http://gcc.gnu.org/bugzilla/show_bug.cgi?id=49573
Summary: wrong rtl pre transformation
Product: gcc
Version: 4.6.0
Status: UNCONFIRMED
Severity: normal
Priority: P3
Component: rtl-optimization
AssignedTo: [email protected]
ReportedBy: [email protected]
Host: linux
Target: arm-unknown-linux-gnueabi
Created attachment 24626
--> http://gcc.gnu.org/bugzilla/attachment.cgi?id=24626
testcase
The attached testcase is extracted from skia.
Check out gcc source from gcc4.6 branch earlier than r175024, configured as
arm-unknown-linux-gnueabi and build it. Compile the attached testcase with
options -march=armv7-a -O2 -fno-exceptions, it generates the following code:
_ZN12SkGlyphCache10VisitCacheEPK12SkDescriptor:
@ args = 0, pretend = 0, frame = 0
@ frame_needed = 0, uses_anonymous_args = 0
stmfd sp!, {r3, r4, r5, r6, r7, lr}
mov r5, r0
ldr r6, .L17
ldr r0, [r6, #0]
bl _Z3fooi
ldr r4, [r6, #4]
cmp r4, #0
beq .L2
.L11:
ldr r1, [r4, #8]
mov r2, r5
ldr ip, [r1, #4]
mov r3, r1
add ip, r1, ip
.L4:
ldr r0, [r3], #4
ldr r1, [r2], #4
cmp r0, r1
bne .L3
cmp ip, r3
bhi .L4
ldr r3, [r4, #4]
cmp r3, #0
beq .L16 // A
ldr r2, [r4, #0]
str r2, [r3, #0]
ldr r7, [r4, #0]
.L8:
cmp r7, #0 // B
mov r0, r4
ldrne r3, [r4, #4]
strne r3, [r7, #4]
mov r3, #0
str r3, [r4, #0]
str r3, [r4, #4]
ldmfd sp!, {r3, r4, r5, r6, r7, pc}
.L3:
ldr r4, [r4, #0]
cmp r4, #0
bne .L11
.L2:
.L10:
mov r0, #12
bl _Znwj
mov r4, r0
bl _ZN12SkGlyphCacheC1Ev
mov r0, r4
ldmfd sp!, {r3, r4, r5, r6, r7, pc}
.L16:
ldr r3, [r4, #0]
str r3, [r6, #4]
b .L8
.L18:
.align 2
.L17:
.word gGCGlobals
Note that when the branch instruction A is taken, and later branch to L8,
register r7 will not contain any meaningful value, so instruction B is
unpredictable, and these are incorrect codes.
The culprit is rtl pre pass. Before pre, we have:
...
778 (note 116 107 117 8 [bb 8] NOTE_INSN_BASIC_BLOCK)
779
780 (insn 117 116 118 8 (set (reg/f:SI 201 [ D.1864 ])
781 (mem/f:SI (reg/v/f:SI 196 [ cache ]) [4 MEM[(struct SkGlyphCache *
*)cache_51]+0 S4 A32])) SkGlyphCache.ii:26
168 {*arm_movsi_insn}
782 (nil))
783
784 (insn 118 117 121 8 (set (mem/s/f:SI (reg/f:SI 200 [ D.1863 ]) [4
D.1863_32->fNext+0 S4 A32])
785 (reg/f:SI 201 [ D.1864 ])) SkGlyphCache.ii:26 168 {*arm_movsi_insn}
786 (expr_list:REG_DEAD (reg/f:SI 201 [ D.1864 ])
787 (expr_list:REG_DEAD (reg/f:SI 200 [ D.1863 ])
788 (nil))))
789 790 (code_label 121 118 122 9 7 "" [1 uses])
791
792 (note 122 121 123 9 [bb 9] NOTE_INSN_BASIC_BLOCK)
793
794 (insn 123 122 125 9 (set (reg/f:SI 202 [ D.1864 ])
795 (mem/f:SI (reg/v/f:SI 196 [ cache ]) [4 MEM[(struct SkGlyphCache *
*)cache_51]+0 S4 A32])) SkGlyphCache.ii:28
168 {*arm_movsi_insn}
796 (nil))
797
798 (insn 125 123 126 9 (set (reg/f:SI 220)
799 (symbol_ref:SI ("gGCGlobals") [flags 0xc0] <var_decl
0x7f90256e8320 gGCGlobals>)) SkGlyphCache.ii:28 168 {*ar
m_movsi_insn}
800 (expr_list:REG_EQUAL (symbol_ref:SI ("gGCGlobals") [flags 0xc0]
<var_decl 0x7f90256e8320 gGCGlobals>)
801 (nil)))
802
803 (insn 126 125 127 9 (set (mem/s/f/c:SI (plus:SI (reg/f:SI 220)
804 (const_int 4 [0x4])) [4 gGCGlobals.fHead+0 S4 A32])
805 (reg/f:SI 202 [ D.1864 ])) SkGlyphCache.ii:28 168 {*arm_movsi_insn}
806 (expr_list:REG_DEAD (reg/f:SI 220)
807 (expr_list:REG_DEAD (reg/f:SI 202 [ D.1864 ])
808 (nil))))
809
810 (code_label 127 126 128 10 8 "" [0 uses])
811
812 (note 128 127 129 10 [bb 10] NOTE_INSN_BASIC_BLOCK)
813
814 (insn 129 128 130 10 (set (reg/f:SI 203 [ D.1864 ])
815 (mem/f:SI (reg/v/f:SI 196 [ cache ]) [4 MEM[(struct SkGlyphCache *
*)cache_51]+0 S4 A32])) SkGlyphCache.ii:30 168 {*arm_movsi_insn}
816 (nil))
817
818 (insn 130 129 131 10 (set (reg:CC 24 cc)
819 (compare:CC (reg/f:SI 203 [ D.1864 ])
820 (const_int 0 [0]))) SkGlyphCache.ii:30 198 {*arm_cmpsi_insn}
821 (nil))
822
...
bb8 and bb9 are predecessors of bb10. insn 129 is fully redundant to insn 117
and 123. But gcc failed to identify this, instead it identified insn 129 is
partial redundant to insn 123. This is still OK. But it did wrong
transformation. It adds a new instruction to load the memory into a new
register r225 at the end of bb8, and modifies the first instruction of bb10 to
move r225 to old register. But it doesn't touch bb9, so if control flows from
bb9 to bb10, the new register r225 contains no meaningful value.
...
286 (note 116 107 117 8 [bb 8] NOTE_INSN_BASIC_BLOCK)
287
288 (insn 117 116 118 8 (set (reg/f:SI 201 [ D.1864 ])
289 (mem/f:SI (reg/v/f:SI 196 [ cache ]) [4 MEM[(struct SkGlyphCache *
*)cache_51]+0 S4 A32])) SkGlyphCache.ii:26 168 {*arm_movsi_insn}
290 (nil))
291
292 (insn 118 117 185 8 (set (mem/s/f:SI (reg/f:SI 200 [ D.1863 ]) [4
D.1863_32->fNext+0 S4 A32])
293 (reg/f:SI 201 [ D.1864 ])) SkGlyphCache.ii:26 168 {*arm_movsi_insn}
294 (expr_list:REG_DEAD (reg/f:SI 201 [ D.1864 ])
295 (expr_list:REG_DEAD (reg/f:SI 200 [ D.1863 ])
296 (nil))))
297
298 (insn 185 118 121 8 (set (reg/f:SI 225 [ D.1864 ])
299 (mem/s/f:SI (reg/v/f:SI 196 [ cache ]) [4 cache_31->fNext+0 S4
A32])) -1
300 (nil))
301
302 (code_label 121 185 122 9 7 "" [1 uses])
303
304 (note 122 121 123 9 [bb 9] NOTE_INSN_BASIC_BLOCK)
305
306 (insn 123 122 183 9 (set (reg/f:SI 202 [ D.1864 ])
307 (mem/f:SI (reg/v/f:SI 196 [ cache ]) [4 MEM[(struct SkGlyphCache *
*)cache_51]+0 S4 A32])) SkGlyphCache.ii:28 168 {*arm_movsi_insn}
308 (nil))
309
310 (insn 183 123 126 9 (set (reg/f:SI 220)
311 (reg/f:SI 224)) SkGlyphCache.ii:28 -1
312 (expr_list:REG_EQUAL (symbol_ref:SI ("gGCGlobals") [flags 0xc0]
<var_decl 0x7f90256e8320 gGCGlobals>)
313 (nil)))
314
315 (insn 126 183 127 9 (set (mem/s/f/c:SI (plus:SI (reg/f:SI 220)
316 (const_int 4 [0x4])) [4 gGCGlobals.fHead+0 S4 A32])
317 (reg/f:SI 202 [ D.1864 ])) SkGlyphCache.ii:28 168 {*arm_movsi_insn}
318 (expr_list:REG_DEAD (reg/f:SI 220)
319 (expr_list:REG_DEAD (reg/f:SI 202 [ D.1864 ])
320 (nil))))
321
322 (code_label 127 126 128 10 8 "" [0 uses])
323
324 (note 128 127 184 10 [bb 10] NOTE_INSN_BASIC_BLOCK)
325
326 (insn 184 128 130 10 (set (reg/f:SI 203 [ D.1864 ])
327 (reg/f:SI 225 [ D.1864 ])) SkGlyphCache.ii:30 -1
328 (expr_list:REG_EQUAL (mem/f:SI (reg/v/f:SI 196 [ cache ]) [4
MEM[(struct SkGlyphCache * *)cache_51]+0 S4 A32])
329 (nil)))
330
331 (insn 130 184 131 10 (set (reg:CC 24 cc)
332 (compare:CC (reg/f:SI 203 [ D.1864 ])
333 (const_int 0 [0]))) SkGlyphCache.ii:30 198 {*arm_cmpsi_insn}
334 (nil))
...
I can't reproduce it on top of 4.6 branch because after patch 175024 gcc
doesn't think there is any redundant. Neither can I reproduce it on top of
trunk for similar reason, gcc failed to identify any redundant after patch
171703.
