The anx7625_link_bridge() checks if a device is not a panel
bridge and add DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT to
the bridge operations. However, on port 1 of the anx7625
bridge, any device added is always treated as a panel
bridge, preventing connector_detect function from being
called. To resolve this, instead of just checking if it is a
panel bridge, verify the type of panel bridge
whether it is a DisplayPort or eDP panel. If the panel
bridge is not of the eDP type, add DRM_BRIDGE_OP_HPD and
DRM_BRIDGE_OP_DETECT to the bridge operations.
In the anx7625_sink_detect(), the device is checked to see
if it is a panel bridge, and it always sends a "connected"
status to the connector. When adding the DP port on port 1 of the
anx7625, it incorrectly treats it as a panel bridge and sends an
always "connected" status. Instead of checking the status on the
panel bridge, it's better to check the hpd_status for connectors
like DisplayPort. This way, it verifies the hpd_status variable
before sending the status to the connector.
Signed-off-by: Ayushi Makhija <quic_amakh...@quicinc.com>
---
drivers/gpu/drm/bridge/analogix/anx7625.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c
b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 764da1c1dc11..ad99ad19653f 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -1814,9 +1814,6 @@ static enum drm_connector_status
anx7625_sink_detect(struct anx7625_data *ctx)
DRM_DEV_DEBUG_DRIVER(dev, "sink detect\n");
- if (ctx->pdata.panel_bridge)
- return connector_status_connected;
-
return ctx->hpd_status ? connector_status_connected :
connector_status_disconnected;
}
@@ -2608,9 +2605,10 @@ static int anx7625_link_bridge(struct drm_dp_aux *aux)
platform->bridge.of_node = dev->of_node;
if (!anx7625_of_panel_on_aux_bus(dev))
platform->bridge.ops |= DRM_BRIDGE_OP_EDID;
- if (!platform->pdata.panel_bridge)
- platform->bridge.ops |= DRM_BRIDGE_OP_HPD |
- DRM_BRIDGE_OP_DETECT;
+ if (!platform->pdata.panel_bridge ||
+ platform->pdata.panel_bridge->type != DRM_MODE_CONNECTOR_eDP) {
+ platform->bridge.ops |= DRM_BRIDGE_OP_HPD |
DRM_BRIDGE_OP_DETECT;
+ }
platform->bridge.type = platform->pdata.panel_bridge ?
DRM_MODE_CONNECTOR_eDP :
DRM_MODE_CONNECTOR_DisplayPort;
--
2.34.1
