On Mon, Feb 03, 2025 at 06:29:21PM +0100, Krzysztof Kozlowski wrote:
> Add bitfields for PHY_CMN_CLK_CFG0 and PHY_CMN_CLK_CFG1 registers to
> avoid hard-coding bit masks and shifts and make the code a bit more
> readable. While touching the lines in dsi_7nm_pll_save_state()
> resulting cached->pix_clk_div assignment would be too big, so just
> combine pix_clk_div and bit_clk_div into one cached state to make
> everything simpler.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlow...@linaro.org>
>
> ---
>
> Changes in v2:
> 1. New patch
> ---
> drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 31
> ++++++++++++----------
> .../gpu/drm/msm/registers/display/dsi_phy_7nm.xml | 12 +++++++--
> 2 files changed, 27 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> index
> 926fd8e3330b2cdfc69d1e0e5d3930abae77b7d8..b61e75a01e1b69f33548ff0adefc5c92980a15d7
> 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> @@ -67,8 +67,7 @@ struct dsi_pll_config {
>
> struct pll_7nm_cached_state {
> unsigned long vco_rate;
> - u8 bit_clk_div;
> - u8 pix_clk_div;
> + u8 clk_div;
> u8 pll_out_div;
> u8 pll_mux;
> };
> @@ -401,12 +400,12 @@ static void dsi_pll_cmn_clk_cfg1_update(struct
> dsi_pll_7nm *pll, u32 mask,
>
> static void dsi_pll_disable_global_clk(struct dsi_pll_7nm *pll)
> {
> - dsi_pll_cmn_clk_cfg1_update(pll, BIT(5), 0);
> + dsi_pll_cmn_clk_cfg1_update(pll, DSI_7nm_PHY_CMN_CLK_CFG1_CLK_EN, 0);
> }
>
> static void dsi_pll_enable_global_clk(struct dsi_pll_7nm *pll)
> {
> - u32 cfg_1 = BIT(5) | BIT(4);
> + u32 cfg_1 = DSI_7nm_PHY_CMN_CLK_CFG1_CLK_EN |
> DSI_7nm_PHY_CMN_CLK_CFG1_CLK_EN_SEL;
>
> writel(0x04, pll->phy->base + REG_DSI_7nm_PHY_CMN_CTRL_3);
> dsi_pll_cmn_clk_cfg1_update(pll, cfg_1, cfg_1);
> @@ -572,15 +571,17 @@ static void dsi_7nm_pll_save_state(struct msm_dsi_phy
> *phy)
> cached->pll_out_div &= 0x3;
>
> cmn_clk_cfg0 = readl(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG0);
> - cached->bit_clk_div = cmn_clk_cfg0 & 0xf;
> - cached->pix_clk_div = (cmn_clk_cfg0 & 0xf0) >> 4;
> + cached->clk_div = cmn_clk_cfg0 &
> (DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_3_0__MASK |
> +
> DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_7_4__MASK);
Could you rather store these two fields separately by using FIELD_GET?
>
> cmn_clk_cfg1 = readl(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
> - cached->pll_mux = cmn_clk_cfg1 & 0x3;
> + cached->pll_mux = cmn_clk_cfg1 &
> DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL__MASK;
FIELD_GET
>
> DBG("DSI PLL%d outdiv %x bit_clk_div %x pix_clk_div %x pll_mux %x",
> - pll_7nm->phy->id, cached->pll_out_div, cached->bit_clk_div,
> - cached->pix_clk_div, cached->pll_mux);
> + pll_7nm->phy->id, cached->pll_out_div,
> + cached->clk_div & DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_3_0__MASK,
> + cached->clk_div >> DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_7_4__SHIFT,
> + cached->pll_mux);
> }
>
> static int dsi_7nm_pll_restore_state(struct msm_dsi_phy *phy)
> @@ -595,9 +596,9 @@ static int dsi_7nm_pll_restore_state(struct msm_dsi_phy
> *phy)
> val |= cached->pll_out_div;
> writel(val, pll_7nm->phy->pll_base +
> REG_DSI_7nm_PHY_PLL_PLL_OUTDIV_RATE);
>
> - dsi_pll_cmn_clk_cfg0_write(pll_7nm,
> - cached->bit_clk_div | (cached->pix_clk_div
> << 4));
> - dsi_pll_cmn_clk_cfg1_update(pll_7nm, 0x3, cached->pll_mux);
> + dsi_pll_cmn_clk_cfg0_write(pll_7nm, cached->clk_div);
> + dsi_pll_cmn_clk_cfg1_update(pll_7nm,
> DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL__MASK,
> + cached->pll_mux);
>
> ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw,
> pll_7nm->vco_current_rate,
> @@ -634,7 +635,8 @@ static int dsi_7nm_set_usecase(struct msm_dsi_phy *phy)
> }
>
> /* set PLL src */
> - dsi_pll_cmn_clk_cfg1_update(pll_7nm, GENMASK(3, 2), data << 2);
> + dsi_pll_cmn_clk_cfg1_update(pll_7nm,
> DSI_7nm_PHY_CMN_CLK_CFG1_BITCLK_SEL__MASK,
> + data <<
> DSI_7nm_PHY_CMN_CLK_CFG1_BITCLK_SEL__SHIFT);
use accessor function from the header.
>
> return 0;
> }
> @@ -737,7 +739,8 @@ static int pll_7nm_register(struct dsi_pll_7nm *pll_7nm,
> struct clk_hw **provide
> u32 data;
>
> data = readl(pll_7nm->phy->base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
> - writel(data | 3, pll_7nm->phy->base +
> REG_DSI_7nm_PHY_CMN_CLK_CFG1);
> + writel(data | DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL__MASK,
> + pll_7nm->phy->base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
>
> phy_pll_out_dsi_parent = pll_post_out_div;
> } else {
> diff --git a/drivers/gpu/drm/msm/registers/display/dsi_phy_7nm.xml
> b/drivers/gpu/drm/msm/registers/display/dsi_phy_7nm.xml
> index
> d54b72f924493b4bf0925c287366f7b1e18eb46b..d2c8c46bb04159da6e539bfe80a4b5dc9ffdf367
> 100644
> --- a/drivers/gpu/drm/msm/registers/display/dsi_phy_7nm.xml
> +++ b/drivers/gpu/drm/msm/registers/display/dsi_phy_7nm.xml
> @@ -9,8 +9,16 @@
> xsi:schemaLocation="https://gitlab.freedesktop.org/freedreno/ rules-fd.xsd">
> <reg32 offset="0x00004" name="REVISION_ID1"/>
> <reg32 offset="0x00008" name="REVISION_ID2"/>
> <reg32 offset="0x0000c" name="REVISION_ID3"/>
> - <reg32 offset="0x00010" name="CLK_CFG0"/>
> - <reg32 offset="0x00014" name="CLK_CFG1"/>
> + <reg32 offset="0x00010" name="CLK_CFG0">
> + <bitfield name="DIV_CTRL_3_0" low="0" high="3" type="uint"/>
> + <bitfield name="DIV_CTRL_7_4" low="4" high="7" type="uint"/>
Are there any sensible names for these two regs? It looks ther are
not...
> + </reg32>
> + <reg32 offset="0x00014" name="CLK_CFG1">
> + <bitfield name="CLK_EN" pos="5" type="boolean"/>
> + <bitfield name="CLK_EN_SEL" pos="4" type="boolean"/>
> + <bitfield name="BITCLK_SEL" low="2" high="3" type="uint"/>
> + <bitfield name="DSICLK_SEL" low="0" high="1" type="uint"/>
> + </reg32>
> <reg32 offset="0x00018" name="GLBL_CTRL"/>
> <reg32 offset="0x0001c" name="RBUF_CTRL"/>
> <reg32 offset="0x00020" name="VREG_CTRL_0"/>
>
> --
> 2.43.0
>
--
With best wishes
Dmitry
