On Thu, Mar 06, 2025 at 07:11:16PM +0100, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dyb...@oss.qualcomm.com>
>
> The current compatible has been used with no corresponding
> documentation. Replace it with one that has been documented.
qcom,msm8916-kpss-acc is also not documented. Most likely you meant
qcom,kpss-acc-v2
>
> This has no functional effect, as these nodes' resources are only
> consumed through a phandle reference, anyway.
>
> Signed-off-by: Konrad Dybcio <konrad.dyb...@oss.qualcomm.com>
> ---
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index
> 8f35c9af18782aa1da7089988692e6588c4b7c5d..33a28f8163dda0e53f4176d61738ce175efc096c
> 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -2574,7 +2574,7 @@ frame@b028000 {
> };
>
> cpu0_acc: power-manager@b088000 {
> - compatible = "qcom,msm8916-acc";
> + compatible = "qcom,msm8916-kpss-acc";
> reg = <0x0b088000 0x1000>;
> status = "reserved"; /* Controlled by PSCI firmware */
> };
> @@ -2586,7 +2586,7 @@ cpu0_saw: power-manager@b089000 {
> };
>
> cpu1_acc: power-manager@b098000 {
> - compatible = "qcom,msm8916-acc";
> + compatible = "qcom,msm8916-kpss-acc";
> reg = <0x0b098000 0x1000>;
> status = "reserved"; /* Controlled by PSCI firmware */
> };
> @@ -2598,7 +2598,7 @@ cpu1_saw: power-manager@b099000 {
> };
>
> cpu2_acc: power-manager@b0a8000 {
> - compatible = "qcom,msm8916-acc";
> + compatible = "qcom,msm8916-kpss-acc";
> reg = <0x0b0a8000 0x1000>;
> status = "reserved"; /* Controlled by PSCI firmware */
> };
> @@ -2610,7 +2610,7 @@ cpu2_saw: power-manager@b0a9000 {
> };
>
> cpu3_acc: power-manager@b0b8000 {
> - compatible = "qcom,msm8916-acc";
> + compatible = "qcom,msm8916-kpss-acc";
> reg = <0x0b0b8000 0x1000>;
> status = "reserved"; /* Controlled by PSCI firmware */
> };
>
> --
> 2.48.1
>
--
With best wishes
Dmitry
