and patch:
diff --git a/gcc/config/arm/arm.h b/gcc/config/arm/arm.h
index
47216b4a1959ccdb18e329db411bf7f941e67163..f42e996e5a7ce979fe406b8261d50fb2ba005f6b
100644
--- a/gcc/config/arm/arm.h
+++ b/gcc/config/arm/arm.h
@@ -269,7 +269,7 @@ extern void (*arm_lang_output_object_attributes_hook)
(void);
#define TARGET_HAVE_LDACQ (TARGET_ARM_ARCH >= 8 && arm_arch_notm)
/* Nonzero if this chip provides the movw and movt instructions. */
-#define TARGET_HAVE_MOVT (arm_arch_thumb2)
+#define TARGET_HAVE_MOVT (arm_arch_thumb2 || arm_arch8)
/* Nonzero if integer division instructions supported. */
#define TARGET_IDIV ((TARGET_ARM && arm_arch_arm_hwdiv) \
diff --git a/gcc/config/arm/arm.c b/gcc/config/arm/arm.c
index
d75a34f10d5ed22cff0a0b5d3ad433f111b059ee..a05e559c905daa55e686491a038342360c721912
100644
--- a/gcc/config/arm/arm.c
+++ b/gcc/config/arm/arm.c
@@ -8220,6 +8220,12 @@ arm_legitimate_constant_p_1 (machine_mode, rtx x)
static bool
thumb_legitimate_constant_p (machine_mode mode ATTRIBUTE_UNUSED, rtx x)
{
+ /* Splitters for TARGET_USE_MOVT call arm_emit_movpair which creates high
+ RTX. These RTX must therefore be allowed for Thumb-1 so that when run
+ for ARMv8-M baseline or later the result is valid. */
+ if (TARGET_HAVE_MOVT && GET_CODE (x) == HIGH)
+ x = XEXP (x, 0);
+
return (CONST_INT_P (x)
|| CONST_DOUBLE_P (x)
|| CONSTANT_ADDRESS_P (x)
@@ -8306,7 +8312,8 @@ thumb1_rtx_costs (rtx x, enum rtx_code code, enum
rtx_code outer)
case CONST_INT:
if (outer == SET)
{
- if ((unsigned HOST_WIDE_INT) INTVAL (x) < 256)
+ if (UINTVAL (x) < 256
+ || (TARGET_HAVE_MOVT && !(INTVAL (x) & 0xffff0000)))
return 0;
if (thumb_shiftable_const (INTVAL (x)))
return COSTS_N_INSNS (2);
@@ -9009,7 +9016,7 @@ static inline int
thumb1_size_rtx_costs (rtx x, enum rtx_code code, enum rtx_code outer)
{
machine_mode mode = GET_MODE (x);
- int words;
+ int words, cost;
switch (code)
{
@@ -9055,17 +9062,26 @@ thumb1_size_rtx_costs (rtx x, enum rtx_code code, enum
rtx_code outer)
/* A SET doesn't have a mode, so let's look at the SET_DEST to get
the mode. */
words = ARM_NUM_INTS (GET_MODE_SIZE (GET_MODE (SET_DEST (x))));
- return COSTS_N_INSNS (words)
- + COSTS_N_INSNS (1) * (satisfies_constraint_J (SET_SRC (x))
- || satisfies_constraint_K (SET_SRC (x))
- /* thumb1_movdi_insn. */
- || ((words > 1) && MEM_P (SET_SRC (x))));
+ cost = COSTS_N_INSNS (words);
+ if (satisfies_constraint_J (SET_SRC (x))
+ || satisfies_constraint_K (SET_SRC (x))
+ /* Too big immediate for 2byte mov, using movt. */
+ || (UINTVAL (SET_SRC (x)) >= 256
+ && TARGET_HAVE_MOVT
+ && satisfies_constraint_j (SET_SRC (x)))
+ /* thumb1_movdi_insn. */
+ || ((words > 1) && MEM_P (SET_SRC (x))))
+ cost += COSTS_N_INSNS (1);
+ return cost;
case CONST_INT:
if (outer == SET)
{
if ((unsigned HOST_WIDE_INT) INTVAL (x) < 256)
return COSTS_N_INSNS (1);
+ /* movw is 4byte long. */
+ if (TARGET_HAVE_MOVT && !(INTVAL (x) & 0xffff0000))
+ return COSTS_N_INSNS (2);
/* See split "TARGET_THUMB1 && satisfies_constraint_J". */
if (INTVAL (x) >= -255 && INTVAL (x) <= -1)
return COSTS_N_INSNS (2);
diff --git a/gcc/config/arm/arm.md b/gcc/config/arm/arm.md
index
8aa9fedf5c07e78bc7ba793b39bebcc45a4d5921..ce39bdf5904dec3e12003c411f2a8b326ea939e3
100644
--- a/gcc/config/arm/arm.md
+++ b/gcc/config/arm/arm.md
@@ -118,10 +118,10 @@
; This can be "a" for ARM, "t" for either of the Thumbs, "32" for
; TARGET_32BIT, "t1" or "t2" to specify a specific Thumb mode. "v6"
; for ARM or Thumb-2 with arm_arch6, and nov6 for ARM without
-; arm_arch6. "v6t2" for Thumb-2 with arm_arch6. This attribute is
-; used to compute attribute "enabled", use type "any" to enable an
-; alternative in all cases.
-(define_attr "arch"
"any,a,t,32,t1,t2,v6,nov6,v6t2,neon_for_64bits,avoid_neon_for_64bits,iwmmxt,iwmmxt2,armv6_or_vfpv3,neon"
+; arm_arch6. "v6t2" for Thumb-2 with arm_arch6 and v8mb for ARMv8-M
+; baseline. This attribute is used to compute attribute "enabled",
+; use type "any" to enable an alternative in all cases.
+(define_attr "arch"
"any,a,t,32,t1,t2,v6,nov6,v6t2,v8mb,neon_for_64bits,avoid_neon_for_64bits,iwmmxt,iwmmxt2,armv6_or_vfpv3,neon"
(const_string "any"))
(define_attr "arch_enabled" "no,yes"
@@ -160,6 +160,10 @@
(match_test "TARGET_32BIT && arm_arch6 && arm_arch_thumb2"))
(const_string "yes")
+ (and (eq_attr "arch" "v8mb")
+ (match_test "TARGET_THUMB1 && arm_arch8"))
+ (const_string "yes")
+
(and (eq_attr "arch" "avoid_neon_for_64bits")
(match_test "TARGET_NEON")
(not (match_test "TARGET_PREFER_NEON_64BITS")))
diff --git a/gcc/config/arm/thumb1.md b/gcc/config/arm/thumb1.md
index
072ed4da47ad164eb406bedc3fccc589ac705e9f..47e569d0c259cd17d86a03061e5b47b3dab4579f
100644
--- a/gcc/config/arm/thumb1.md
+++ b/gcc/config/arm/thumb1.md
@@ -590,8 +590,8 @@
;;; ??? The 'i' constraint looks funny, but it should always be replaced by
;;; thumb_reorg with a memory reference.
(define_insn "*thumb1_movdi_insn"
- [(set (match_operand:DI 0 "nonimmediate_operand" "=l,l,l,l,>,l, m,*r")
- (match_operand:DI 1 "general_operand" "l, I,J,>,l,mi,l,*r"))]
+ [(set (match_operand:DI 0 "nonimmediate_operand" "=l,l,l,r,l,>,l, m,*r")
+ (match_operand:DI 1 "general_operand" "l, I,J,j,>,l,mi,l,*r"))]
"TARGET_THUMB1
&& ( register_operand (operands[0], DImode)
|| register_operand (operands[1], DImode))"
@@ -609,37 +609,41 @@
case 2:
operands[1] = GEN_INT (- INTVAL (operands[1]));
return \"movs\\t%Q0, %1\;rsbs\\t%Q0, %Q0, #0\;asrs\\t%R0, %Q0, #31\";
- case 3:
- return \"ldmia\\t%1, {%0, %H0}\";
+ case 3: gcc_assert (TARGET_HAVE_MOVT);
+ return \"movw\\t%Q0, %L1\;movs\\tR0, #0\";
case 4:
- return \"stmia\\t%0, {%1, %H1}\";
+ return \"ldmia\\t%1, {%0, %H0}\";
case 5:
- return thumb_load_double_from_address (operands);
+ return \"stmia\\t%0, {%1, %H1}\";
case 6:
+ return thumb_load_double_from_address (operands);
+ case 7:
operands[2] = gen_rtx_MEM (SImode,
plus_constant (Pmode, XEXP (operands[0], 0), 4));
output_asm_insn (\"str\\t%1, %0\;str\\t%H1, %2\", operands);
return \"\";
- case 7:
+ case 8:
if (REGNO (operands[1]) == REGNO (operands[0]) + 1)
return \"mov\\t%0, %1\;mov\\t%H0, %H1\";
return \"mov\\t%H0, %H1\;mov\\t%0, %1\";
}
}"
- [(set_attr "length" "4,4,6,2,2,6,4,4")
- (set_attr "type"
"multiple,multiple,multiple,load2,store2,load2,store2,multiple")
- (set_attr "pool_range" "*,*,*,*,*,1018,*,*")]
+ [(set_attr "length" "4,4,6,6,2,2,6,4,4")
+ (set_attr "type"
"multiple,multiple,multiple,multiple,load2,store2,load2,store2,multiple")
+ (set_attr "arch" "t1,t1,t1,v8mb,t1,t1,t1,t1,t1")
+ (set_attr "pool_range" "*,*,*,*,*,*,1018,*,*")]
)
(define_insn "*thumb1_movsi_insn"
- [(set (match_operand:SI 0 "nonimmediate_operand" "=l,l,l,l,l,>,l,
m,*l*h*k")
- (match_operand:SI 1 "general_operand" "l, I,J,K,>,l,mi,l,*l*h*k"))]
+ [(set (match_operand:SI 0 "nonimmediate_operand" "=l,l,r,l,l,l,>,l,
m,*l*h*k")
+ (match_operand:SI 1 "general_operand" "l,
I,j,J,K,>,l,mi,l,*l*h*k"))]
"TARGET_THUMB1
&& ( register_operand (operands[0], SImode)
|| register_operand (operands[1], SImode))"
"@
movs %0, %1
movs %0, %1
+ movw %0, %1
#
#
ldmia\\t%1, {%0}
@@ -647,10 +651,11 @@
ldr\\t%0, %1
str\\t%1, %0
mov\\t%0, %1"
- [(set_attr "length" "2,2,4,4,2,2,2,2,2")
- (set_attr "type"
"mov_reg,mov_imm,multiple,multiple,load1,store1,load1,store1,mov_reg")
- (set_attr "pool_range" "*,*,*,*,*,*,1018,*,*")
- (set_attr "conds" "set,clob,*,*,nocond,nocond,nocond,nocond,nocond")])
+ [(set_attr "length" "2,2,4,4,4,2,2,2,2,2")
+ (set_attr "type"
"mov_reg,mov_imm,mov_imm,multiple,multiple,load1,store1,load1,store1,mov_reg")
+ (set_attr "pool_range" "*,*,*,*,*,*,*,1018,*,*")
+ (set_attr "arch" "t1,t1,v8mb,t1,t1,t1,t1,t1,t1,t1")
+ (set_attr "conds"
"set,clob,nocond,*,*,nocond,nocond,nocond,nocond,nocond")])
; Split the load of 64-bit constant into two loads for high and low 32-bit
parts respectively
; to see if we can load them in fewer instructions or fewer cycles.
@@ -687,7 +692,8 @@
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(match_operand:SI 1 "const_int_operand" ""))]
- "TARGET_THUMB1 && satisfies_constraint_K (operands[1])"
+ "TARGET_THUMB1 && satisfies_constraint_K (operands[1])
+ && !(TARGET_HAVE_MOVT && satisfies_constraint_j (operands[1]))"
[(set (match_dup 2) (match_dup 1))
(set (match_dup 0) (ashift:SI (match_dup 2) (match_dup 3)))]
"
@@ -714,7 +720,8 @@
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(match_operand:SI 1 "const_int_operand" ""))]
- "TARGET_THUMB1 && satisfies_constraint_Pe (operands[1])"
+ "TARGET_THUMB1 && satisfies_constraint_Pe (operands[1])
+ && !(TARGET_HAVE_MOVT && satisfies_constraint_j (operands[1]))"
[(set (match_dup 2) (match_dup 1))
(set (match_dup 0) (plus:SI (match_dup 2) (match_dup 3)))]
"
@@ -726,8 +733,8 @@
)
(define_insn "*thumb1_movhi_insn"
- [(set (match_operand:HI 0 "nonimmediate_operand" "=l,l,m,l*r,*h,l")
- (match_operand:HI 1 "general_operand" "l,m,l,k*h,*r,I"))]
+ [(set (match_operand:HI 0 "nonimmediate_operand" "=l,l,m,l*r,*h,l,r")
+ (match_operand:HI 1 "general_operand" "l,m,l,k*h,*r,I,n"))]
"TARGET_THUMB1
&& ( register_operand (operands[0], HImode)
|| register_operand (operands[1], HImode))"
@@ -739,6 +746,8 @@
case 3: return \"mov %0, %1\";
case 4: return \"mov %0, %1\";
case 5: return \"movs %0, %1\";
+ case 6: gcc_assert (TARGET_HAVE_MOVT);
+ return \"movw %0, %L1\";
default: gcc_unreachable ();
case 1:
/* The stack pointer can end up being taken as an index register.
@@ -758,9 +767,10 @@
}
return \"ldrh %0, %1\";
}"
- [(set_attr "length" "2,4,2,2,2,2")
- (set_attr "type" "alus_imm,load1,store1,mov_reg,mov_reg,mov_imm")
- (set_attr "conds" "clob,nocond,nocond,nocond,nocond,clob")])
+ [(set_attr "length" "2,4,2,2,2,2,4")
+ (set_attr "type" "alus_imm,load1,store1,mov_reg,mov_reg,mov_imm,mov_imm")
+ (set_attr "arch" "t1,t1,t1,t1,t1,t1,v8mb")
+ (set_attr "conds" "clob,nocond,nocond,nocond,nocond,clob,nocond")])
(define_expand "thumb_movhi_clobber"
[(set (match_operand:HI 0 "memory_operand" "")
diff --git a/gcc/doc/sourcebuild.texi b/gcc/doc/sourcebuild.texi
index
3142cd53ae53e90bb1af2f595fe53778c1cbfd3b..860b4c0627e094bae8b3801f9256ff4fec5c8fc2
100644
--- a/gcc/doc/sourcebuild.texi
+++ b/gcc/doc/sourcebuild.texi
@@ -1601,6 +1601,10 @@ arm_v8_1a_neon_ok.
ARM target prefers @code{LDRD} and @code{STRD} instructions over
@code{LDM} and @code{STM} instructions.
+@item arm_thumb1_movt_ko
+ARM target generates Thumb-1 code for @code{-mthumb} with no
+@code{MOVT} instruction available.
+
@end table
@subsubsection AArch64-specific attributes
diff --git a/gcc/testsuite/gcc.target/arm/pr42574.c
b/gcc/testsuite/gcc.target/arm/pr42574.c
index
0ccd05f9922c798611e479d97890aa69b180e989..53aea6224be89d2d771a22f8ecb397276f586234
100644
--- a/gcc/testsuite/gcc.target/arm/pr42574.c
+++ b/gcc/testsuite/gcc.target/arm/pr42574.c
@@ -1,5 +1,5 @@
/* { dg-options "-mthumb -Os -fpic" } */
-/* { dg-require-effective-target arm_thumb1_ok } */
+/* { dg-require-effective-target arm_thumb1_movt_ko } */
/* { dg-require-effective-target fpic } */
/* Make sure the address of glob.c is calculated only once and using
a logical shift for the offset (200<<1). */
diff --git a/gcc/testsuite/lib/target-supports.exp b/gcc/testsuite/lib/target-
supports.exp
index
46352b90de7202960116d93523b017d5dc4a1423..f5d73ad2620fa35f0091a890bca63c7d35de1a85
100644
--- a/gcc/testsuite/lib/target-supports.exp
+++ b/gcc/testsuite/lib/target-supports.exp
@@ -3329,6 +3329,23 @@ proc check_effective_target_arm_cortex_m { } {
} "-mthumb"]
}
+# Return 1 if this is an ARM target where -mthumb causes Thumb-1 to be
+# used and no movt/movw instructions to be available.
+
+proc check_effective_target_arm_thumb1_movt_ko {} {
+ if [check_effective_target_arm_thumb1_ok] {
+ return [expr ![check_no_compiler_messages arm_movt object {
+ int
+ foo (void)
+ {
+ asm ("movt r0, #42");
+ }
+ } "-mthumb"]]
+ } else {
+ return 0
+ }
+}
+
# Return 1 if this compilation turns on string_ops_prefer_neon on.
proc check_effective_target_arm_tune_string_ops_prefer_neon { } {
Best regards,
Thomas
On 17/05/16 11:13, Thomas Preudhomme wrote:
Ping?
*** gcc/ChangeLog ***
2015-11-13 Thomas Preud'homme <thomas.preudho...@arm.com>
* config/arm/arm.h (TARGET_HAVE_MOVT): Include ARMv8-M as having
MOVT.
* config/arm/arm.c (arm_arch_name): (const_ok_for_op): Check
MOVT/MOVW
availability with TARGET_HAVE_MOVT.
(thumb_legitimate_constant_p): Legalize high part of a label_ref
as a
constant.
I don't think "Legalize" is the right word here. How about "Strip the HIGH
part of a label_ref"?
(thumb1_rtx_costs): Also return 0 if setting a half word constant
and
movw is available.
(thumb1_size_rtx_costs): Make set of half word constant also cost
1
extra instruction if MOVW is available. Make constant with
bottom
half
word zero cost 2 instruction if MOVW is available.
* config/arm/arm.md (define_attr "arch"): Add v8mb.
(define_attr "arch_enabled"): Set to yes if arch value is v8mb
and
target is ARMv8-M Baseline.
* config/arm/thumb1.md (thumb1_movdi_insn): Add ARMv8-M Baseline
only
alternative for constants satisfying j constraint.
(thumb1_movsi_insn): Likewise.
(movsi splitter for K alternative): Tighten condition to not
trigger
if movt is available and j constraint is satisfied.
(Pe immediate splitter): Likewise.
(thumb1_movhi_insn): Add ARMv8-M Baseline only alternative for
constant fitting in an halfword to use movw.
Please use 'MOVW' consistently in the ChangeLog rather than the lowercase
'movw'
* doc/sourcebuild.texi (arm_thumb1_movt_ko): Document new ARM
effective target.
*** gcc/testsuite/ChangeLog ***
2015-11-13 Thomas Preud'homme <thomas.preudho...@arm.com>
* lib/target-supports.exp
(check_effective_target_arm_thumb1_movt_ko):
Define effective target.
* gcc.target/arm/pr42574.c: Require arm_thumb1_movt_ko instead of
arm_thumb1_ok as effective target to exclude ARMv8-M Baseline.
diff --git a/gcc/config/arm/arm.h b/gcc/config/arm/arm.h
index
47216b4a1959ccdb18e329db411bf7f941e67163..f42e996e5a7ce979fe406b8261d50fb2
ba005f6b 100644
--- a/gcc/config/arm/arm.h
+++ b/gcc/config/arm/arm.h
@@ -269,7 +269,7 @@ extern void (*arm_lang_output_object_attributes_hook)
(void);
#define TARGET_HAVE_LDACQ (TARGET_ARM_ARCH >= 8 && arm_arch_notm)
/* Nonzero if this chip provides the movw and movt instructions. */
-#define TARGET_HAVE_MOVT (arm_arch_thumb2)
+#define TARGET_HAVE_MOVT (arm_arch_thumb2 || arm_arch8)
/* Nonzero if integer division instructions supported. */
#define TARGET_IDIV ((TARGET_ARM && arm_arch_arm_hwdiv) \
diff --git a/gcc/config/arm/arm.c b/gcc/config/arm/arm.c
index
d75a34f10d5ed22cff0a0b5d3ad433f111b059ee..13b4b71ac8f9c1da8ef1945f7ff6985c
a59f6832 100644
--- a/gcc/config/arm/arm.c
+++ b/gcc/config/arm/arm.c
@@ -8220,6 +8220,12 @@ arm_legitimate_constant_p_1 (machine_mode, rtx x)
static bool
thumb_legitimate_constant_p (machine_mode mode ATTRIBUTE_UNUSED, rtx x)
{
+ /* Splitters for TARGET_USE_MOVT call arm_emit_movpair which creates
high + RTX. These RTX must therefore be allowed for Thumb-1 so that
when run + for ARMv8-M baseline or later the result is valid. */
+ if (TARGET_HAVE_MOVT && GET_CODE (x) == HIGH)
+ x = XEXP (x, 0);
+
return (CONST_INT_P (x)
|| CONST_DOUBLE_P (x)
|| CONSTANT_ADDRESS_P (x)
@@ -8306,7 +8312,8 @@ thumb1_rtx_costs (rtx x, enum rtx_code code, enum
rtx_code outer)
case CONST_INT:
if (outer == SET)
{
- if ((unsigned HOST_WIDE_INT) INTVAL (x) < 256)
+ if ((unsigned HOST_WIDE_INT) INTVAL (x) < 256
+ || (TARGET_HAVE_MOVT && !(INTVAL (x) & 0xffff0000)))
return 0;
Since you're modifying this line please replace (unsigned HOST_WIDE_INT)
INTVAL (x) with UINTVAL (x).
