On Mon, Jun 15, 2020 at 2:20 PM Martin Liška <mli...@suse.cz> wrote:
>
> On 6/15/20 1:59 PM, Richard Biener wrote:
> > On Mon, Jun 15, 2020 at 1:19 PM Martin Liška <mli...@suse.cz> wrote:
> >>
> >> On 6/15/20 9:14 AM, Richard Biener wrote:
> >>> On Fri, Jun 12, 2020 at 3:24 PM Martin Liška <mli...@suse.cz> wrote:
> >>>>
> >>>> On 6/12/20 11:43 AM, Richard Biener wrote:
> >>>>> So ... how far are you with enforcing a split VEC_COND_EXPR?
> >>>>> Thus can we avoid the above completely (even as intermediate
> >>>>> state)?
> >>>>
> >>>> Apparently, I'm quite close. Using the attached patch I see only 2
> >>>> testsuite
> >>>> failures:
> >>>>
> >>>> FAIL: gcc.dg/tree-ssa/pr68714.c scan-tree-dump-times reassoc1 " <= " 1
> >>>> FAIL: gcc.target/i386/pr78102.c scan-assembler-times pcmpeqq 3
> >>>>
> >>>> The first one is about teaching reassoc about the SSA_NAMEs in
> >>>> VEC_COND_EXPR. I haven't
> >>>> analyze the second failure.
> >>>>
> >>>> I'm also not sure about the gimlification change, I see a superfluous
> >>>> assignments:
> >>>> vec_cond_cmp.5 = _1 == _2;
> >>>> vec_cond_cmp.6 = vec_cond_cmp.5;
> >>>> vec_cond_cmp.7 = vec_cond_cmp.6;
> >>>> _3 = VEC_COND_EXPR <vec_cond_cmp.7, { -1, -1, -1, -1, -1, -1, -1,
> >>>> -1 }, { 0, 0, 0, 0, 0, 0, 0, 0 }>;
> >>>> ?
> >>>>
> >>>> So with the suggested patch, the EH should be gone as you suggested.
> >>>> Right?
> >>>
> >>> Right, it should be on the comparison already from the start.
> >>>
> >>> @@ -14221,9 +14221,13 @@ gimplify_expr (tree *expr_p, gimple_seq
> >>> *pre_p, gimple_seq *post_p,
> >>> case VEC_COND_EXPR:
> >>> {
> >>> enum gimplify_status r0, r1, r2;
> >>> -
> >>> r0 = gimplify_expr (&TREE_OPERAND (*expr_p, 0), pre_p,
> >>> post_p, is_gimple_condexpr, fb_rvalue);
> >>> + tree xop0 = TREE_OPERAND (*expr_p, 0);
> >>> + tmp = create_tmp_var_raw (TREE_TYPE (xop0), "vec_cond_cmp");
> >>> + gimple_add_tmp_var (tmp);
> >>> + gimplify_assign (tmp, xop0, pre_p);
> >>> + TREE_OPERAND (*expr_p, 0) = tmp;
> >>> r1 = gimplify_expr (&TREE_OPERAND (*expr_p, 1), pre_p,
> >>> post_p, is_gimple_val, fb_rvalue);
> >>>
> >>> all of VEC_COND_EXPR can now be a simple goto expr_3;
> >>
> >> Works for me, thanks!
> >>
> >>>
> >>> diff --git a/gcc/tree-ssa-forwprop.c b/gcc/tree-ssa-forwprop.c
> >>> index 494c9e9c20b..090fb52a2f1 100644
> >>> --- a/gcc/tree-ssa-forwprop.c
> >>> +++ b/gcc/tree-ssa-forwprop.c
> >>> @@ -3136,6 +3136,10 @@ pass_forwprop::execute (function *fun)
> >>> if (code == COND_EXPR
> >>> || code == VEC_COND_EXPR)
> >>> {
> >>> + /* Do not propagate into VEC_COND_EXPRs. */
> >>> + if (code == VEC_COND_EXPR)
> >>> + break;
> >>> +
> >>>
> >>> err - remove the || code == VEC_COND_EXPR instead?
> >>
> >> Yep.
> >>
> >>>
> >>> @@ -2221,24 +2226,12 @@ expand_vector_operations (void)
> >>> {
> >>> gimple_stmt_iterator gsi;
> >>> basic_block bb;
> >>> - bool cfg_changed = false;
> >>>
> >>> FOR_EACH_BB_FN (bb, cfun)
> >>> - {
> >>> - for (gsi = gsi_start_bb (bb); !gsi_end_p (gsi); gsi_next (&gsi))
> >>> - {
> >>> - expand_vector_operations_1 (&gsi);
> >>> - /* ??? If we do not cleanup EH then we will ICE in
> >>> - verification. But in reality we have created wrong-code
> >>> - as we did not properly transition EH info and edges to
> >>> - the piecewise computations. */
> >>> - if (maybe_clean_eh_stmt (gsi_stmt (gsi))
> >>> - && gimple_purge_dead_eh_edges (bb))
> >>> - cfg_changed = true;
> >>> - }
> >>> - }
> >>>
> >>> I'm not sure about this. Consider the C++ testcase where
> >>> the ?: is replaced by a division. If veclower needs to replace
> >>> that with four scalrar division statements then the above
> >>> still applies - veclower does not correctly duplicate EH info
> >>> and EH edges to the individual divisions (and we do not know
> >>> which component might trap).
> >>>
> >>> So please leave the above in. You can try if using integer
> >>> division makes it break and add such a testcase if there's
> >>> no coverage for this in the testsuite.
> >>
> >> I'm leaving that above. Can you please explain how can a division test-case
> >> be created?
> >
> > typedef long v2di __attribute__((vector_size(16)));
> >
> > v2di foo (v2di a, v2di b)
> > {
> > try
> > {
> > v2di res = a / b;
> > return res;
> > }
> > catch (...)
> > {
> > return (v2di){};
> > }
> > }
> >
> > with -fnon-call-exceptions I see in t.ii.090t.ehdisp (correctly):
> >
> > ;; basic block 2, loop depth 0
> > ;; pred: ENTRY
> > [LP 1] _6 = a_4(D) / b_5(D);
> > ;; succ: 5
> > ;; 3
> >
> > while after t.ii.226t.veclower we have
> >
> > ;; basic block 2, loop depth 0
> > ;; pred: ENTRY
> > _13 = BIT_FIELD_REF <a_4(D), 64, 0>;
> > _14 = BIT_FIELD_REF <b_5(D), 64, 0>;
> > _15 = _13 / _14;
> > _16 = BIT_FIELD_REF <a_4(D), 64, 64>;
> > _17 = BIT_FIELD_REF <b_5(D), 64, 64>;
> > _18 = _16 / _17;
> > _6 = {_15, _18};
> > res_7 = _6;
> > _8 = res_7;
> > ;; succ: 3
> >
> > and all EH is gone and we'd ICE if you remove the above hunk. Hopefully.
>
> Yes, it ICEs then:
>
>
> ./xg++ -B. ~/Programming/testcases/ice.c -c -fnon-call-exceptions -O3
> /home/marxin/Programming/testcases/ice.c: In function ‘v2di foo(v2di, v2di)’:
> /home/marxin/Programming/testcases/ice.c:3:6: error: statement marked for
> throw, but doesn’t
> 3 | v2di foo (v2di a, v2di b)
> | ^~~
> _6 = {_12, _15};
> during GIMPLE pass: veclower2
> /home/marxin/Programming/testcases/ice.c:3:6: internal compiler error:
> verify_gimple failed
> 0x10e308a verify_gimple_in_cfg(function*, bool)
> /home/marxin/Programming/gcc/gcc/tree-cfg.c:5461
> 0xfc9caf execute_function_todo
> /home/marxin/Programming/gcc/gcc/passes.c:1985
> 0xfcaafc do_per_function
> /home/marxin/Programming/gcc/gcc/passes.c:1640
> 0xfcaafc execute_todo
> /home/marxin/Programming/gcc/gcc/passes.c:2039
> Please submit a full bug report,
> with preprocessed source if appropriate.
> Please include the complete backtrace with any bug report.
> See <https://gcc.gnu.org/bugs/> for instructions.
>
> >
> > We still generate wrong-code obviously as we'd need to duplicate the
> > EH info on each component division (and split blocks and generate
> > extra EH edges). That's a pre-existing bug of course. I just wanted
> > to avoid to create a new instance just because of the early instruction
> > selection for VEC_COND_EXPR.
>
> Fine!
>
> >
> >>>
> >>> What's missing from the patch is adjusting
> >>> verify_gimple_assign_ternary from
> >>>
> >>> if (((rhs_code == VEC_COND_EXPR || rhs_code == COND_EXPR)
> >>> ? !is_gimple_condexpr (rhs1) : !is_gimple_val (rhs1))
> >>> || !is_gimple_val (rhs2)
> >>> || !is_gimple_val (rhs3))
> >>> {
> >>> error ("invalid operands in ternary operation");
> >>> return true;
> >>>
> >>> to the same with the rhs_code == VEC_COND_EXPR case removed.
> >>
> >> Hmm. I'm not sure I've got this comment. Why do we want to change it
> >> and is it done wright in the patch?
> >
> > Ah, I missed the hunk you added.
>
> That explains the confusion I got.
>
> > But the check should be an inclusive
> > one, not an exclusive one and earlier accepting a is_gimple_condexpr
> > is superfluous when you later reject the tcc_comparison part. Just
> > testing is_gimple_val is better. So yes, remove your tree-cfg.c hunk
> > and just adjust the above test.
>
> I simplified that.
>
> Patch can bootstrap on x86_64-linux-gnu and survives regression tests.
Please double-check the changelog
(do_store_flag):
+ tree-vect-isel.o \
IMHO we want to move more of the pattern matching magic of RTL
expansion here to obsolete TER. So please name it gimple-isel.cc
(.cc!, not .c)
+ gassign *assign = dyn_cast<gassign *> (SSA_NAME_DEF_STMT (cond));
+ if (stmt != NULL
+ && TREE_CODE_CLASS (gimple_assign_rhs_code (assign)) != tcc_comparison)
+ return ERROR_MARK;
you want stmt == NULL || TREE_CODE_CLASS (...)
in case the def stmt is a call.
+ gimple_seq seq;
+ tree exp = force_gimple_operand (comb, &seq, true, NULL_TREE);
+ if (seq)
+ {
+ gimple_stmt_iterator gsi = gsi_for_stmt (vcond0);
+ gsi_insert_before (&gsi, seq, GSI_SAME_STMT);
+ }
use force_gimple_operand_gsi that makes the above simpler.
if (invert)
- std::swap (*gimple_assign_rhs2_ptr (stmt0),
- *gimple_assign_rhs3_ptr (stmt0));
- update_stmt (stmt0);
+ std::swap (*gimple_assign_rhs2_ptr (vcond0),
+ *gimple_assign_rhs3_ptr (vcond0));
use swap_ssa_operands.
+ gimple_assign_set_rhs1 (vcond0, exp);
+ update_stmt (vcond0);
diff --git a/gcc/tree-vect-stmts.c b/gcc/tree-vect-stmts.c
index cf2d979fea1..710b17a7c5c 100644
--- a/gcc/tree-vect-stmts.c
+++ b/gcc/tree-vect-stmts.c
@@ -9937,8 +9937,8 @@ vectorizable_condition (vec_info *vinfo,
{
vec_cond_rhs = vec_oprnds1[i];
if (bitop1 == NOP_EXPR)
- vec_compare = build2 (cond_code, vec_cmp_type,
- vec_cond_lhs, vec_cond_rhs);
+ vec_compare = gimplify_build2 (gsi, cond_code, vec_cmp_type,
+ vec_cond_lhs, vec_cond_rhs);
else
{
please don't introduce more uses of gimplify_buildN - I'd like to
get rid of those. You can use
gimple_seq stmts = NULL;
vec_compare = gimple_build (&stmts, cond_code, ...);
gsi_insert_seq_before/after (...);
OK with those changes.
Thanks,
Richard.
> Thanks,
> Martin
>
> >
> >>>
> >>> You'll likely figure the vectorizer still creates some VEC_COND_EXPRs
> >>> with embedded comparisons.
> >>
> >> I've fixed 2 failing test-cases I mentioned in the previous email.
> >>
> >> Martin
> >>
> >>>
> >>> Thanks,
> >>> Richard.
> >>>
> >>>
> >>>> Martin
> >>
>
