On Fri, Aug 29, 2025 at 01:48:20AM +0300, Dmitry Baryshkov wrote: > From: Abhinav Kumar <[email protected]> > > On a vast majority of Qualcomm chipsets DisplayPort controller can > support several MST streams (up to 4x). To support MST these chipsets > use up to 4 stream pixel clocks for the DisplayPort controller and > several extra register regions. Expand corresponding region and clock > bindings for these platforms and fix example schema files to follow > updated bindings. > > Note: On chipsets that support MST, the number of streams supported > can vary between controllers. For example, SA8775P supports 4 MST > streams on mdss_dp0 but only 2 streams on mdss_dp1. > > Signed-off-by: Abhinav Kumar <[email protected]> > Signed-off-by: Jessica Zhang <[email protected]> > Signed-off-by: Dmitry Baryshkov <[email protected]> > --- > .../bindings/display/msm/dp-controller.yaml | 91 > +++++++++++++++++++++- > .../bindings/display/msm/qcom,sa8775p-mdss.yaml | 26 +++++-- > .../bindings/display/msm/qcom,sar2130p-mdss.yaml | 10 ++- > .../bindings/display/msm/qcom,sc7280-mdss.yaml | 3 +- > .../bindings/display/msm/qcom,sm7150-mdss.yaml | 10 ++- > .../bindings/display/msm/qcom,sm8750-mdss.yaml | 10 ++- > .../bindings/display/msm/qcom,x1e80100-mdss.yaml | 10 ++- > 7 files changed, 138 insertions(+), 22 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml > b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml > index > afe01332d66c3c2e6e5848ce3d864079ce71f3cd..8282f3ca45c8b18f159670a7d8c4d9515cdb62ca > 100644 > --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml > +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml > @@ -66,25 +66,37 @@ properties: > - description: link register block > - description: p0 register block > - description: p1 register block > + - description: p2 register block > + - description: p3 register block > + - description: mst2link register block > + - description: mst3link register block > > interrupts: > maxItems: 1 > > clocks: > + minItems: 5 > items: > - description: AHB clock to enable register access > - description: Display Port AUX clock > - description: Display Port Link clock > - description: Link interface clock between DP and PHY > - - description: Display Port Pixel clock > + - description: Display Port stream 0 Pixel clock > + - description: Display Port stream 1 Pixel clock > + - description: Display Port stream 2 Pixel clock > + - description: Display Port stream 3 Pixel clock > > clock-names: > + minItems: 5 > items: > - const: core_iface > - const: core_aux > - const: ctrl_link > - const: ctrl_link_iface > - const: stream_pixel > + - const: stream_1_pixel > + - const: stream_2_pixel > + - const: stream_3_pixel
So this changes explain dependency in "Display enablement changes for Qualcomm QCS8300 platform". Well, heh, I already marked other one as changes requested. It's way too many patches touching the same file. > > phys: > maxItems: 1 > @@ -166,7 +178,6 @@ required: > allOf: > # AUX BUS does not exist on DP controllers > # Audio output also is present only on DP output > - # p1 regions is present on DP, but not on eDP > - if: > properties: > compatible: > @@ -195,11 +206,83 @@ allOf: > else: > properties: > aux-bus: false > - reg: > - minItems: 5 > required: > - "#sound-dai-cells" > > + - if: > + properties: > + compatible: > + contains: > + enum: > + # these platforms support SST only > + - qcom,sc7180-dp > + - qcom,sc7280-dp > + - qcom,sc7280-edp > + - qcom,sc8180x-edp > + - qcom,sc8280xp-edp > + then: > + properties: > + reg: > + minItems: 5 > + maxItems: 5 > + clocks: > + minItems: 5 > + maxItems: 5 You need to restrict clock-names. Same in other places. Best regards, Krzysztof
