Up until now we have only called the set_stall callback during
initialization when the device is off. But we will soon start calling it
to temporarily disable stall-on-fault when the device is on, so handle
that by checking if the device is on and writing SCTLR.
Signed-off-by: Connor Abbott <cwabbo...@gmail.com>
---
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 31 +++++++++++++++++++++++++++---
1 file changed, 28 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index
ee2fdf7e79a6d04bc2700e454253c96b573c5569..54be27f7b49d78b7542fd714d6aade2b23c65fc0
100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -112,12 +112,37 @@ static void qcom_adreno_smmu_set_stall(const void
*cookie, bool enabled)
{
struct arm_smmu_domain *smmu_domain = (void *)cookie;
struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
- struct qcom_smmu *qsmmu = to_qcom_smmu(smmu_domain->smmu);
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ struct qcom_smmu *qsmmu = to_qcom_smmu(smmu);
+ u32 mask = BIT(cfg->cbndx);
+ bool stall_changed = !!(qsmmu->stall_enabled & mask) != enabled;
if (enabled)
- qsmmu->stall_enabled |= BIT(cfg->cbndx);
+ qsmmu->stall_enabled |= mask;
else
- qsmmu->stall_enabled &= ~BIT(cfg->cbndx);
+ qsmmu->stall_enabled &= ~mask;
+
+ /*
+ * If the device is on and we changed the setting, update the register.
+ */
+ if (stall_changed && pm_runtime_get_if_active(smmu->dev) > 0) {
+ u32 reg = arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_SCTLR);
+
+ if (enabled)
+ reg |= ARM_SMMU_SCTLR_CFCFG;
+ else
+ reg &= ~ARM_SMMU_SCTLR_CFCFG;
+
+ arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_SCTLR, reg);
+
+ /*
+ * If doing this in the context fault handler, make sure the
+ * update lands before we acknowledge the fault.
+ */
+ wmb();
+
+ pm_runtime_put_autosuspend(smmu->dev);
+ }
}
static void qcom_adreno_smmu_resume_translation(const void *cookie, bool
terminate)
--
2.47.1
