PowerPC: Add power10 IEEE 128-bit min/max/cmove.
This patch adds support for the new ISA 3.1 (power10) xscmp{eq,gt,ge}qp,
xsmincqp, and xsmaxcqp instructions for IEEE 128-bit conditional move, minimum,
and maximum.
gcc/
2020-08-07 Michael Meissner <meiss...@linux.ibm.com>
* config/rs6000/rs6000.c (rs6000_emit_cmove): Add support for IEEE
128-bit min, max, and comparisons on ISA 3.1.
(rs6000_emit_minmax): Add support for IEEE 128-bit min/max on ISA
3.1.
* config/rs6000/rs6000.md (s<minmax><mode>3, IEEE128 iterator):
New insns for IEEE 128-bit min/max.
(mov<mode>cc, IEEE128 iterator): New insns for IEEE 128-bit
conditional move.
(mov<mode>cc_hardware, IEEE128 iterator): New insns for IEEE
128-bit conditional move.
(mov<mode>cc_invert_hardware, IEEE128 iterator): New insns for
IEEE 128-bit conditional move.
(fpmask<mode>, IEEE128 iterator): New insns for IEEE 128-bit
conditional move.
gcc/testsuite/
2020-08-07 Michael Meissner <meiss...@linux.ibm.com>
* gcc.target/powerpc/float128-minmax-2.c: New test.
---
gcc/config/rs6000/rs6000.c | 18 ++-
gcc/config/rs6000/rs6000.md | 121 +++++++++++++++++++++
.../gcc.target/powerpc/float128-minmax-2.c | 70 ++++++++++++
3 files changed, 208 insertions(+), 1 deletion(-)
create mode 100644 gcc/testsuite/gcc.target/powerpc/float128-minmax-2.c
diff --git a/gcc/config/rs6000/rs6000.c b/gcc/config/rs6000/rs6000.c
index 1c042b0..6874262 100644
--- a/gcc/config/rs6000/rs6000.c
+++ b/gcc/config/rs6000/rs6000.c
@@ -15177,6 +15177,21 @@ rs6000_emit_cmove (rtx dest, rtx op, rtx true_cond,
rtx false_cond)
return 1;
}
+ /* See if we can use the ISA 3.1 min/max/compare instructions for IEEE
+ 128-bit floating point. At present, don't worry about doing conditional
+ moves with different types for the comparison and movement (unlike SF/DF,
+ where you can do a conditional test between double and use float as the
+ if/then parts. */
+ if (TARGET_FLOAT128_HW && TARGET_POWER10 && FLOAT128_IEEE_P (compare_mode)
+ && compare_mode == result_mode)
+ {
+ if (generate_fp_min_max (dest, op, true_cond, false_cond))
+ return 1;
+
+ if (generate_fp_cmove (dest, op, true_cond, false_cond))
+ return 1;
+ }
+
/* Don't allow using floating point comparisons for integer results for
now. */
if (FLOAT_MODE_P (compare_mode) && !FLOAT_MODE_P (result_mode))
@@ -15400,7 +15415,8 @@ rs6000_emit_minmax (rtx dest, enum rtx_code code, rtx
op0, rtx op1)
/* VSX/altivec have direct min/max insns. */
if ((code == SMAX || code == SMIN)
&& (VECTOR_UNIT_ALTIVEC_OR_VSX_P (mode)
- || (mode == SFmode && VECTOR_UNIT_VSX_P (DFmode))))
+ || (mode == SFmode && VECTOR_UNIT_VSX_P (DFmode))
+ || (TARGET_FLOAT128_HW && TARGET_POWER10 && FLOAT128_IEEE_P (mode))))
{
emit_insn (gen_rtx_SET (dest, gen_rtx_fmt_ee (code, mode, op0, op1)));
return;
diff --git a/gcc/config/rs6000/rs6000.md b/gcc/config/rs6000/rs6000.md
index 43b620a..7c2f3e7 100644
--- a/gcc/config/rs6000/rs6000.md
+++ b/gcc/config/rs6000/rs6000.md
@@ -14671,6 +14671,127 @@ (define_insn "*cmp<mode>_hw"
"xscmpuqp %0,%1,%2"
[(set_attr "type" "veccmp")
(set_attr "size" "128")])
+
+;; IEEE 128-bit min/max
+(define_insn "s<minmax><mode>3"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (fp_minmax:IEEE128
+ (match_operand:IEEE128 1 "altivec_register_operand" "v")
+ (match_operand:IEEE128 2 "altivec_register_operand" "v")))]
+ "TARGET_FLOAT128_HW && TARGET_POWER10 && FLOAT128_IEEE_P (<MODE>mode)"
+ "xs<minmax>cqp %0,%1,%2"
+ [(set_attr "type" "fp")
+ (set_attr "size" "128")])
+
+;; IEEE 128-bit conditional move. At present, don't worry about doing
+;; conditional moves with different types for the comparison and movement
+;; (unlike SF/DF, where you can do a conditional test between double and use
+;; float as the if/then parts.
+(define_expand "mov<mode>cc"
+ [(set (match_operand:IEEE128 0 "gpc_reg_operand")
+ (if_then_else:IEEE128 (match_operand 1 "comparison_operator")
+ (match_operand:IEEE128 2 "gpc_reg_operand")
+ (match_operand:IEEE128 3 "gpc_reg_operand")))]
+ "TARGET_FLOAT128_HW && TARGET_POWER10 && FLOAT128_IEEE_P (<MODE>mode)"
+{
+ if (rs6000_emit_cmove (operands[0], operands[1], operands[2], operands[3]))
+ DONE;
+ else
+ FAIL;
+})
+
+(define_insn_and_split "*mov<mode>cc_hardware"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=&v,v")
+ (if_then_else:IEEE128
+ (match_operator:CCFP 1 "fpmask_comparison_operator"
+ [(match_operand:IEEE128 2 "altivec_register_operand" "v,v")
+ (match_operand:IEEE128 3 "altivec_register_operand" "v,v")])
+ (match_operand:IEEE128 4 "altivec_register_operand" "v,v")
+ (match_operand:IEEE128 5 "altivec_register_operand" "v,v")))
+ (clobber (match_scratch:V2DI 6 "=0,&v"))]
+ "TARGET_FLOAT128_HW && TARGET_POWER10"
+ "#"
+ ""
+ [(set (match_dup 6)
+ (if_then_else:V2DI (match_dup 1)
+ (match_dup 7)
+ (match_dup 8)))
+ (set (match_dup 0)
+ (if_then_else:IEEE128 (ne (match_dup 6)
+ (match_dup 8))
+ (match_dup 4)
+ (match_dup 5)))]
+{
+ if (GET_CODE (operands[6]) == SCRATCH)
+ operands[6] = gen_reg_rtx (V2DImode);
+
+ operands[7] = CONSTM1_RTX (V2DImode);
+ operands[8] = CONST0_RTX (V2DImode);
+}
+ [(set_attr "length" "8")
+ (set_attr "type" "vecperm")])
+
+;; Handle inverting the fpmask comparisons.
+(define_insn_and_split "*mov<mode>cc_invert_hardware"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=&v,v")
+ (if_then_else:IEEE128
+ (match_operator:CCFP 1 "invert_fpmask_comparison_operator"
+ [(match_operand:IEEE128 2 "altivec_register_operand" "v,v")
+ (match_operand:IEEE128 3 "altivec_register_operand" "v,v")])
+ (match_operand:IEEE128 4 "altivec_register_operand" "v,v")
+ (match_operand:IEEE128 5 "altivec_register_operand" "v,v")))
+ (clobber (match_scratch:V2DI 6 "=0,&v"))]
+ "TARGET_FLOAT128_HW && TARGET_POWER10"
+ "#"
+ "&& 1"
+ [(set (match_dup 6)
+ (if_then_else:V2DI (match_dup 9)
+ (match_dup 7)
+ (match_dup 8)))
+ (set (match_dup 0)
+ (if_then_else:IEEE128 (ne (match_dup 6)
+ (match_dup 8))
+ (match_dup 5)
+ (match_dup 4)))]
+{
+ rtx op1 = operands[1];
+ enum rtx_code cond = reverse_condition_maybe_unordered (GET_CODE (op1));
+
+ if (GET_CODE (operands[6]) == SCRATCH)
+ operands[6] = gen_reg_rtx (V2DImode);
+
+ operands[7] = CONSTM1_RTX (V2DImode);
+ operands[8] = CONST0_RTX (V2DImode);
+
+ operands[9] = gen_rtx_fmt_ee (cond, CCFPmode, operands[2], operands[3]);
+}
+ [(set_attr "length" "8")
+ (set_attr "type" "vecperm")])
+
+(define_insn "*fpmask<mode>"
+ [(set (match_operand:V2DI 0 "altivec_register_operand" "=v")
+ (if_then_else:V2DI
+ (match_operator:CCFP 1 "fpmask_comparison_operator"
+ [(match_operand:IEEE128 2 "altivec_register_operand" "v")
+ (match_operand:IEEE128 3 "altivec_register_operand" "v")])
+ (match_operand:V2DI 4 "all_ones_constant" "")
+ (match_operand:V2DI 5 "zero_constant" "")))]
+ "TARGET_FLOAT128_HW && TARGET_POWER10 && FLOAT128_IEEE_P (<MODE>mode)"
+ "xscmp%V1qp %0,%2,%3"
+ [(set_attr "type" "fpcompare")
+ (set_attr "size" "128")])
+
+(define_insn "*xxsel<mode>"
+ [(set (match_operand:IEEE128 0 "vsx_register_operand" "=wa")
+ (if_then_else:IEEE128
+ (ne (match_operand:V2DI 1 "vsx_register_operand" "wa")
+ (match_operand:V2DI 2 "zero_constant" ""))
+ (match_operand:IEEE128 3 "vsx_register_operand" "wa")
+ (match_operand:IEEE128 4 "vsx_register_operand" "wa")))]
+ "TARGET_FLOAT128_HW && TARGET_POWER10 && FLOAT128_IEEE_P (<MODE>mode)"
+ "xxsel %x0,%x4,%x3,%x1"
+ [(set_attr "type" "vecmove")
+ (set_attr "size" "128")])
;; Miscellaneous ISA 3.0 (power9) instructions
diff --git a/gcc/testsuite/gcc.target/powerpc/float128-minmax-2.c
b/gcc/testsuite/gcc.target/powerpc/float128-minmax-2.c
new file mode 100644
index 0000000..e689678
--- /dev/null
+++ b/gcc/testsuite/gcc.target/powerpc/float128-minmax-2.c
@@ -0,0 +1,70 @@
+/* { dg-do compile { target { powerpc*-*-* && lp64 } } } */
+/* { dg-require-effective-target power10_ok } */
+/* { dg-options "-mdejagnu-cpu=power10 -O2 -ffast-math" } */
+/* { dg-final { scan-assembler-not "xscmpuqp" } } */
+/* { dg-final { scan-assembler "xscmpeqqp" } } */
+/* { dg-final { scan-assembler "xscmpgtqp" } } */
+/* { dg-final { scan-assembler "xscmpgeqp" } } */
+/* { dg-final { scan-assembler "xsmaxcqp" } } */
+/* { dg-final { scan-assembler "xsmincqp" } } */
+/* { dg-final { scan-assembler "xxsel" } } */
+
+__float128
+f128_max1 (__float128 a, __float128 b)
+{
+ return (a >= b) ? a : b;
+}
+
+__float128
+f128_max2 (__float128 a, __float128 b)
+{
+ return (a > b) ? a : b;
+}
+
+__float128
+f128_min1 (__float128 a, __float128 b)
+{
+ return (a < b) ? a : b;
+}
+
+__float128
+f128_min2 (__float128 a, __float128 b)
+{
+ return (a <= b) ? a : b;
+}
+
+__float128
+f128_cmp_eq (__float128 a, __float128 b, __float128 c, __float128 d)
+{
+ return (a == b) ? c : d;
+}
+
+__float128
+f128_cmp_ne (__float128 a, __float128 b, __float128 c, __float128 d)
+{
+ return (a != b) ? c : d;
+}
+
+__float128
+f128_cmp_gt (__float128 a, __float128 b, __float128 c, __float128 d)
+{
+ return (a > b) ? c : d;
+}
+
+__float128
+f128_cmp_ge (__float128 a, __float128 b, __float128 c, __float128 d)
+{
+ return (a >= b) ? c : d;
+}
+
+__float128
+f128_cmp_lt (__float128 a, __float128 b, __float128 c, __float128 d)
+{
+ return (a < b) ? c : d;
+}
+
+__float128
+f128_cmp_le (__float128 a, __float128 b, __float128 c, __float128 d)
+{
+ return (a <= b) ? c : d;
+}
--
1.8.3.1
--
Michael Meissner, IBM
IBM, M/S 2506R, 550 King Street, Littleton, MA 01460-6245, USA
email: meiss...@linux.ibm.com, phone: +1 (978) 899-4797
