This patch adds support for fusing a conditional add or subtract
with a multiplication, so that we can use fused multiply-add and
multiply-subtract operations for fully-masked reductions.  E.g.
for SVE we vectorise:

  double res = 0.0;
  for (int i = 0; i < n; ++i)
    res += x[i] * y[i];

using a fully-masked loop in which the loop body has the form:

  res_1 = PHI<0(preheader), res_2(latch)>;
  avec = IFN_MASK_LOAD (loop_mask, a)
  bvec = IFN_MASK_LOAD (loop_mask, b)
  prod = avec * bvec;
  res_2 = IFN_COND_ADD (loop_mask, res_1, prod);

where the last statement does the equivalent of:

  res_2 = loop_mask ? res_1 + prod : res_1;

(operating elementwise).  The point of the patch is to convert the last
two statements into a single internal function that is the equivalent of:

  res_2 = loop_mask ? fma (avec, bvec, res_1) : res_1;

(again operating elementwise).

All current conditional X operations have the form "do X or don't do X
to the first operand" (add/don't add to first operand, etc.).  However,
the FMA optabs and functions are ordered so that the accumulator comes
last.  There were two obvious ways of resolving this: break the
convention for conditional operators and have "add/don't add to the
final operand" or break the convention for FMA and put the accumulator
first.  The patch goes for the latter, but adds _REV to make it obvious
that the operands are in a different order.

Tested on aarch64-linux-gnu (with and without SVE), aarch64_be-elf
and x86_64-linux-gnu.  OK to install?

Richard


2018-05-16  Richard Sandiford  <richard.sandif...@linaro.org>
            Alan Hayward  <alan.hayw...@arm.com>
            David Sherwood  <david.sherw...@arm.com>

gcc/
        * doc/md.texi (cond_fma_rev, cond_fnma_rev): Document.
        * optabs.def (cond_fma_rev, cond_fnma_rev): New optabs.
        * internal-fn.def (COND_FMA_REV, COND_FNMA_REV): New internal
        functions.
        * internal-fn.h (can_interpret_as_conditional_op_p): Declare.
        * internal-fn.c (cond_ternary_direct): New macro.
        (expand_cond_ternary_optab_fn): Likewise.
        (direct_cond_ternary_optab_supported_p): Likewise.
        (FOR_EACH_CODE_MAPPING): Likewise.
        (get_conditional_internal_fn): Use FOR_EACH_CODE_MAPPING.
        (conditional_internal_fn_code): New function.
        (can_interpret_as_conditional_op_p): Likewise.
        * tree-ssa-math-opts.c (fused_cond_internal_fn): New function.
        (convert_mult_to_fma_1): Transform calls to IFN_COND_ADD to
        IFN_COND_FMA_REV and calls to IFN_COND_SUB to IFN_COND_FNMA_REV.
        (convert_mult_to_fma): Handle calls to IFN_COND_ADD and IFN_COND_SUB.
        * genmatch.c (commutative_op): Handle CFN_COND_FMA_REV and
        CFN_COND_FNMA_REV.
        * config/aarch64/iterators.md (UNSPEC_COND_FMLA): New unspec.
        (UNSPEC_COND_FMLS): Likewise.
        (optab, sve_fp_op): Handle them.
        (SVE_COND_INT_OP): Rename to...
        (SVE_COND_INT2_OP): ...this.
        (SVE_COND_FP_OP): Rename to...
        (SVE_COND_FP2_OP): ...this.
        (SVE_COND_FP3_OP): New iterator.
        * config/aarch64/aarch64-sve.md (cond_<optab><mode>): Update
        for new iterator names.  Add a pattern for SVE_COND_FP3_OP.

gcc/testsuite/
        * gcc.target/aarch64/sve/reduc_4.c: New test.
        * gcc.target/aarch64/sve/reduc_6.c: Likewise.
        * gcc.target/aarch64/sve/reduc_7.c: Likewise.

Index: gcc/doc/md.texi
===================================================================
--- gcc/doc/md.texi     2018-05-16 10:23:03.590853492 +0100
+++ gcc/doc/md.texi     2018-05-16 10:23:03.886838736 +0100
@@ -6367,6 +6367,32 @@ be in a normal C @samp{?:} condition.
 Operands 0, 2 and 3 all have mode @var{m}, while operand 1 has the mode
 returned by @code{TARGET_VECTORIZE_GET_MASK_MODE}.
 
+@cindex @code{cond_fma_rev@var{mode}} instruction pattern
+@item @samp{cond_fma_rev@var{mode}}
+Similar to @samp{cond_add@var{m}}, but compute:
+@smallexample
+op0 = op1 ? fma (op3, op4, op2) : op2;
+@end smallexample
+for scalars and:
+@smallexample
+op0[I] = op1[I] ? fma (op3[I], op4[I], op2[I]) : op2[I];
+@end smallexample
+for vectors.  The @samp{_rev} indicates that the addend (operand 2)
+comes first.
+
+@cindex @code{cond_fnma_rev@var{mode}} instruction pattern
+@item @samp{cond_fnma_rev@var{mode}}
+Similar to @samp{cond_fma_rev@var{m}}, but negate operand 3 before
+multiplying it.  That is, the instruction performs:
+@smallexample
+op0 = op1 ? fma (-op3, op4, op2) : op2;
+@end smallexample
+for scalars and:
+@smallexample
+op0[I] = op1[I] ? fma (-op3[I], op4[I], op2[I]) : op2[I];
+@end smallexample
+for vectors.
+
 @cindex @code{neg@var{mode}cc} instruction pattern
 @item @samp{neg@var{mode}cc}
 Similar to @samp{mov@var{mode}cc} but for conditional negation.  Conditionally
Index: gcc/optabs.def
===================================================================
--- gcc/optabs.def      2018-05-16 10:23:03.590853492 +0100
+++ gcc/optabs.def      2018-05-16 10:23:03.887838686 +0100
@@ -222,6 +222,8 @@ OPTAB_D (notcc_optab, "not$acc")
 OPTAB_D (movcc_optab, "mov$acc")
 OPTAB_D (cond_add_optab, "cond_add$a")
 OPTAB_D (cond_sub_optab, "cond_sub$a")
+OPTAB_D (cond_fma_rev_optab, "cond_fma_rev$a")
+OPTAB_D (cond_fnma_rev_optab, "cond_fnma_rev$a")
 OPTAB_D (cond_and_optab, "cond_and$a")
 OPTAB_D (cond_ior_optab, "cond_ior$a")
 OPTAB_D (cond_xor_optab, "cond_xor$a")
Index: gcc/internal-fn.def
===================================================================
--- gcc/internal-fn.def 2018-05-16 10:23:03.590853492 +0100
+++ gcc/internal-fn.def 2018-05-16 10:23:03.887838686 +0100
@@ -59,7 +59,8 @@ along with GCC; see the file COPYING3.
    - binary: a normal binary optab, such as vec_interleave_lo_<mode>
    - ternary: a normal ternary optab, such as fma<mode>4
 
-   - cond_binary: a conditional binary optab, such as add<mode>cc
+   - cond_binary: a conditional binary optab, such as cond_add<mode>
+   - cond_ternary: a conditional ternary optab, such as cond_fma_rev<mode>
 
    - fold_left: for scalar = FN (scalar, vector), keyed off the vector mode
 
@@ -143,6 +144,9 @@ DEF_INTERNAL_OPTAB_FN (FMS, ECF_CONST, f
 DEF_INTERNAL_OPTAB_FN (FNMA, ECF_CONST, fnma, ternary)
 DEF_INTERNAL_OPTAB_FN (FNMS, ECF_CONST, fnms, ternary)
 
+DEF_INTERNAL_OPTAB_FN (COND_FMA_REV, ECF_CONST, cond_fma_rev, cond_ternary)
+DEF_INTERNAL_OPTAB_FN (COND_FNMA_REV, ECF_CONST, cond_fnma_rev, cond_ternary)
+
 DEF_INTERNAL_OPTAB_FN (COND_ADD, ECF_CONST, cond_add, cond_binary)
 DEF_INTERNAL_OPTAB_FN (COND_SUB, ECF_CONST, cond_sub, cond_binary)
 DEF_INTERNAL_SIGNED_OPTAB_FN (COND_MIN, ECF_CONST, first,
Index: gcc/internal-fn.h
===================================================================
--- gcc/internal-fn.h   2018-05-16 10:23:03.590853492 +0100
+++ gcc/internal-fn.h   2018-05-16 10:23:03.887838686 +0100
@@ -191,6 +191,8 @@ direct_internal_fn_supported_p (internal
 extern bool set_edom_supported_p (void);
 
 extern internal_fn get_conditional_internal_fn (tree_code);
+extern bool can_interpret_as_conditional_op_p (gimple *, tree_code *,
+                                              tree *, tree (&)[3]);
 
 extern bool internal_load_fn_p (internal_fn);
 extern bool internal_store_fn_p (internal_fn);
Index: gcc/internal-fn.c
===================================================================
--- gcc/internal-fn.c   2018-05-16 10:23:03.590853492 +0100
+++ gcc/internal-fn.c   2018-05-16 10:23:03.887838686 +0100
@@ -93,6 +93,7 @@ #define binary_direct { 0, 0, true }
 #define ternary_direct { 0, 0, true }
 #define cond_unary_direct { 1, 1, true }
 #define cond_binary_direct { 1, 1, true }
+#define cond_ternary_direct { 1, 1, true }
 #define while_direct { 0, 2, false }
 #define fold_extract_direct { 2, 2, false }
 #define fold_left_direct { 1, 1, false }
@@ -2972,6 +2973,9 @@ #define expand_cond_unary_optab_fn(FN, S
 #define expand_cond_binary_optab_fn(FN, STMT, OPTAB) \
   expand_direct_optab_fn (FN, STMT, OPTAB, 3)
 
+#define expand_cond_ternary_optab_fn(FN, STMT, OPTAB) \
+  expand_direct_optab_fn (FN, STMT, OPTAB, 4)
+
 #define expand_fold_extract_optab_fn(FN, STMT, OPTAB) \
   expand_direct_optab_fn (FN, STMT, OPTAB, 3)
 
@@ -3054,6 +3058,7 @@ #define direct_binary_optab_supported_p
 #define direct_ternary_optab_supported_p direct_optab_supported_p
 #define direct_cond_unary_optab_supported_p direct_optab_supported_p
 #define direct_cond_binary_optab_supported_p direct_optab_supported_p
+#define direct_cond_ternary_optab_supported_p direct_optab_supported_p
 #define direct_mask_load_optab_supported_p direct_optab_supported_p
 #define direct_load_lanes_optab_supported_p multi_vector_optab_supported_p
 #define direct_mask_load_lanes_optab_supported_p multi_vector_optab_supported_p
@@ -3198,6 +3203,17 @@ #define DEF_INTERNAL_FN(CODE, FLAGS, FNS
   0
 };
 
+/* Invoke T(CODE, IFN) for each conditional function IFN that maps to a
+   tree code CODE.  */
+#define FOR_EACH_CODE_MAPPING(T) \
+  T (PLUS_EXPR, IFN_COND_ADD) \
+  T (MINUS_EXPR, IFN_COND_SUB) \
+  T (MIN_EXPR, IFN_COND_MIN) \
+  T (MAX_EXPR, IFN_COND_MAX) \
+  T (BIT_AND_EXPR, IFN_COND_AND) \
+  T (BIT_IOR_EXPR, IFN_COND_IOR) \
+  T (BIT_XOR_EXPR, IFN_COND_XOR)
+
 /* Return a function that performs the conditional form of CODE, i.e.:
 
      LHS = RHS1 ? RHS2 CODE RHS3 : RHS2
@@ -3210,25 +3226,78 @@ get_conditional_internal_fn (tree_code c
 {
   switch (code)
     {
-    case PLUS_EXPR:
-      return IFN_COND_ADD;
-    case MINUS_EXPR:
-      return IFN_COND_SUB;
-    case MIN_EXPR:
-      return IFN_COND_MIN;
-    case MAX_EXPR:
-      return IFN_COND_MAX;
-    case BIT_AND_EXPR:
-      return IFN_COND_AND;
-    case BIT_IOR_EXPR:
-      return IFN_COND_IOR;
-    case BIT_XOR_EXPR:
-      return IFN_COND_XOR;
+#define CASE(CODE, IFN) case CODE: return IFN;
+      FOR_EACH_CODE_MAPPING(CASE)
+#undef CASE
     default:
       return IFN_LAST;
     }
 }
 
+/* If IFN implements the conditional form of a tree code, return that
+   tree code, otherwise return ERROR_MARK.  */
+
+static tree_code
+conditional_internal_fn_code (internal_fn ifn)
+{
+  switch (ifn)
+    {
+#define CASE(CODE, IFN) case IFN: return CODE;
+      FOR_EACH_CODE_MAPPING(CASE)
+#undef CASE
+    default:
+      return ERROR_MARK;
+    }
+}
+
+/* Return true if STMT can be interpreted as a conditional tree code
+   operation of the form:
+
+     LHS = COND ? OP (RHS1, ...) : RHS1;
+
+   operating elementwise if the operands are vectors.  This includes
+   the case of an all-true COND, so that the operation always happens.
+
+   When returning true, set:
+
+   - *CODE_OUT to the tree code
+   - *COND_OUT to the condition COND, or to NULL_TREE if the condition
+     is known to be all-true
+   - OPS[I] to operand I of *CODE_OUT.  */
+
+bool
+can_interpret_as_conditional_op_p (gimple *stmt, tree_code *code_out,
+                                  tree *cond_out, tree (&ops)[3])
+{
+  if (gassign *assign = dyn_cast <gassign *> (stmt))
+    {
+      *code_out = gimple_assign_rhs_code (assign);
+      *cond_out = NULL_TREE;
+      ops[0] = gimple_assign_rhs1 (assign);
+      ops[1] = gimple_assign_rhs2 (assign);
+      ops[2] = gimple_assign_rhs3 (assign);
+      return true;
+    }
+  if (gcall *call = dyn_cast <gcall *> (stmt))
+    if (gimple_call_internal_p (call))
+      {
+       internal_fn ifn = gimple_call_internal_fn (call);
+       tree_code code = conditional_internal_fn_code (ifn);
+       if (code != ERROR_MARK)
+         {
+           *code_out = code;
+           *cond_out = gimple_call_arg (call, 0);
+           if (integer_truep (*cond_out))
+             *cond_out = NULL_TREE;
+           unsigned int nargs = gimple_call_num_args (call) - 1;
+           for (unsigned int i = 0; i < 3; ++i)
+             ops[i] = i < nargs ? gimple_call_arg (call, i + 1) : NULL_TREE;
+           return true;
+         }
+      }
+  return false;
+}
+
 /* Return true if IFN is some form of load from memory.  */
 
 bool
Index: gcc/tree-ssa-math-opts.c
===================================================================
--- gcc/tree-ssa-math-opts.c    2018-05-16 10:23:03.590853492 +0100
+++ gcc/tree-ssa-math-opts.c    2018-05-16 10:23:03.889838586 +0100
@@ -2640,6 +2640,24 @@ convert_plusminus_to_widen (gimple_stmt_
   return true;
 }
 
+/* Return the internal function that implements:
+
+     LHS = COND ? A CODE B * C : A.  */
+
+static internal_fn
+fused_cond_internal_fn (tree_code code)
+{
+  switch (code)
+    {
+    case PLUS_EXPR:
+      return IFN_COND_FMA_REV;
+    case MINUS_EXPR:
+      return IFN_COND_FNMA_REV;
+    default:
+      gcc_unreachable ();
+    }
+}
+
 /* gimple_fold callback that "valueizes" everything.  */
 
 static tree
@@ -2663,7 +2681,6 @@ convert_mult_to_fma_1 (tree mul_result,
   FOR_EACH_IMM_USE_STMT (use_stmt, imm_iter, mul_result)
     {
       gimple_stmt_iterator gsi = gsi_for_stmt (use_stmt);
-      enum tree_code use_code;
       tree addop, mulop1 = op1, result = mul_result;
       bool negate_p = false;
       gimple_seq seq = NULL;
@@ -2671,8 +2688,8 @@ convert_mult_to_fma_1 (tree mul_result,
       if (is_gimple_debug (use_stmt))
        continue;
 
-      use_code = gimple_assign_rhs_code (use_stmt);
-      if (use_code == NEGATE_EXPR)
+      if (is_gimple_assign (use_stmt)
+         && gimple_assign_rhs_code (use_stmt) == NEGATE_EXPR)
        {
          result = gimple_assign_lhs (use_stmt);
          use_operand_p use_p;
@@ -2683,23 +2700,30 @@ convert_mult_to_fma_1 (tree mul_result,
 
          use_stmt = neguse_stmt;
          gsi = gsi_for_stmt (use_stmt);
-         use_code = gimple_assign_rhs_code (use_stmt);
          negate_p = true;
        }
 
-      if (gimple_assign_rhs1 (use_stmt) == result)
-       {
-         addop = gimple_assign_rhs2 (use_stmt);
-         /* a * b - c -> a * b + (-c)  */
-         if (gimple_assign_rhs_code (use_stmt) == MINUS_EXPR)
-           addop = gimple_build (&seq, NEGATE_EXPR, type, addop);
-       }
+      tree cond, ops[3];
+      tree_code code;
+      if (!can_interpret_as_conditional_op_p (use_stmt, &code, &cond, ops))
+       gcc_unreachable ();
+      addop = ops[0] == result ? ops[1] : ops[0];
+
+      internal_fn ifn;
+      if (cond)
+       ifn = fused_cond_internal_fn (code);
       else
        {
-         addop = gimple_assign_rhs1 (use_stmt);
-         /* a - b * c -> (-b) * c + a */
-         if (gimple_assign_rhs_code (use_stmt) == MINUS_EXPR)
-           negate_p = !negate_p;
+         ifn = IFN_FMA;
+         if (code == MINUS_EXPR)
+           {
+             if (ops[0] == result)
+               /* a * b - c -> a * b + (-c)  */
+               addop = gimple_build (&seq, NEGATE_EXPR, type, addop);
+             else
+               /* a - b * c -> (-b) * c + a */
+               negate_p = !negate_p;
+           }
        }
 
       if (negate_p)
@@ -2707,8 +2731,13 @@ convert_mult_to_fma_1 (tree mul_result,
 
       if (seq)
        gsi_insert_seq_before (&gsi, seq, GSI_SAME_STMT);
-      fma_stmt = gimple_build_call_internal (IFN_FMA, 3, mulop1, op2, addop);
-      gimple_call_set_lhs (fma_stmt, gimple_assign_lhs (use_stmt));
+
+      if (ifn == IFN_FMA)
+       fma_stmt = gimple_build_call_internal (IFN_FMA, 3, mulop1, op2, addop);
+      else
+       fma_stmt = gimple_build_call_internal (ifn, 4, cond, addop,
+                                              mulop1, op2);
+      gimple_set_lhs (fma_stmt, gimple_get_lhs (use_stmt));
       gimple_call_set_nothrow (fma_stmt, !stmt_can_throw_internal (use_stmt));
       gsi_replace (&gsi, fma_stmt, true);
       /* Valueize aggressively so that we generate FMS, FNMA and FNMS
@@ -2891,7 +2920,6 @@ convert_mult_to_fma (gimple *mul_stmt, t
      as an addition.  */
   FOR_EACH_IMM_USE_FAST (use_p, imm_iter, mul_result)
     {
-      enum tree_code use_code;
       tree result = mul_result;
       bool negate_p = false;
 
@@ -2912,13 +2940,9 @@ convert_mult_to_fma (gimple *mul_stmt, t
       if (gimple_bb (use_stmt) != gimple_bb (mul_stmt))
        return false;
 
-      if (!is_gimple_assign (use_stmt))
-       return false;
-
-      use_code = gimple_assign_rhs_code (use_stmt);
-
       /* A negate on the multiplication leads to FNMA.  */
-      if (use_code == NEGATE_EXPR)
+      if (is_gimple_assign (use_stmt)
+         && gimple_assign_rhs_code (use_stmt) == NEGATE_EXPR)
        {
          ssa_op_iter iter;
          use_operand_p usep;
@@ -2940,17 +2964,19 @@ convert_mult_to_fma (gimple *mul_stmt, t
          use_stmt = neguse_stmt;
          if (gimple_bb (use_stmt) != gimple_bb (mul_stmt))
            return false;
-         if (!is_gimple_assign (use_stmt))
-           return false;
 
-         use_code = gimple_assign_rhs_code (use_stmt);
          negate_p = true;
        }
 
-      switch (use_code)
+      tree cond, ops[3];
+      tree_code code;
+      if (!can_interpret_as_conditional_op_p (use_stmt, &code, &cond, ops))
+       return false;
+
+      switch (code)
        {
        case MINUS_EXPR:
-         if (gimple_assign_rhs2 (use_stmt) == result)
+         if (ops[1] == result)
            negate_p = !negate_p;
          break;
        case PLUS_EXPR:
@@ -2960,47 +2986,52 @@ convert_mult_to_fma (gimple *mul_stmt, t
          return false;
        }
 
-      /* If the subtrahend (gimple_assign_rhs2 (use_stmt)) is computed
-        by a MULT_EXPR that we'll visit later, we might be able to
-        get a more profitable match with fnma.
+      if (cond)
+       {
+         /* The multiplication must be the second operand.  */
+         if (cond == result || ops[0] == result)
+           return false;
+         internal_fn ifn = fused_cond_internal_fn (code);
+         if (!direct_internal_fn_supported_p (ifn, type, opt_type))
+           return false;
+       }
+
+      /* If the subtrahend (OPS[1]) is computed by a MULT_EXPR that
+        we'll visit later, we might be able to get a more profitable
+        match with fnma.
         OTOH, if we don't, a negate / fma pair has likely lower latency
         that a mult / subtract pair.  */
-      if (use_code == MINUS_EXPR && !negate_p
-         && gimple_assign_rhs1 (use_stmt) == result
+      if (code == MINUS_EXPR
+         && !negate_p
+         && ops[0] == result
          && !direct_internal_fn_supported_p (IFN_FMS, type, opt_type)
-         && direct_internal_fn_supported_p (IFN_FNMA, type, opt_type))
+         && direct_internal_fn_supported_p (IFN_FNMA, type, opt_type)
+         && TREE_CODE (ops[1]) == SSA_NAME
+         && has_single_use (ops[1]))
        {
-         tree rhs2 = gimple_assign_rhs2 (use_stmt);
-
-         if (TREE_CODE (rhs2) == SSA_NAME)
-           {
-             gimple *stmt2 = SSA_NAME_DEF_STMT (rhs2);
-             if (has_single_use (rhs2)
-                 && is_gimple_assign (stmt2)
-                 && gimple_assign_rhs_code (stmt2) == MULT_EXPR)
-             return false;
-           }
+         gimple *stmt2 = SSA_NAME_DEF_STMT (ops[1]);
+         if (is_gimple_assign (stmt2)
+             && gimple_assign_rhs_code (stmt2) == MULT_EXPR)
+           return false;
        }
 
-      tree use_rhs1 = gimple_assign_rhs1 (use_stmt);
-      tree use_rhs2 = gimple_assign_rhs2 (use_stmt);
       /* We can't handle a * b + a * b.  */
-      if (use_rhs1 == use_rhs2)
+      if (ops[0] == ops[1])
        return false;
       /* If deferring, make sure we are not looking at an instruction that
         wouldn't have existed if we were not.  */
       if (state->m_deferring_p
-         && (state->m_mul_result_set.contains (use_rhs1)
-             || state->m_mul_result_set.contains (use_rhs2)))
+         && (state->m_mul_result_set.contains (ops[0])
+             || state->m_mul_result_set.contains (ops[1])))
        return false;
 
       if (check_defer)
        {
-         tree use_lhs = gimple_assign_lhs (use_stmt);
+         tree use_lhs = gimple_get_lhs (use_stmt);
          if (state->m_last_result)
            {
-             if (use_rhs2 == state->m_last_result
-                 || use_rhs1 == state->m_last_result)
+             if (ops[1] == state->m_last_result
+                 || ops[0] == state->m_last_result)
                defer = true;
              else
                defer = false;
@@ -3009,12 +3040,12 @@ convert_mult_to_fma (gimple *mul_stmt, t
            {
              gcc_checking_assert (!state->m_initial_phi);
              gphi *phi;
-             if (use_rhs1 == result)
-               phi = result_of_phi (use_rhs2);
+             if (ops[0] == result)
+               phi = result_of_phi (ops[1]);
              else
                {
-                 gcc_assert (use_rhs2 == result);
-                 phi = result_of_phi (use_rhs1);
+                 gcc_assert (ops[1] == result);
+                 phi = result_of_phi (ops[0]);
                }
 
              if (phi)
Index: gcc/genmatch.c
===================================================================
--- gcc/genmatch.c      2018-05-16 10:23:03.590853492 +0100
+++ gcc/genmatch.c      2018-05-16 10:23:03.887838686 +0100
@@ -485,6 +485,10 @@ commutative_op (id_base *id)
       case CFN_FNMS:
        return 0;
 
+      case CFN_COND_FMA_REV:
+      case CFN_COND_FNMA_REV:
+       return 2;
+
       default:
        return -1;
       }
Index: gcc/config/aarch64/iterators.md
===================================================================
--- gcc/config/aarch64/iterators.md     2018-05-16 10:23:03.590853492 +0100
+++ gcc/config/aarch64/iterators.md     2018-05-16 10:23:03.886838736 +0100
@@ -449,6 +449,8 @@ (define_c_enum "unspec"
     UNSPEC_COND_AND    ; Used in aarch64-sve.md.
     UNSPEC_COND_ORR    ; Used in aarch64-sve.md.
     UNSPEC_COND_EOR    ; Used in aarch64-sve.md.
+    UNSPEC_COND_FMLA   ; Used in aarch64-sve.md.
+    UNSPEC_COND_FMLS   ; Used in aarch64-sve.md.
     UNSPEC_COND_LT     ; Used in aarch64-sve.md.
     UNSPEC_COND_LE     ; Used in aarch64-sve.md.
     UNSPEC_COND_EQ     ; Used in aarch64-sve.md.
@@ -1499,14 +1501,16 @@ (define_int_iterator UNPACK_UNSIGNED [UN
 
 (define_int_iterator MUL_HIGHPART [UNSPEC_SMUL_HIGHPART UNSPEC_UMUL_HIGHPART])
 
-(define_int_iterator SVE_COND_INT_OP [UNSPEC_COND_ADD UNSPEC_COND_SUB
-                                     UNSPEC_COND_SMAX UNSPEC_COND_UMAX
-                                     UNSPEC_COND_SMIN UNSPEC_COND_UMIN
-                                     UNSPEC_COND_AND
-                                     UNSPEC_COND_ORR
-                                     UNSPEC_COND_EOR])
+(define_int_iterator SVE_COND_INT2_OP [UNSPEC_COND_ADD UNSPEC_COND_SUB
+                                      UNSPEC_COND_SMAX UNSPEC_COND_UMAX
+                                      UNSPEC_COND_SMIN UNSPEC_COND_UMIN
+                                      UNSPEC_COND_AND
+                                      UNSPEC_COND_ORR
+                                      UNSPEC_COND_EOR])
 
-(define_int_iterator SVE_COND_FP_OP [UNSPEC_COND_ADD UNSPEC_COND_SUB])
+(define_int_iterator SVE_COND_FP2_OP [UNSPEC_COND_ADD UNSPEC_COND_SUB])
+
+(define_int_iterator SVE_COND_FP3_OP [UNSPEC_COND_FMLA UNSPEC_COND_FMLS])
 
 (define_int_iterator SVE_COND_FP_CMP [UNSPEC_COND_LT UNSPEC_COND_LE
                                      UNSPEC_COND_EQ UNSPEC_COND_NE
@@ -1543,7 +1547,9 @@ (define_int_attr optab [(UNSPEC_ANDF "an
                        (UNSPEC_COND_UMIN "umin")
                        (UNSPEC_COND_AND "and")
                        (UNSPEC_COND_ORR "ior")
-                       (UNSPEC_COND_EOR "xor")])
+                       (UNSPEC_COND_EOR "xor")
+                       (UNSPEC_COND_FMLA "fma_rev")
+                       (UNSPEC_COND_FMLS "fnma_rev")])
 
 (define_int_attr  maxmin_uns [(UNSPEC_UMAXV "umax")
                              (UNSPEC_UMINV "umin")
@@ -1762,4 +1768,6 @@ (define_int_attr sve_int_op [(UNSPEC_CON
                             (UNSPEC_COND_EOR "eor")])
 
 (define_int_attr sve_fp_op [(UNSPEC_COND_ADD "fadd")
-                           (UNSPEC_COND_SUB "fsub")])
+                           (UNSPEC_COND_SUB "fsub")
+                           (UNSPEC_COND_FMLA "fmla")
+                           (UNSPEC_COND_FMLS "fmls")])
Index: gcc/config/aarch64/aarch64-sve.md
===================================================================
--- gcc/config/aarch64/aarch64-sve.md   2018-05-16 10:23:03.590853492 +0100
+++ gcc/config/aarch64/aarch64-sve.md   2018-05-16 10:23:03.883838885 +0100
@@ -1764,7 +1764,7 @@ (define_insn "cond_<optab><mode>"
          [(match_operand:<VPRED> 1 "register_operand" "Upl")
           (match_operand:SVE_I 2 "register_operand" "0")
           (match_operand:SVE_I 3 "register_operand" "w")]
-         SVE_COND_INT_OP))]
+         SVE_COND_INT2_OP))]
   "TARGET_SVE"
   "<sve_int_op>\t%0.<Vetype>, %1/m, %0.<Vetype>, %3.<Vetype>"
 )
@@ -2543,11 +2543,23 @@ (define_insn "cond_<optab><mode>"
          [(match_operand:<VPRED> 1 "register_operand" "Upl")
           (match_operand:SVE_F 2 "register_operand" "0")
           (match_operand:SVE_F 3 "register_operand" "w")]
-         SVE_COND_FP_OP))]
+         SVE_COND_FP2_OP))]
   "TARGET_SVE"
   "<sve_fp_op>\t%0.<Vetype>, %1/m, %0.<Vetype>, %3.<Vetype>"
 )
 
+(define_insn "cond_<optab><mode>"
+  [(set (match_operand:SVE_F 0 "register_operand" "=w")
+       (unspec:SVE_F
+         [(match_operand:<VPRED> 1 "register_operand" "Upl")
+          (match_operand:SVE_F 2 "register_operand" "0")
+          (match_operand:SVE_F 3 "register_operand" "w")
+          (match_operand:SVE_F 4 "register_operand" "w")]
+         SVE_COND_FP3_OP))]
+  "TARGET_SVE"
+  "<sve_fp_op>\t%0.<Vetype>, %1/m, %3.<Vetype>, %4.<Vetype>"
+)
+
 ;; Shift an SVE vector left and insert a scalar into element 0.
 (define_insn "vec_shl_insert_<mode>"
   [(set (match_operand:SVE_ALL 0 "register_operand" "=w, w")
Index: gcc/testsuite/gcc.target/aarch64/sve/reduc_4.c
===================================================================
--- /dev/null   2018-04-20 16:19:46.369131350 +0100
+++ gcc/testsuite/gcc.target/aarch64/sve/reduc_4.c      2018-05-16 
10:23:03.888838636 +0100
@@ -0,0 +1,18 @@
+/* { dg-do compile } */
+/* { dg-options "-O2 -ftree-vectorize -ffast-math" } */
+
+double
+f (double *restrict a, double *restrict b, int *lookup)
+{
+  double res = 0.0;
+  for (int i = 0; i < 512; ++i)
+    res += a[lookup[i]] * b[i];
+  return res;
+}
+
+/* { dg-final { scan-assembler-times {\tfmla\tz[0-9]+.d, p[0-7]/m, } 2 } } */
+/* Check that the vector instructions are the only instructions.  */
+/* { dg-final { scan-assembler-times {\tfmla\t} 2 } } */
+/* { dg-final { scan-assembler-not {\tfadd\t} } } */
+/* { dg-final { scan-assembler-times {\tfaddv\td0,} 1 } } */
+/* { dg-final { scan-assembler-not {\tsel\t} } } */
Index: gcc/testsuite/gcc.target/aarch64/sve/reduc_6.c
===================================================================
--- /dev/null   2018-04-20 16:19:46.369131350 +0100
+++ gcc/testsuite/gcc.target/aarch64/sve/reduc_6.c      2018-05-16 
10:23:03.888838636 +0100
@@ -0,0 +1,17 @@
+/* { dg-do compile } */
+/* { dg-options "-O2 -ftree-vectorize -ffast-math" } */
+
+#define REDUC(TYPE)                                            \
+  TYPE reduc_##TYPE (TYPE *x, TYPE *y, int count)              \
+  {                                                            \
+    TYPE sum = 0;                                              \
+    for (int i = 0; i < count; ++i)                            \
+      sum += x[i] * y[i];                                      \
+    return sum;                                                        \
+  }
+
+REDUC (float)
+REDUC (double)
+
+/* { dg-final { scan-assembler-times {\tfmla\tz[0-9]+\.s, p[0-7]/m} 1 } } */
+/* { dg-final { scan-assembler-times {\tfmla\tz[0-9]+\.d, p[0-7]/m} 1 } } */
Index: gcc/testsuite/gcc.target/aarch64/sve/reduc_7.c
===================================================================
--- /dev/null   2018-04-20 16:19:46.369131350 +0100
+++ gcc/testsuite/gcc.target/aarch64/sve/reduc_7.c      2018-05-16 
10:23:03.889838586 +0100
@@ -0,0 +1,17 @@
+/* { dg-do compile } */
+/* { dg-options "-O2 -ftree-vectorize -ffast-math" } */
+
+#define REDUC(TYPE)                                            \
+  TYPE reduc_##TYPE (TYPE *x, TYPE *y, int count)              \
+  {                                                            \
+    TYPE sum = 0;                                              \
+    for (int i = 0; i < count; ++i)                            \
+      sum -= x[i] * y[i];                                      \
+    return sum;                                                        \
+  }
+
+REDUC (float)
+REDUC (double)
+
+/* { dg-final { scan-assembler-times {\tfmls\tz[0-9]+\.s, p[0-7]/m} 1 } } */
+/* { dg-final { scan-assembler-times {\tfmls\tz[0-9]+\.d, p[0-7]/m} 1 } } */

Reply via email to