ptr == '=')
>> + {
>> + /* Interpret rest of the argument as a dump filename. This
>> + filename overrides generated dump names as well as other
>> + command line filenames. */
>> + flags |= TDF_FILENAME;
>> + if (dfi->filename)
>> + free (dfi->filename);
>> + dfi->filename = xstrdup (ptr + 1);
>> + break;
>> + }
>> +
>> for (option_ptr = dump_options; option_ptr->name; option_ptr++)
>> if (strlen (option_ptr->name) == length
>> && !memcmp (option_ptr->name, ptr, length))
>> - {
>> - flags |= option_ptr->value;
>> + {
>> + flags |= option_ptr->value;
>> goto found;
>> - }
>> + }
>> warning (0, "ignoring unknown option %q.*s in %<-fdump-%s%>",
>> length, ptr, dfi->swtch);
>> found:;
>> @@ -1075,7 +1124,7 @@ dump_switch_p_1 (const char *arg, struct dump_file
>> /* Process -fdump-tree-all and -fdump-rtl-all, by enabling all the
>> known dumps. */
>> if (dfi->suffix == NULL)
>> - dump_enable_all (dfi->flags);
>> + dump_enable_all (dfi->flags, dfi->filename);
>>
>> return 1;
>> }
>> @@ -1124,5 +1173,5 @@ dump_function (int phase, tree fn)
>> bool
>> enable_rtl_dump_file (void)
>> {
>> - return dump_enable_all (TDF_RTL | TDF_DETAILS | TDF_BLOCKS) > 0;
>> + return dump_enable_all (TDF_RTL | TDF_DETAILS | TDF_BLOCKS, NULL) > 0;
>> }
>> Index: tree-pass.h
>> ===================================================================
>> --- tree-pass.h (revision 187265)
>> +++ tree-pass.h (working copy)
>> @@ -84,8 +84,9 @@ enum tree_dump_index
>> #define TDF_ENUMERATE_LOCALS (1 << 22) /* Enumerate locals by uid. */
>> #define TDF_CSELIB (1 << 23) /* Dump cselib details. */
>> #define TDF_SCEV (1 << 24) /* Dump SCEV details. */
>> +#define TDF_FILENAME (1 << 25) /* Dump on provided filename
>> + instead of constructing one. */
>>
>> -
>> /* In tree-dump.c */
>>
>> extern char *get_dump_file_name (int);
>> @@ -222,6 +223,8 @@ struct dump_file_info
>> const char *suffix; /* suffix to give output file. */
>> const char *swtch; /* command line switch */
>> const char *glob; /* command line glob */
>> + const char *filename; /* use this filename instead of making
>> + up one using dump_base_name + suffix. */
>> int flags; /* user flags */
>> int state; /* state of play */
>> int num; /* dump file number */
>> Index: testsuite/g++.dg/other/dump-filename-1.C
>> ===================================================================
>> --- testsuite/g++.dg/other/dump-filename-1.C (revision 0)
>> +++ testsuite/g++.dg/other/dump-filename-1.C (revision 0)
>> @@ -0,0 +1,11 @@
>> +// Test that the dump to a user-defined file works correctly.
>> +/* { dg-options "-O2 -fdump-tree-original=foobar.dump" } */
>> +
>> +void test (int *b, int *e, int stride)
>> + {
>> + for (int *p = b; p != e; p += stride)
>> + *p = 1;
>> + }
>> +
>> +/* { dg-final { scan-file foobar.dump ";; Function void test" } } */
>> +/* { dg-final { remove-build-file "foobar.dump" } } */
>>
>>
>> On Wed, May 9, 2012 at 12:22 AM, Gabriel Dos Reis
>> <[email protected]> wrote:
>>> On Wed, May 9, 2012 at 1:46 AM, Sharad Singhai <[email protected]> wrote:
>>> [...]
>>>
>>>> +@item -fdump-rtl-all=stderr
>>>> +@opindex fdump-rtl-all=stderr
>>>
>>> You do not need to have a separate index entry for '=stderr' or '=stdout'.
>>> Rather, expand the description to state this in all the documentation
>>> for -fdump-xxx=yyy.
>>>
>>> [...]
>>>
>>>> +/* Return non-zero iff the USER_FILENAME corresponds to stdout or
>>>> + stderr stream. */
>>>> +
>>>> +static int
>>>> +dump_stream_p (const char *user_filename)
>>>> +{
>>>> + if (user_filename)
>>>> + return !strncmp ("stderr", user_filename, 6) ||
>>>> + !strncmp ("stdout", user_filename, 6);
>>>> + else
>>>> + return 0;
>>>> +}
>>>
>>> The name is ambiguous.
>>> This function is testing whether its string argument designates one of
>>> the *standard* output streams. Name it to reflect that..
>>> Have it take the dump state context. Also the coding convention: the binary
>>> operator "||" should be on next line. In fact the thing could be
>>> simpler. Instead of
>>> testing over and over again against "stderr" (once in this function, then
>>> again
>>> later), just return the corresponding standard FILE* pointer.
>>> Also, this is a case of overuse of strncmp. If you name the function
>>> dump_get_standard_stream:
>>>
>>> return strcmp("stderr", dfi->user_filename) == 0
>>> ? stderr
>>> : stdcmp("stdout", dfi->use_filename)
>>> ? stdout
>>> : NULL;
>>>
>>> you can simplify:
>>>
>>>> - name = get_dump_file_name (phase);
>>>> dfi = get_dump_file_info (phase);
>>>> - stream = fopen (name, dfi->state < 0 ? "w" : "a");
>>>> - if (!stream)
>>>> - error ("could not open dump file %qs: %m", name);
>>>> + if (dump_stream_p (dfi->user_filename))
>>>> + {
>>>> + if (!strncmp ("stderr", dfi->user_filename, 6))
>>>> + stream = stderr;
>>>> + else
>>>> + if (!strncmp ("stdout", dfi->user_filename, 6))
>>>> + stream = stdout;
>>>> + else
>>>> + error ("unknown stream: %qs: %m", dfi->user_filename);
>>>> + dfi->state = 1;
>>>> + }
>>>> else
>>>> - dfi->state = 1;
>>>> - free (name);
>>>> + {
>>>> + name = get_dump_file_name (phase);
>>>> + stream = fopen (name, dfi->state < 0 ? "w" : "a");
>>>> + if (!stream)
>>>> + error ("could not open dump file %qs: %m", name);
>>>> + else
>>>> + dfi->state = 1;
>>>> + free (name);
>>>> + }
>>>>
>>>> if (flag_ptr)
>>>> *flag_ptr = dfi->flags;
>>>> @@ -987,35 +1017,45 @@ dump_flag_name (int phase)
>>>> dump_begin. */
>>>>
>>>> void
>>>> -dump_end (int phase ATTRIBUTE_UNUSED, FILE *stream)
>>>> +dump_end (int phase, FILE *stream)
>>>> {
>>>> - fclose (stream);
>>>> + struct dump_file_info *dfi = get_dump_file_info (phase);
>>>> + if (!dump_stream_p (dfi->user_filename))
>>>> + fclose (stream);
>>>> }
>>>>
>>>> /* Enable all tree dumps. Return number of enabled tree dumps. */
>>>>
>>>> static int
>>>> -dump_enable_all (int flags)
>>>> +dump_enable_all (int flags, const char *user_filename)
>>>> {
>>>> int ir_dump_type = (flags & (TDF_TREE | TDF_RTL | TDF_IPA));
>>>> int n = 0;
>>>> size_t i;
>>>>
>>>> for (i = TDI_none + 1; i < (size_t) TDI_end; i++)
>>>> - if ((dump_files[i].flags & ir_dump_type))
>>>> - {
>>>> - dump_files[i].state = -1;
>>>> - dump_files[i].flags |= flags;
>>>> - n++;
>>>> - }
>>>> + {
>>>> + if ((dump_files[i].flags & ir_dump_type))
>>>> + {
>>>> + dump_files[i].state = -1;
>>>> + dump_files[i].flags |= flags;
>>>> + n++;
>>>> + }
>>>> + if (user_filename)
>>>> + dump_files[i].user_filename = user_filename;
>>>> + }
>>>>
>>>> for (i = 0; i < extra_dump_files_in_use; i++)
>>>> - if ((extra_dump_files[i].flags & ir_dump_type))
>>>> - {
>>>> - extra_dump_files[i].state = -1;
>>>> - extra_dump_files[i].flags |= flags;
>>>> - n++;
>>>> - }
>>>> + {
>>>> + if ((extra_dump_files[i].flags & ir_dump_type))
>>>> + {
>>>> + extra_dump_files[i].state = -1;
>>>> + extra_dump_files[i].flags |= flags;
>>>> + n++;
>>>> + }
>>>> + if (user_filename)
>>>> + extra_dump_files[i].user_filename = user_filename;
>>>> + }
>>>>
>>>> return n;
>>>> }
>>>> @@ -1037,7 +1077,7 @@ dump_switch_p_1 (const char *arg, struct dump_file
>>>> if (!option_value)
>>>> return 0;
>>>>
>>>> - if (*option_value && *option_value != '-')
>>>> + if (*option_value && *option_value != '-' && *option_value != '=')
>>>> return 0;
>>>>
>>>> ptr = option_value;
>>>> @@ -1052,17 +1092,30 @@ dump_switch_p_1 (const char *arg, struct dump_file
>>>> while (*ptr == '-')
>>>> ptr++;
>>>> end_ptr = strchr (ptr, '-');
>>>> +
>>>> if (!end_ptr)
>>>> end_ptr = ptr + strlen (ptr);
>>>> length = end_ptr - ptr;
>>>>
>>>> + if (*ptr == '=')
>>>> + {
>>>> + /* Interpret rest of the argument as a dump filename. The
>>>> + user provided filename overrides generated dump names as
>>>> + well as other command line filenames. */
>>>> + flags |= TDF_USER_FILENAME;
>>>> + if (dfi->user_filename)
>>>> + free (dfi->user_filename);
>>>> + dfi->user_filename = xstrdup (ptr + 1);
>>>> + break;
>>>> + }
>>>> +
>>>> for (option_ptr = dump_options; option_ptr->name; option_ptr++)
>>>> if (strlen (option_ptr->name) == length
>>>> && !memcmp (option_ptr->name, ptr, length))
>>>> - {
>>>> - flags |= option_ptr->value;
>>>> + {
>>>> + flags |= option_ptr->value;
>>>> goto found;
>>>> - }
>>>> + }
>>>> warning (0, "ignoring unknown option %q.*s in %<-fdump-%s%>",
>>>> length, ptr, dfi->swtch);
>>>> found:;
>>>> @@ -1075,7 +1128,7 @@ dump_switch_p_1 (const char *arg, struct dump_file
>>>> /* Process -fdump-tree-all and -fdump-rtl-all, by enabling all the
>>>> known dumps. */
>>>> if (dfi->suffix == NULL)
>>>> - dump_enable_all (dfi->flags);
>>>> + dump_enable_all (dfi->flags, dfi->user_filename);
>>>>
>>>> return 1;
>>>> }
>>>> @@ -1124,5 +1177,5 @@ dump_function (int phase, tree fn)
>>>> bool
>>>> enable_rtl_dump_file (void)
>>>> {
>>>> - return dump_enable_all (TDF_RTL | TDF_DETAILS | TDF_BLOCKS) > 0;
>>>> + return dump_enable_all (TDF_RTL | TDF_DETAILS | TDF_BLOCKS, NULL) > 0;
>>>> }
>>>> Index: tree-pass.h
>>>> ===================================================================
>>>> --- tree-pass.h (revision 187265)
>>>> +++ tree-pass.h (working copy)
>>>> @@ -84,8 +84,9 @@ enum tree_dump_index
>>>> #define TDF_ENUMERATE_LOCALS (1 << 22) /* Enumerate locals by uid. */
>>>> #define TDF_CSELIB (1 << 23) /* Dump cselib details. */
>>>> #define TDF_SCEV (1 << 24) /* Dump SCEV details. */
>>>> +#define TDF_USER_FILENAME (1 << 25) /* Dump on user provided filename,
>>>> + instead of constructing one. */
>>>>
>>>> -
>>>> /* In tree-dump.c */
>>>>
>>>> extern char *get_dump_file_name (int);
>>>> @@ -222,6 +223,8 @@ struct dump_file_info
>>>> const char *suffix; /* suffix to give output file. */
>>>> const char *swtch; /* command line switch */
>>>> const char *glob; /* command line glob */
>>>> + const char *user_filename; /* user provided filename instead of
>>>> making
>>>> + up one using dump_base_name + suffix.
>>>> */
>>>
>>> There is "no user" here: we are the users :-) Just call it "filename".
>>>
>>> -- Gaby
