ping
Cleanup the 32-bit multiply patterns. Merge the pre-Armv6 with the Armv6
patterns, remove useless alternatives and order the accumulator operands
to prefer MLA Ra, Rb, Rc, Ra whenever feasible.
Bootstrap OK on armhf, regress passes.
ChangeLog:
2019-09-03 Wilco Dijkstra <wdijk...@arm.com>
* config/arm/arm.md (arm_mulsi3): Remove pattern.
(arm_mulsi3_v6): Likewise.
(mulsi3addsi_v6): Likewise.
(mulsi3subsi): Likewise.
(mul): Add new multiply pattern.
(mla): Likewise.
(mls): Likewise.
--
diff --git a/gcc/config/arm/arm.md b/gcc/config/arm/arm.md
index
66dafdc47b7cfc37c131764e482d47bcaab90538..681358512e88f6823d1b6d59038f387daaec226e
100644
--- a/gcc/config/arm/arm.md
+++ b/gcc/config/arm/arm.md
@@ -1594,64 +1594,44 @@ (define_expand "mulsi3"
""
)
-;; Use `&' and then `0' to prevent the operands 0 and 1 being the same
-(define_insn "*arm_mulsi3"
- [(set (match_operand:SI 0 "s_register_operand" "=&r,&r")
- (mult:SI (match_operand:SI 2 "s_register_operand" "r,r")
- (match_operand:SI 1 "s_register_operand" "%0,r")))]
- "TARGET_32BIT && !arm_arch6"
+;; Use `&' and then `0' to prevent operands 0 and 2 being the same
+(define_insn "*mul"
+ [(set (match_operand:SI 0 "s_register_operand" "=l,r,&r,&r")
+ (mult:SI (match_operand:SI 2 "s_register_operand" "l,r,r,r")
+ (match_operand:SI 1 "s_register_operand" "%0,r,0,r")))]
+ "TARGET_32BIT"
"mul%?\\t%0, %2, %1"
[(set_attr "type" "mul")
- (set_attr "predicable" "yes")]
-)
-
-(define_insn "*arm_mulsi3_v6"
- [(set (match_operand:SI 0 "s_register_operand" "=l,l,r")
- (mult:SI (match_operand:SI 1 "s_register_operand" "0,l,r")
- (match_operand:SI 2 "s_register_operand" "l,0,r")))]
- "TARGET_32BIT && arm_arch6"
- "mul%?\\t%0, %1, %2"
- [(set_attr "type" "mul")
(set_attr "predicable" "yes")
- (set_attr "arch" "t2,t2,*")
+ (set_attr "arch" "t2,v6,nov6,nov6")
(set_attr "length" "4")
- (set_attr "predicable_short_it" "yes,yes,no")]
+ (set_attr "predicable_short_it" "yes,no,*,*")]
)
-;; Unnamed templates to match MLA instruction.
+;; MLA and MLS instruction. Use operand 1 for the accumulator to prefer
+;; reusing the same register.
-(define_insn "*mulsi3addsi"
- [(set (match_operand:SI 0 "s_register_operand" "=&r,&r,&r,&r")
+(define_insn "*mla"
+ [(set (match_operand:SI 0 "s_register_operand" "=r,&r,&r,&r")
(plus:SI
- (mult:SI (match_operand:SI 2 "s_register_operand" "r,r,r,r")
- (match_operand:SI 1 "s_register_operand" "%0,r,0,r"))
- (match_operand:SI 3 "s_register_operand" "r,r,0,0")))]
- "TARGET_32BIT && !arm_arch6"
- "mla%?\\t%0, %2, %1, %3"
- [(set_attr "type" "mla")
- (set_attr "predicable" "yes")]
-)
-
-(define_insn "*mulsi3addsi_v6"
- [(set (match_operand:SI 0 "s_register_operand" "=r")
- (plus:SI
- (mult:SI (match_operand:SI 2 "s_register_operand" "r")
- (match_operand:SI 1 "s_register_operand" "r"))
- (match_operand:SI 3 "s_register_operand" "r")))]
- "TARGET_32BIT && arm_arch6"
- "mla%?\\t%0, %2, %1, %3"
+ (mult:SI (match_operand:SI 3 "s_register_operand" "r,r,r,r")
+ (match_operand:SI 2 "s_register_operand" "%r,r,0,r"))
+ (match_operand:SI 1 "s_register_operand" "r,0,r,r")))]
+ "TARGET_32BIT"
+ "mla%?\\t%0, %3, %2, %1"
[(set_attr "type" "mla")
- (set_attr "predicable" "yes")]
+ (set_attr "predicable" "yes")
+ (set_attr "arch" "v6,nov6,nov6,nov6")]
)
-(define_insn "*mulsi3subsi"
+(define_insn "*mls"
[(set (match_operand:SI 0 "s_register_operand" "=r")
(minus:SI
- (match_operand:SI 3 "s_register_operand" "r")
- (mult:SI (match_operand:SI 2 "s_register_operand" "r")
- (match_operand:SI 1 "s_register_operand" "r"))))]
+ (match_operand:SI 1 "s_register_operand" "r")
+ (mult:SI (match_operand:SI 3 "s_register_operand" "r")
+ (match_operand:SI 2 "s_register_operand" "r"))))]
