O meu rc.conf firewall_enable=NO
#defaultrouter="10.0.0.138" gateway_enable="YES" hostname="assessor.lan" network_interfaces="ed0 ed1 lo0" ifconfig_ed0="inet 10.0.0.139 netmask 255.0.0.0 broadcast 10.0.0.255" # media 10BaseT/UTP ifconfig_ed1="inet 192.168.0.1 netmask 255.0.0.0" # media 10BaseT/UTP kern_securelevel_enable="NO" keymap="br275.iso.acc" keyrate="fast" moused_port="/dev/cuaa0" moused_type="microsoft" moused_enable="YES" icmp_bmcastecho="YES" nfs_reserved_port_only="YES" sendmail_enable="YES" sshd_enable="YES" usbd_enable="NO" ppp_enable="YES" ppp_mode="ddial" ppp_nat="NO" ppp_profile="default" ********************************************************************** O meu kernel machine i386 cpu I586_CPU ident GENERIC maxusers 96 options MATH_EMULATE options INET options FFS options FFS_ROOT options SOFTUPDATES options UFS_DIRHASH options MFS options MD_ROOT options NFS options NFS_ROOT options MSDOSFS options CD9660 options CD9660_ROOT options PROCFS options COMPAT_43 options UCONSOLE options USERCONFIG options VISUAL_USERCONFIG options KTRACE options SYSVSHM options SYSVMSG options SYSVSEM options P1003_1B #options _KPOSIX_PRIORITY_SCHEDULING #options KBD_INSTALL_CDEV #options AHC_REG_PRETTY_PRINT #options AHD_REG_PRETTY_PRINT #options PMAP_SHPGPERPROC=201 #options IPFIREWALL #options IPFIREWALL_DEFAULT_TO_ACCEPT #options IPFIREWALL_VERBOSE #options IPFIREWALL_VERBOSE_LIMIT=10 #options IPFIREWALL_FORWARD #options IPDIVERT options IPFILTER options IPFILTER_LOG options TCP_DROP_SYNFIN options ICMP_BANDLIM device isa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 # Placa Ne1000,Ne2000 device miibus device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun 4 # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) pseudo-device speaker #Berkeley packet filter (para funcionar DHCP-BOOT) #pseudo-device bpf ********************************************************************** Espero que isto ajude... Muito Obrigado pela aten��o Grato Alessandro ************************************************************************ Em Qui 13 Mar 2003 14:25, M�rcio Luciano escreveu: > Faz o seguinte envio-nos o eu kernel e o seu rc.conf > T+ > M�rcio > > > _______________________________________________________________ > Sair da Lista: http://www2.fugspbr.org/mailman/listinfo/fugspbr > Historico: http://www4.fugspbr.org/lista/html/FUG-BR/ _______________________________________________________________ Sair da Lista: http://www2.fugspbr.org/mailman/listinfo/fugspbr Historico: http://www4.fugspbr.org/lista/html/FUG-BR/
