Hi,
> > I avoided open coding it with add and shift because it creates a 4
> > instructions (and shifts which are typically slow) dependency chain
> > instead of a load and multiply. This change, unless the target is
> > known to optimize it further is unlikely to be beneficial. And by the
> > time we get to costing the only alternative is to undo the existing pattern
> > and
> so you lose the general shift optimization.
> >
> > So it seemed unwise to open code as shifts, given the codegen out of
> > the vectorizer would be degenerate for most targets or one needs the
> > more complicated route of costing during pattern matching already.
>
> Hmm, OK. That seems like a cost-model thing though, rather than something
> that should be exposed through optabs. And I imagine the open-coded
> version would still be better than nothing on targets without highpart
> multiply.
>
> So how about replacing the hook with one that simply asks whether division
> through highpart multiplication is preferred over the add/shift sequence?
> (Unfortunately it's not going to be possible to work that out from existing
> information.)
So this doesn't work for SVE. For SVE the multiplication widening pass
introduces
FMAs at gimple level. So in the cases where the operation is fed from a
widening
multiplication we end up generating FMA. If that was it I could have matched
FMA.
But it also pushes the multiplication in the second operand because it no
longer has
a mul to share the results with.
In any case, the gimple code is transformed into
vect__3.8_122 = .MASK_LOAD (_29, 8B, loop_mask_121);
vect_patt_57.9_123 = (vector([8,8]) unsigned short) vect__3.8_122;
vect_patt_64.11_127 = .FMA (vect_patt_57.9_123, vect_cst__124, { 257, ... });
vect_patt_65.12_128 = vect_patt_64.11_127 >> 8;
vect_patt_66.13_129 = .FMA (vect_patt_57.9_123, vect_cst__124,
vect_patt_65.12_128);
vect_patt_62.14_130 = vect_patt_66.13_129 >> 8;
vect_patt_68.15_131 = (vector([8,8]) unsigned charD.21) vect_patt_62.14_130;
This transformation is much worse than the original code, it extended the
dependency
chain with another expensive instruction. I can try to correct this in RTL by
matching
FMA and shift and splitting into MUL + ADDHNB and hope CSE takes care of the
extra mul.
But this seems like a hack, and it's basically undoing the earlier
transformation. It seems to
me that the open coding is a bad idea.
Do you still want it Richard?
Thanks,
Tamar
>
> Thanks,
> Richard
>
> >
> >>
> >> Some comments in addition to Richard's:
> >>
> >> Tamar Christina via Gcc-patches <gcc-patches@gcc.gnu.org> writes:
> >> > Hi All,
> >> >
> >> > As discussed in the ticket, this replaces the approach for
> >> > optimizing the div by bitmask operation from a hook into optabs
> >> > implemented through add_highpart.
> >> >
> >> > In order to be able to use this we need to check whether the
> >> > current precision has enough bits to do the operation without any
> >> > of the additions
> >> overflowing.
> >> >
> >> > We use range information to determine this and only do the
> >> > operation if we're sure am overflow won't occur.
> >> >
> >> > Bootstrapped Regtested on aarch64-none-linux-gnu and <on-going>
> >> issues.
> >> >
> >> > Ok for master?
> >> >
> >> > Thanks,
> >> > Tamar
> >> >
> >> > gcc/ChangeLog:
> >> >
> >> > PR target/108583
> >> > * doc/tm.texi (TARGET_VECTORIZE_CAN_SPECIAL_DIV_BY_CONST):
> >> Remove.
> >> > * doc/tm.texi.in: Likewise.
> >> > * explow.cc (round_push, align_dynamic_address): Revert previous
> >> patch.
> >> > * expmed.cc (expand_divmod): Likewise.
> >> > * expmed.h (expand_divmod): Likewise.
> >> > * expr.cc (force_operand, expand_expr_divmod): Likewise.
> >> > * optabs.cc (expand_doubleword_mod,
> >> expand_doubleword_divmod): Likewise.
> >> > * internal-fn.def (ADDH): New.
> >> > * optabs.def (sadd_highpart_optab, uadd_highpart_optab): New.
> >> > * doc/md.texi: Document them.
> >> > * doc/rtl.texi: Likewise.
> >> > * target.def (can_special_div_by_const): Remove.
> >> > * target.h: Remove tree-core.h include
> >> > * targhooks.cc (default_can_special_div_by_const): Remove.
> >> > * targhooks.h (default_can_special_div_by_const): Remove.
> >> > * tree-vect-generic.cc (expand_vector_operation): Remove hook.
> >> > * tree-vect-patterns.cc (vect_recog_divmod_pattern): Remove hook
> >> and
> >> > implement new obtab recognition based on range.
> >> > * tree-vect-stmts.cc (vectorizable_operation): Remove hook.
> >> >
> >> > gcc/testsuite/ChangeLog:
> >> >
> >> > PR target/108583
> >> > * gcc.dg/vect/vect-div-bitmask-4.c: New test.
> >> > * gcc.dg/vect/vect-div-bitmask-5.c: New test.
> >> >
> >> > --- inline copy of patch --
> >> > diff --git a/gcc/doc/md.texi b/gcc/doc/md.texi index
> >> >
> >>
> 7235d34c4b30949febfa10d5a626ac9358281cfa..02004c4b0f4d88dffe980f
> 74080
> >> 3
> >> > 8595e21af35d 100644
> >> > --- a/gcc/doc/md.texi
> >> > +++ b/gcc/doc/md.texi
> >> > @@ -5668,6 +5668,18 @@ represented in RTL using a
> >> @code{smul_highpart} RTX expression.
> >> > Similar, but the multiplication is unsigned. This may be
> >> > represented in RTL using an @code{umul_highpart} RTX expression.
> >> >
> >> > +@cindex @code{sadd@var{m}3_highpart} instruction pattern @item
> >> > +@samp{smul@var{m}3_highpart}
> >>
> >> sadd
> >>
> >> > +Perform a signed addition of operands 1 and 2, which have mode
> >> > +@var{m}, and store the most significant half of the product in operand
> 0.
> >> > +The least significant half of the product is discarded. This may
> >> > +be represented in RTL using a @code{sadd_highpart} RTX expression.
> >> > +
> >> > +@cindex @code{uadd@var{m}3_highpart} instruction pattern @item
> >> > +@samp{uadd@var{m}3_highpart} Similar, but the addition is unsigned.
> >> > +This may be represented in RTL using an @code{uadd_highpart} RTX
> >> > +expression.
> >> > +
> >> > @cindex @code{madd@var{m}@var{n}4} instruction pattern @item
> >> > @samp{madd@var{m}@var{n}4} Multiply operands 1 and 2, sign-
> extend
> >> > them to mode @var{n}, add diff --git a/gcc/doc/rtl.texi
> >> > b/gcc/doc/rtl.texi index
> >> >
> >>
> d1380e1eb3ba6b2853686f41f2bf937bfcbed1fe..63a7ef6e566eeea4f14c00
> 343
> >> d17
> >> > 1940ec4222f3 100644
> >> > --- a/gcc/doc/rtl.texi
> >> > +++ b/gcc/doc/rtl.texi
> >> > @@ -2535,6 +2535,17 @@ out in machine mode @var{m}.
> >> > @code{smul_highpart} returns the high part of a signed
> >> > multiplication, @code{umul_highpart} returns the high part of an
> >> > unsigned
> >> multiplication.
> >> >
> >> > +@findex sadd_highpart
> >> > +@findex uadd_highpart
> >> > +@cindex high-part addition
> >> > +@cindex addition high part
> >> > +@item (sadd_highpart:@var{m} @var{x} @var{y}) @itemx
> >> > +(uadd_highpart:@var{m} @var{x} @var{y}) Represents the high-part
> >> > +addition of @var{x} and @var{y} carried out in machine mode @var{m}.
> >> > +@code{sadd_highpart} returns the high part of a signed addition,
> >> > +@code{uadd_highpart} returns the high part of an unsigned addition.
> >>
> >> The patch doesn't add these RTL codes though.
> >>
> >> > +
> >> > @findex fma
> >> > @cindex fused multiply-add
> >> > @item (fma:@var{m} @var{x} @var{y} @var{z}) diff --git
> >> > a/gcc/doc/tm.texi b/gcc/doc/tm.texi index
> >> >
> >>
> c6c891972d1e58cd163b259ba96a599d62326865..3ab2031a336b8758d57
> 914840
> >> 17e
> >> > 6b0d62ab077e 100644
> >> > --- a/gcc/doc/tm.texi
> >> > +++ b/gcc/doc/tm.texi
> >> > @@ -6137,22 +6137,6 @@ instruction pattern. There is no need for
> >> > the hook to handle these two implementation approaches itself.
> >> > @end deftypefn
> >> >
> >> > -@deftypefn {Target Hook} bool
> >> > TARGET_VECTORIZE_CAN_SPECIAL_DIV_BY_CONST (enum
> >> @var{tree_code}, tree
> >> > @var{vectype}, wide_int @var{constant}, rtx *@var{output}, rtx
> >> > @var{in0}, rtx @var{in1}) -This hook is used to test whether the
> >> > target has a special method of -division of vectors of type
> >> > @var{vectype}
> >> using the value @var{constant}, -and producing a vector of type
> >> @var{vectype}. The division -will then not be decomposed by the
> >> vectorizer and kept as a div.
> >> > -
> >> > -When the hook is being used to test whether the target supports a
> >> > special -divide, @var{in0}, @var{in1}, and @var{output} are all null.
> >> > When the hook -is being used to emit a division, @var{in0} and
> >> > @var{in1} are the source -vectors of type @var{vecttype} and
> >> > @var{output} is the destination vector of -type @var{vectype}.
> >> > -
> >> > -Return true if the operation is possible, emitting instructions
> >> > for it -if rtxes are provided and updating @var{output}.
> >> > -@end deftypefn
> >> > -
> >> > @deftypefn {Target Hook} tree
> >> > TARGET_VECTORIZE_BUILTIN_VECTORIZED_FUNCTION (unsigned
> >> @var{code},
> >> > tree @var{vec_type_out}, tree @var{vec_type_in}) This hook should
> >> > return the decl of a function that implements the vectorized
> >> > variant of the function with the @code{combined_fn} code diff --git
> >> > a/gcc/doc/tm.texi.in b/gcc/doc/tm.texi.in index
> >> >
> >>
> 613b2534149415f442163d599503efaf423b673b..8790f4e44b98b51ad5d
> 1efec0
> >> a3a
> >> > bccd1c293c7b 100644
> >> > --- a/gcc/doc/tm.texi.in
> >> > +++ b/gcc/doc/tm.texi.in
> >> > @@ -4173,8 +4173,6 @@ address; but often a machine-dependent
> >> strategy can generate better code.
> >> >
> >> > @hook TARGET_VECTORIZE_VEC_PERM_CONST
> >> >
> >> > -@hook TARGET_VECTORIZE_CAN_SPECIAL_DIV_BY_CONST
> >> > -
> >> > @hook TARGET_VECTORIZE_BUILTIN_VECTORIZED_FUNCTION
> >> >
> >> > @hook TARGET_VECTORIZE_BUILTIN_MD_VECTORIZED_FUNCTION
> >> > diff --git a/gcc/explow.cc b/gcc/explow.cc index
> >> >
> >>
> 83439b32abe1b9aa4b7983eb629804f97486acbd..be9195b33323ee5597fc
> 212f0
> >> bef
> >> > a016eea4573c 100644
> >> > --- a/gcc/explow.cc
> >> > +++ b/gcc/explow.cc
> >> > @@ -1037,7 +1037,7 @@ round_push (rtx size)
> >> > TRUNC_DIV_EXPR. */
> >> > size = expand_binop (Pmode, add_optab, size, alignm1_rtx,
> >> > NULL_RTX, 1, OPTAB_LIB_WIDEN);
> >> > - size = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, NULL, NULL,
> >> > size, align_rtx,
> >> > + size = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, size, align_rtx,
> >> > NULL_RTX, 1);
> >> > size = expand_mult (Pmode, size, align_rtx, NULL_RTX, 1);
> >> >
> >> > @@ -1203,7 +1203,7 @@ align_dynamic_address (rtx target, unsigned
> >> required_align)
> >> > gen_int_mode (required_align / BITS_PER_UNIT -
> >> > 1,
> >> > Pmode),
> >> > NULL_RTX, 1, OPTAB_LIB_WIDEN);
> >> > - target = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, NULL, NULL,
> >> > target,
> >> > + target = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, target,
> >> > gen_int_mode (required_align / BITS_PER_UNIT,
> >> > Pmode),
> >> > NULL_RTX, 1);
> >> > diff --git a/gcc/expmed.h b/gcc/expmed.h index
> >> >
> >>
> 0419e2dac85850889ce0bee59515e31a80c582de..4dfe635c22ee49f2dba4c
> 5364
> >> 094
> >> > 1628068f3901 100644
> >> > --- a/gcc/expmed.h
> >> > +++ b/gcc/expmed.h
> >> > @@ -710,9 +710,8 @@ extern rtx expand_shift (enum tree_code,
> >> > machine_mode, rtx, poly_int64, rtx, extern rtx maybe_expand_shift
> >> (enum tree_code, machine_mode, rtx, int, rtx,
> >> > int);
> >> > #ifdef GCC_OPTABS_H
> >> > -extern rtx expand_divmod (int, enum tree_code, machine_mode, tree,
> >> tree,
> >> > - rtx, rtx, rtx, int,
> >> > - enum optab_methods = OPTAB_LIB_WIDEN);
> >> > +extern rtx expand_divmod (int, enum tree_code, machine_mode, rtx,
> >> rtx,
> >> > + rtx, int, enum optab_methods =
> >> OPTAB_LIB_WIDEN);
> >> > #endif
> >> > #endif
> >> >
> >> > diff --git a/gcc/expmed.cc b/gcc/expmed.cc index
> >> >
> >>
> 917360199ca56157cf3c3693b65e93cd9d8ed244..1553ea8e31eb6433025a
> b18a3
> >> a59
> >> > c169d3b7692f 100644
> >> > --- a/gcc/expmed.cc
> >> > +++ b/gcc/expmed.cc
> >> > @@ -4222,8 +4222,8 @@ expand_sdiv_pow2 (scalar_int_mode mode,
> rtx
> >> op0,
> >> > HOST_WIDE_INT d)
> >> >
> >> > rtx
> >> > expand_divmod (int rem_flag, enum tree_code code, machine_mode
> >> mode,
> >> > - tree treeop0, tree treeop1, rtx op0, rtx op1, rtx target,
> >> > - int unsignedp, enum optab_methods methods)
> >> > + rtx op0, rtx op1, rtx target, int unsignedp,
> >> > + enum optab_methods methods)
> >> > {
> >> > machine_mode compute_mode;
> >> > rtx tquotient;
> >> > @@ -4375,17 +4375,6 @@ expand_divmod (int rem_flag, enum
> tree_code
> >> > code, machine_mode mode,
> >> >
> >> > last_div_const = ! rem_flag && op1_is_constant ? INTVAL (op1) :
> >> > 0;
> >> >
> >> > - /* Check if the target has specific expansions for the division.
> >> > */
> >> > - tree cst;
> >> > - if (treeop0
> >> > - && treeop1
> >> > - && (cst = uniform_integer_cst_p (treeop1))
> >> > - && targetm.vectorize.can_special_div_by_const (code, TREE_TYPE
> >> (treeop0),
> >> > - wi::to_wide (cst),
> >> > - &target, op0, op1))
> >> > - return target;
> >> > -
> >> > -
> >> > /* Now convert to the best mode to use. */
> >> > if (compute_mode != mode)
> >> > {
> >> > @@ -4629,8 +4618,8 @@ expand_divmod (int rem_flag, enum
> tree_code
> >> code, machine_mode mode,
> >> > || (optab_handler (sdivmod_optab, int_mode)
> >> > != CODE_FOR_nothing)))
> >> > quotient = expand_divmod (0, TRUNC_DIV_EXPR,
> >> > - int_mode, treeop0,
> >> > treeop1,
> >> > - op0, gen_int_mode
> >> > (abs_d,
> >> > + int_mode, op0,
> >> > + gen_int_mode (abs_d,
> >> > int_mode),
> >> > NULL_RTX, 0);
> >> > else
> >> > @@ -4819,8 +4808,8 @@ expand_divmod (int rem_flag, enum
> tree_code
> >> code, machine_mode mode,
> >> > size - 1, NULL_RTX, 0);
> >> > t3 = force_operand (gen_rtx_MINUS (int_mode, t1, nsign),
> >> > NULL_RTX);
> >> > - t4 = expand_divmod (0, TRUNC_DIV_EXPR, int_mode,
> >> treeop0,
> >> > - treeop1, t3, op1, NULL_RTX, 0);
> >> > + t4 = expand_divmod (0, TRUNC_DIV_EXPR, int_mode, t3,
> >> op1,
> >> > + NULL_RTX, 0);
> >> > if (t4)
> >> > {
> >> > rtx t5;
> >> > diff --git a/gcc/expr.cc b/gcc/expr.cc index
> >> >
> >>
> 15be1c8db999103bb9e5fa33daa44ae06de5ace8..78d35297e75521633907
> 8d5b
> >> 2280
> >> > c6e277f26d72 100644
> >> > --- a/gcc/expr.cc
> >> > +++ b/gcc/expr.cc
> >> > @@ -8207,17 +8207,16 @@ force_operand (rtx value, rtx target)
> >> > return expand_divmod (0,
> >> > FLOAT_MODE_P (GET_MODE (value))
> >> > ? RDIV_EXPR : TRUNC_DIV_EXPR,
> >> > - GET_MODE (value), NULL, NULL, op1,
> >> > op2,
> >> > - target, 0);
> >> > + GET_MODE (value), op1, op2, target,
> >> > 0);
> >> > case MOD:
> >> > - return expand_divmod (1, TRUNC_MOD_EXPR, GET_MODE (value),
> >> NULL, NULL,
> >> > - op1, op2, target, 0);
> >> > + return expand_divmod (1, TRUNC_MOD_EXPR, GET_MODE (value),
> >> op1, op2,
> >> > + target, 0);
> >> > case UDIV:
> >> > - return expand_divmod (0, TRUNC_DIV_EXPR, GET_MODE (value),
> >> NULL, NULL,
> >> > - op1, op2, target, 1);
> >> > + return expand_divmod (0, TRUNC_DIV_EXPR, GET_MODE (value),
> >> op1, op2,
> >> > + target, 1);
> >> > case UMOD:
> >> > - return expand_divmod (1, TRUNC_MOD_EXPR, GET_MODE (value),
> >> NULL, NULL,
> >> > - op1, op2, target, 1);
> >> > + return expand_divmod (1, TRUNC_MOD_EXPR, GET_MODE (value),
> >> op1, op2,
> >> > + target, 1);
> >> > case ASHIFTRT:
> >> > return expand_simple_binop (GET_MODE (value), code, op1, op2,
> >> > target, 0, OPTAB_LIB_WIDEN); @@ -
> >> 9170,13 +9169,11 @@
> >> > expand_expr_divmod (tree_code code, machine_mode mode, tree
> >> treeop0,
> >> > bool speed_p = optimize_insn_for_speed_p ();
> >> > do_pending_stack_adjust ();
> >> > start_sequence ();
> >> > - rtx uns_ret = expand_divmod (mod_p, code, mode, treeop0, treeop1,
> >> > - op0, op1, target, 1);
> >> > + rtx uns_ret = expand_divmod (mod_p, code, mode, op0, op1,
> >> > + target, 1);
> >> > rtx_insn *uns_insns = get_insns ();
> >> > end_sequence ();
> >> > start_sequence ();
> >> > - rtx sgn_ret = expand_divmod (mod_p, code, mode, treeop0, treeop1,
> >> > - op0, op1, target, 0);
> >> > + rtx sgn_ret = expand_divmod (mod_p, code, mode, op0, op1,
> >> > + target, 0);
> >> > rtx_insn *sgn_insns = get_insns ();
> >> > end_sequence ();
> >> > unsigned uns_cost = seq_cost (uns_insns, speed_p); @@
> >> > -9198,8
> >> > +9195,7 @@ expand_expr_divmod (tree_code code, machine_mode
> >> mode, tree treeop0,
> >> > emit_insn (sgn_insns);
> >> > return sgn_ret;
> >> > }
> >> > - return expand_divmod (mod_p, code, mode, treeop0, treeop1,
> >> > - op0, op1, target, unsignedp);
> >> > + return expand_divmod (mod_p, code, mode, op0, op1, target,
> >> > + unsignedp);
> >> > }
> >> >
> >> > rtx
> >> > diff --git a/gcc/internal-fn.def b/gcc/internal-fn.def index
> >> >
> >>
> 22b4a2d92967076c658965afcaeaf39b449a8caf..2796d3669a0806538052
> 584f5a
> >> 3b
> >> > 8a734baa800f 100644
> >> > --- a/gcc/internal-fn.def
> >> > +++ b/gcc/internal-fn.def
> >> > @@ -174,6 +174,8 @@ DEF_INTERNAL_SIGNED_OPTAB_FN (AVG_CEIL,
> >> ECF_CONST
> >> > | ECF_NOTHROW, first,
> >> >
> >> > DEF_INTERNAL_SIGNED_OPTAB_FN (MULH, ECF_CONST |
> >> ECF_NOTHROW, first,
> >> > smul_highpart, umul_highpart, binary)
> >> > +DEF_INTERNAL_SIGNED_OPTAB_FN (ADDH, ECF_CONST |
> >> ECF_NOTHROW, first,
> >> > + sadd_highpart, uadd_highpart, binary)
> >> > DEF_INTERNAL_SIGNED_OPTAB_FN (MULHS, ECF_CONST |
> >> ECF_NOTHROW, first,
> >> > smulhs, umulhs, binary)
> >> > DEF_INTERNAL_SIGNED_OPTAB_FN (MULHRS, ECF_CONST |
> >> ECF_NOTHROW, first,
> >> > diff --git a/gcc/optabs.cc b/gcc/optabs.cc index
> >> >
> >>
> cf22bfec3f5513f56d22c866231edbf322ff6945..474ccbd7915b4f144cebe03
> 69a6
> >> e
> >> > 77082c1e617b 100644
> >> > --- a/gcc/optabs.cc
> >> > +++ b/gcc/optabs.cc
> >> > @@ -1106,9 +1106,8 @@ expand_doubleword_mod (machine_mode
> >> mode, rtx op0, rtx op1, bool unsignedp)
> >> > return NULL_RTX;
> >> > }
> >> > }
> >> > - rtx remainder = expand_divmod (1, TRUNC_MOD_EXPR, word_mode,
> >> NULL, NULL,
> >> > - sum, gen_int_mode (INTVAL (op1),
> >> > - word_mode),
> >> > + rtx remainder = expand_divmod (1, TRUNC_MOD_EXPR,
> word_mode,
> >> sum,
> >> > + gen_int_mode (INTVAL (op1),
> >> word_mode),
> >> > NULL_RTX, 1, OPTAB_DIRECT);
> >> > if (remainder == NULL_RTX)
> >> > return NULL_RTX;
> >> > @@ -1211,8 +1210,8 @@ expand_doubleword_divmod (machine_mode
> >> mode, rtx
> >> > op0, rtx op1, rtx *rem,
> >> >
> >> > if (op11 != const1_rtx)
> >> > {
> >> > - rtx rem2 = expand_divmod (1, TRUNC_MOD_EXPR, mode, NULL,
> NULL,
> >> quot1,
> >> > - op11, NULL_RTX, unsignedp,
> >> OPTAB_DIRECT);
> >> > + rtx rem2 = expand_divmod (1, TRUNC_MOD_EXPR, mode, quot1,
> >> op11,
> >> > + NULL_RTX, unsignedp, OPTAB_DIRECT);
> >> > if (rem2 == NULL_RTX)
> >> > return NULL_RTX;
> >> >
> >> > @@ -1226,8 +1225,8 @@ expand_doubleword_divmod (machine_mode
> >> mode, rtx op0, rtx op1, rtx *rem,
> >> > if (rem2 == NULL_RTX)
> >> > return NULL_RTX;
> >> >
> >> > - rtx quot2 = expand_divmod (0, TRUNC_DIV_EXPR, mode, NULL,
> NULL,
> >> quot1,
> >> > - op11, NULL_RTX, unsignedp,
> >> OPTAB_DIRECT);
> >> > + rtx quot2 = expand_divmod (0, TRUNC_DIV_EXPR, mode, quot1,
> op11,
> >> > + NULL_RTX, unsignedp, OPTAB_DIRECT);
> >> > if (quot2 == NULL_RTX)
> >> > return NULL_RTX;
> >> >
> >> > diff --git a/gcc/optabs.def b/gcc/optabs.def index
> >> >
> >>
> 695f5911b300c9ca5737de9be809fa01aabe5e01..77a152ec2d1949deca2c2
> d7a5
> >> ccb
> >> > f6147947351a 100644
> >> > --- a/gcc/optabs.def
> >> > +++ b/gcc/optabs.def
> >> > @@ -265,6 +265,8 @@ OPTAB_D (spaceship_optab, "spaceship$a3")
> >> >
> >> > OPTAB_D (smul_highpart_optab, "smul$a3_highpart") OPTAB_D
> >> > (umul_highpart_optab, "umul$a3_highpart")
> >> > +OPTAB_D (sadd_highpart_optab, "sadd$a3_highpart") OPTAB_D
> >> > +(uadd_highpart_optab, "uadd$a3_highpart")
> >> >
> >> > OPTAB_D (cmpmem_optab, "cmpmem$a") OPTAB_D (cmpstr_optab,
> >> > "cmpstr$a") diff --git a/gcc/target.def b/gcc/target.def index
> >> >
> >>
> db8af0cbe81624513f114fc9bbd8be61d855f409..e0a5c7adbd962f5d08ed0
> 8d1d
> >> 81a
> >> > fa2c2baa64a5 100644
> >> > --- a/gcc/target.def
> >> > +++ b/gcc/target.def
> >> > @@ -1905,25 +1905,6 @@ implementation approaches itself.",
> >> > const vec_perm_indices &sel),
> >> > NULL)
> >> >
> >> > -DEFHOOK
> >> > -(can_special_div_by_const,
> >> > - "This hook is used to test whether the target has a special
> >> > method of\n\ -division of vectors of type @var{vectype} using the
> >> > value @var{constant},\n\ -and producing a vector of type
> >> > @var{vectype}. The division\n\ -will then not be decomposed by the
> >> > vectorizer and kept as a div.\n\ -\n\ -When the hook is being used
> >> > to test whether the target supports a special\n\ -divide,
> >> > @var{in0}, @var{in1}, and @var{output} are all null. When the
> >> > hook\n\ -is being used to emit a division, @var{in0} and @var{in1}
> >> > are the source\n\ -vectors of type @var{vecttype} and @var{output}
> >> > is the destination vector of\n\ -type @var{vectype}.\n\ -\n\
> >> > -Return true if the operation is possible, emitting instructions
> >> > for it\n\ -if rtxes are provided and updating @var{output}.",
> >> > - bool, (enum tree_code, tree vectype, wide_int constant, rtx *output,
> >> > - rtx in0, rtx in1),
> >> > - default_can_special_div_by_const)
> >> > -
> >> > /* Return true if the target supports misaligned store/load of a
> >> > specific factor denoted in the third parameter. The last parameter
> >> > is true if the access is defined in a packed struct. */ diff
> >> > --git a/gcc/target.h b/gcc/target.h index
> >> >
> >>
> 03fd03a52075b4836159035ec14078c0aebdd7e9..93691882757232c514fc
> a82b9
> >> 9f9
> >> > 13158c2d47b1 100644
> >> > --- a/gcc/target.h
> >> > +++ b/gcc/target.h
> >> > @@ -51,7 +51,6 @@
> >> > #include "insn-codes.h"
> >> > #include "tm.h"
> >> > #include "hard-reg-set.h"
> >> > -#include "tree-core.h"
> >> >
> >> > #if CHECKING_P
> >> >
> >> > diff --git a/gcc/targhooks.h b/gcc/targhooks.h index
> >> >
> >>
> a1df260f5483dc84f18d8f12c5202484a32d5bb7..a6a4809ca91baa5d7fad2
> 24454
> >> 93
> >> > 17a31390f0c2 100644
> >> > --- a/gcc/targhooks.h
> >> > +++ b/gcc/targhooks.h
> >> > @@ -209,8 +209,6 @@ extern void default_addr_space_diagnose_usage
> >> > (addr_space_t, location_t); extern rtx default_addr_space_convert
> >> > (rtx, tree, tree); extern unsigned int
> >> > default_case_values_threshold (void); extern bool
> >> > default_have_conditional_execution (void); -extern bool
> >> > default_can_special_div_by_const (enum tree_code, tree,
> >> wide_int,
> >> > - rtx *, rtx, rtx);
> >> >
> >> > extern bool default_libc_has_function (enum function_class, tree);
> >> > extern bool default_libc_has_fast_function (int fcode); diff --git
> >> > a/gcc/targhooks.cc b/gcc/targhooks.cc index
> >> >
> >>
> fe0116521feaf32187e7bc113bf93b1805852c79..211525720a620d6f533e2
> da91e
> >> 03
> >> > 877337a931e7 100644
> >> > --- a/gcc/targhooks.cc
> >> > +++ b/gcc/targhooks.cc
> >> > @@ -1840,14 +1840,6 @@ default_have_conditional_execution (void)
> >> > return HAVE_conditional_execution; }
> >> >
> >> > -/* Default that no division by constant operations are special.
> >> > */ -bool -default_can_special_div_by_const (enum tree_code, tree,
> >> > wide_int, rtx *, rtx,
> >> > - rtx)
> >> > -{
> >> > - return false;
> >> > -}
> >> > -
> >> > /* By default we assume that c99 functions are present at the runtime,
> >> > but sincos is not. */
> >> > bool
> >> > diff --git a/gcc/testsuite/gcc.dg/vect/vect-div-bitmask-4.c
> >> > b/gcc/testsuite/gcc.dg/vect/vect-div-bitmask-4.c
> >> > new file mode 100644
> >> > index
> >> >
> >>
> 0000000000000000000000000000000000000000..c81f8946922250234b
> f759e0a0
> >> a0
> >> > 4ea8c1f73e3c
> >> > --- /dev/null
> >> > +++ b/gcc/testsuite/gcc.dg/vect/vect-div-bitmask-4.c
> >> > @@ -0,0 +1,25 @@
> >> > +/* { dg-require-effective-target vect_int } */
> >> > +
> >> > +#include <stdint.h>
> >> > +#include "tree-vect.h"
> >> > +
> >> > +typedef unsigned __attribute__((__vector_size__ (16))) V;
> >> > +
> >> > +static __attribute__((__noinline__)) __attribute__((__noclone__))
> >> > +V foo (V v, unsigned short i) {
> >> > + v /= i;
> >> > + return v;
> >> > +}
> >> > +
> >> > +int
> >> > +main (void)
> >> > +{
> >> > + V v = foo ((V) { 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff
> >> > +}, 0xffff);
> >> > + for (unsigned i = 0; i < sizeof (v) / sizeof (v[0]); i++)
> >> > + if (v[i] != 0x00010001)
> >> > + __builtin_abort ();
> >> > + return 0;
> >> > +}
> >> > +
> >> > +/* { dg-final { scan-tree-dump-not "vect_recog_divmod_pattern:
> >> > +detected" "vect" { target aarch64*-*-* } } } */
> >> > diff --git a/gcc/testsuite/gcc.dg/vect/vect-div-bitmask-5.c
> >> > b/gcc/testsuite/gcc.dg/vect/vect-div-bitmask-5.c
> >> > new file mode 100644
> >> > index
> >> >
> >>
> 0000000000000000000000000000000000000000..b4eb1a4dacba481e63
> 06b4991
> >> 4d2
> >> > a29b933de625
> >> > --- /dev/null
> >> > +++ b/gcc/testsuite/gcc.dg/vect/vect-div-bitmask-5.c
> >> > @@ -0,0 +1,58 @@
> >> > +/* { dg-require-effective-target vect_int } */
> >> > +
> >> > +#include <stdint.h>
> >> > +#include <stdio.h>
> >> > +#include "tree-vect.h"
> >> > +
> >> > +#define N 50
> >> > +#define TYPE uint8_t
> >> > +
> >> > +#ifndef DEBUG
> >> > +#define DEBUG 0
> >> > +#endif
> >> > +
> >> > +#define BASE ((TYPE) -1 < 0 ? -126 : 4)
> >> > +
> >> > +
> >> > +__attribute__((noipa, noinline, optimize("O1"))) void fun1(TYPE*
> >> > +restrict pixel, TYPE level, int n) {
> >> > + for (int i = 0; i < n; i+=1)
> >> > + pixel[i] = (pixel[i] + level) / 0xff; }
> >> > +
> >> > +__attribute__((noipa, noinline, optimize("O3"))) void fun2(TYPE*
> >> > +restrict pixel, TYPE level, int n) {
> >> > + for (int i = 0; i < n; i+=1)
> >> > + pixel[i] = (pixel[i] + level) / 0xff; }
> >> > +
> >> > +int main ()
> >> > +{
> >> > + TYPE a[N];
> >> > + TYPE b[N];
> >> > +
> >> > + for (int i = 0; i < N; ++i)
> >> > + {
> >> > + a[i] = BASE + i * 13;
> >> > + b[i] = BASE + i * 13;
> >> > + if (DEBUG)
> >> > + printf ("%d: 0x%x\n", i, a[i]);
> >> > + }
> >> > +
> >> > + fun1 (a, N / 2, N);
> >> > + fun2 (b, N / 2, N);
> >> > +
> >> > + for (int i = 0; i < N; ++i)
> >> > + {
> >> > + if (DEBUG)
> >> > + printf ("%d = 0x%x == 0x%x\n", i, a[i], b[i]);
> >> > +
> >> > + if (a[i] != b[i])
> >> > + __builtin_abort ();
> >> > + }
> >> > + return 0;
> >> > +}
> >> > +
> >> > +/* { dg-final { scan-tree-dump "divmod pattern recognized" "vect"
> >> > +{ target aarch64*-*-* } } } */
> >> > diff --git a/gcc/tree-vect-generic.cc b/gcc/tree-vect-generic.cc
> >> > index
> >> >
> >>
> 166a248f4b9512d4c6fc8d760b458b7a467f7790..519a824ec727d4d4f28c
> 14077d
> >> c3
> >> > e970bed75ef6 100644
> >> > --- a/gcc/tree-vect-generic.cc
> >> > +++ b/gcc/tree-vect-generic.cc
> >> > @@ -1237,17 +1237,6 @@ expand_vector_operation
> >> (gimple_stmt_iterator *gsi, tree type, tree compute_type
> >> > tree rhs2 = gimple_assign_rhs2 (assign);
> >> > tree ret;
> >> >
> >> > - /* Check if the target was going to handle it through the
> >> > special
> >> > - division callback hook. */
> >> > - tree cst = uniform_integer_cst_p (rhs2);
> >> > - if (cst &&
> >> > - targetm.vectorize.can_special_div_by_const (code, type,
> >> > - wi::to_wide
> >> > (cst),
> >> > - NULL,
> >> > - NULL_RTX,
> >> NULL_RTX))
> >> > - return NULL_TREE;
> >> > -
> >> > -
> >> > if (!optimize
> >> > || !VECTOR_INTEGER_TYPE_P (type)
> >> > || TREE_CODE (rhs2) != VECTOR_CST diff --git
> >> > a/gcc/tree-vect-patterns.cc b/gcc/tree-vect-patterns.cc index
> >> >
> >>
> 6934aebc69f231af24668f0a1c3d140e97f55487..e39d7e6b362ef44eb2fc46
> 7f33
> >> 69
> >> > de2afea139d6 100644
> >> > --- a/gcc/tree-vect-patterns.cc
> >> > +++ b/gcc/tree-vect-patterns.cc
> >> > @@ -3914,12 +3914,82 @@ vect_recog_divmod_pattern (vec_info
> *vinfo,
> >> > return pattern_stmt;
> >> > }
> >> > else if ((cst = uniform_integer_cst_p (oprnd1))
> >> > - && targetm.vectorize.can_special_div_by_const (rhs_code,
> >> vectype,
> >> > - wi::to_wide
> >> > (cst),
> >> > - NULL,
> >> > NULL_RTX,
> >> > - NULL_RTX))
> >> > + && TYPE_UNSIGNED (itype)
> >> > + && rhs_code == TRUNC_DIV_EXPR
> >> > + && vectype
> >> > + && direct_internal_fn_supported_p (IFN_ADDH, vectype,
> >> > + OPTIMIZE_FOR_SPEED))
> >> > {
> >> > - return NULL;
> >> > + /* div optimizations using narrowings
> >> > + we can do the division e.g. shorts by 255 faster by calculating
> >> > it as
> >> > + (x + ((x + 257) >> 8)) >> 8 assuming the operation is done in
> >> > + double the precision of x.
> >> > +
> >> > + If we imagine a short as being composed of two blocks of bytes
> >> > then
> >> > + adding 257 or 0b0000_0001_0000_0001 to the number is
> equivalent to
> >> > + adding 1 to each sub component:
> >> > +
> >> > + short value of 16-bits
> >> > + ┌──────────────┬────────────────┐
> >> > + │ │ │
> >> > + └──────────────┴────────────────┘
> >> > + 8-bit part1 ▲ 8-bit part2 ▲
> >> > + │ │
> >> > + │ │
> >> > + +1 +1
> >> > +
> >> > + after the first addition, we have to shift right by 8, and
> >> > narrow the
> >> > + results back to a byte. Remember that the addition must be done
> >> > in
> >> > + double the precision of the input. However if we know that
> >> > + the
> >> addition
> >> > + `x + 257` does not overflow then we can do the operation in
> >> > + the
> >> current
> >> > + precision. In which case we don't need the pack and unpacks. */
> >> > + auto wcst = wi::to_wide (cst);
> >> > + int pow = wi::exact_log2 (wcst + 1);
> >> > + if (pow == (int) (element_precision (vectype) / 2))
> >> > + {
> >> > + wide_int min,max;
> >> > + /* If we're in a pattern we need to find the orginal
> >> > definition. */
> >> > + tree op0 = oprnd0;
> >> > + gimple *stmt = SSA_NAME_DEF_STMT (oprnd0);
> >> > + stmt_vec_info stmt_info = vinfo->lookup_stmt (stmt);
> >> > + if (is_pattern_stmt_p (stmt_info))
> >> > + {
> >> > + auto orig_stmt = STMT_VINFO_RELATED_STMT (stmt_info);
> >> > + if (is_gimple_assign (STMT_VINFO_STMT (orig_stmt)))
> >> > + op0 = gimple_assign_lhs (STMT_VINFO_STMT (orig_stmt));
> >> > + }
> >>
> >> If this is generally safe (I'm skipping thinking about it in the
> >> interests of a quick review :-)), then I think it should be done in
> >> vect_get_range_info instead. Using gimple_get_lhs would be more
> >> general than handling just assignments.
> >>
> >> > +
> >> > + /* Check that no overflow will occur. If we don't have range
> >> > + information we can't perform the optimization. */
> >> > + if (vect_get_range_info (op0, &min, &max))
> >> > + {
> >> > + wide_int one = wi::to_wide (build_one_cst (itype));
> >> > + wide_int adder = wi::add (one, wi::lshift (one, pow));
> >> > + wi::overflow_type ovf;
> >> > + /* We need adder and max in the same precision. */
> >> > + wide_int zadder
> >> > + = wide_int_storage::from (adder, wi::get_precision
> >> > (max),
> >> > + UNSIGNED);
> >> > + wi::add (max, zadder, UNSIGNED, &ovf);
> >>
> >> Could you explain this a bit more? When do we have mismatched
> >> precisions?
> >
> > C promotion rules will promote e.g.
> >
> > void fun2(uint8_t* restrict pixel, uint8_t level, int n) {
> > for (int i = 0; i < n; i+=1)
> > pixel[i] = (pixel[i] + level) / 0xff; }
> >
> > And have the addition be done as a 32 bit integer. The vectorizer
> > will demote this down to a short, but range information is not stored
> > for patterns. So In the above the range will correctly be 0x1fe but
> > the precision will be that of the original expression, so 32. This
> > will be a mismatch with itype which is derived from the size the vectorizer
> will perform the operation in.
> >
> > Thanks,
> > Tamar
> >
> >>
> >> Thanks,
> >> Richard
> >>
> >> > + if (ovf == wi::OVF_NONE)
> >> > + {
> >> > + *type_out = vectype;
> >> > + tree tadder = wide_int_to_tree (itype, adder);
> >> > + gcall *patt1
> >> > + = gimple_build_call_internal (IFN_ADDH, 2, oprnd0,
> >> tadder);
> >> > + tree lhs = vect_recog_temp_ssa_var (itype, NULL);
> >> > + gimple_call_set_lhs (patt1, lhs);
> >> > + append_pattern_def_seq (vinfo, stmt_vinfo, patt1,
> >> vectype);
> >> > +
> >> > + pattern_stmt
> >> > + = gimple_build_call_internal (IFN_ADDH, 2, oprnd0,
> >> > lhs);
> >> > + lhs = vect_recog_temp_ssa_var (itype, NULL);
> >> > + gimple_call_set_lhs (pattern_stmt, lhs);
> >> > +
> >> > + return pattern_stmt;
> >> > + }
> >> > + }
> >> > + }
> >> > }
> >> >
> >> > if (prec > HOST_BITS_PER_WIDE_INT diff --git
> >> > a/gcc/tree-vect-stmts.cc b/gcc/tree-vect-stmts.cc index
> >> >
> >>
> eb4ca1f184e374d177eb43d5eb93acf6e6a8fde9..3a0fb5ad898ad42c3867f0
> b95
> >> 64f
> >> > c4e066e50081 100644
> >> > --- a/gcc/tree-vect-stmts.cc
> >> > +++ b/gcc/tree-vect-stmts.cc
> >> > @@ -6263,15 +6263,6 @@ vectorizable_operation (vec_info *vinfo,
> >> > }
> >> > target_support_p = (optab_handler (optab, vec_mode)
> >> > != CODE_FOR_nothing);
> >> > - tree cst;
> >> > - if (!target_support_p
> >> > - && op1
> >> > - && (cst = uniform_integer_cst_p (op1)))
> >> > - target_support_p
> >> > - = targetm.vectorize.can_special_div_by_const (code, vectype,
> >> > - wi::to_wide
> >> > (cst),
> >> > - NULL, NULL_RTX,
> >> > - NULL_RTX);
> >> > }
> >> >
> >> > bool using_emulated_vectors_p = vect_emulated_vector_p
> >> > (vectype);
