Add support for HDMI PHY on Qualcomm MSM8974 / APQ8074 platforms.

Signed-off-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
---
 drivers/phy/qualcomm/Kconfig                |   2 +-
 drivers/phy/qualcomm/Makefile               |   1 +
 drivers/phy/qualcomm/phy-qcom-hdmi-28hpm.c  | 327 ++++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.c |   1 +
 drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.h |   1 +
 5 files changed, 331 insertions(+), 1 deletion(-)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-hdmi-28hpm.c

diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index f31b575a6832..36f78fd06b06 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -51,7 +51,7 @@ config PHY_QCOM_HDMI
        select GENERIC_PHY
        help
          Enable this to support the Qualcomm HDMI PHY presend on 32-bit 
platforms:
-         MSM8260, MSM8660, MSM8960, APQ8060 and APQ8064.
+         MSM8260, MSM8660, MSM8960, MSM8974, APQ8060, APQ8064, APQ8074 and 
APQ8084.
 
          Note, this driver is not used on MSM899x platforms, which use
          PHY_QCOM_QMP_HDMI instead.
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index de9bbaf45c74..082020af7fc1 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_PHY_QCOM_HDMI)             += phy-qcom-hdmi.o
 
 phy-qcom-hdmi-y := \
        phy-qcom-hdmi-preqmp.o \
+       phy-qcom-hdmi-28hpm.o \
        phy-qcom-hdmi-28lpm.o \
 
 obj-$(CONFIG_PHY_QCOM_M31_USB)         += phy-qcom-m31.o
diff --git a/drivers/phy/qualcomm/phy-qcom-hdmi-28hpm.c 
b/drivers/phy/qualcomm/phy-qcom-hdmi-28hpm.c
new file mode 100644
index 000000000000..d3bf67e743aa
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-hdmi-28hpm.c
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Red Hat
+ * Author: Rob Clark <robdcl...@gmail.com>
+ * Copyright (c) 2023, Linaro Ltd.
+ */
+
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+
+#include "phy-qcom-hdmi-preqmp.h"
+#include "phy-qcom-uniphy.h"
+
+#define REG_HDMI_8x74_ANA_CFG0                                 0x00000000
+#define REG_HDMI_8x74_ANA_CFG1                                 0x00000004
+#define REG_HDMI_8x74_ANA_CFG2                                 0x00000008
+#define REG_HDMI_8x74_ANA_CFG3                                 0x0000000c
+#define REG_HDMI_8x74_PD_CTRL0                                 0x00000010
+#define REG_HDMI_8x74_PD_CTRL1                                 0x00000014
+#define REG_HDMI_8x74_GLB_CFG                                  0x00000018
+#define REG_HDMI_8x74_DCC_CFG0                                 0x0000001c
+#define REG_HDMI_8x74_DCC_CFG1                                 0x00000020
+#define REG_HDMI_8x74_TXCAL_CFG0                               0x00000024
+#define REG_HDMI_8x74_TXCAL_CFG1                               0x00000028
+#define REG_HDMI_8x74_TXCAL_CFG2                               0x0000002c
+#define REG_HDMI_8x74_TXCAL_CFG3                               0x00000030
+#define REG_HDMI_8x74_BIST_CFG0                                        
0x00000034
+#define REG_HDMI_8x74_BIST_PATN0                               0x0000003c
+#define REG_HDMI_8x74_BIST_PATN1                               0x00000040
+#define REG_HDMI_8x74_BIST_PATN2                               0x00000044
+#define REG_HDMI_8x74_BIST_PATN3                               0x00000048
+#define REG_HDMI_8x74_STATUS                                   0x0000005c
+
+#define HDMI_8974_VCO_MAX_FREQ 1800000000UL
+#define HDMI_8974_VCO_MIN_FREQ  600000000UL
+
+#define HDMI_8974_COMMON_DIV 5
+
+static void qcom_uniphy_setup(void __iomem *base, unsigned int ref_freq,
+                             bool sdm_mode,
+                             bool ref_freq_mult_2,
+                             bool dither,
+                             unsigned int refclk_div,
+                             unsigned int vco_freq)
+{
+       unsigned int int_ref_freq = ref_freq * (ref_freq_mult_2 ? 2 : 1);
+       unsigned int div_in_freq = vco_freq / refclk_div;
+       unsigned int dc_offset = div_in_freq / int_ref_freq - 1;
+       unsigned int sdm_freq_seed;
+       unsigned int val;
+       unsigned int remain = div_in_freq - (dc_offset + 1) * int_ref_freq;
+       sdm_freq_seed = mult_frac(remain, 0x10000, int_ref_freq);
+
+       val = (ref_freq_mult_2 ? BIT(0) : 0) |
+               ((refclk_div - 1) << 2);
+       writel(val, base + UNIPHY_PLL_REFCLK_CFG);
+
+       writel(sdm_mode ? 0 : 0x40 + dc_offset, base + UNIPHY_PLL_SDM_CFG0);
+
+       writel(dither ? 0x40 + dc_offset: 0, base + UNIPHY_PLL_SDM_CFG1);
+
+       writel(sdm_freq_seed & 0xff, base + UNIPHY_PLL_SDM_CFG2);
+
+       writel((sdm_freq_seed >> 8) & 0xff, base + UNIPHY_PLL_SDM_CFG3);
+
+       writel(sdm_freq_seed >> 16, base + UNIPHY_PLL_SDM_CFG4);
+
+       ref_freq = ref_freq * 5 / 1000;
+       writel(ref_freq & 0xff, base + UNIPHY_PLL_CAL_CFG8);
+
+       writel(ref_freq >> 8, base + UNIPHY_PLL_CAL_CFG9);
+
+       vco_freq /= 1000;
+       writel(vco_freq & 0xff, base + UNIPHY_PLL_CAL_CFG10);
+
+       writel(vco_freq >> 8, base + UNIPHY_PLL_CAL_CFG11);
+}
+
+static unsigned long qcom_uniphy_recalc(void __iomem *base, unsigned long 
parent_rate)
+{
+       unsigned long rate;
+       u32 refclk_cfg;
+       u32 dc_offset;
+       u64 fraq_n;
+       u32 val;
+
+       refclk_cfg = readl(base + UNIPHY_PLL_REFCLK_CFG);
+       if (refclk_cfg & BIT(0))
+               parent_rate *= 2;
+
+       val = readl(base + UNIPHY_PLL_SDM_CFG0);
+       if (val & 0x40) {
+               dc_offset = val & 0x3f;
+               fraq_n = 0;
+       } else {
+               dc_offset = readl(base + UNIPHY_PLL_SDM_CFG1) & 0x3f;
+               fraq_n = readl(base + UNIPHY_PLL_SDM_CFG2) |
+                       (readl(base + UNIPHY_PLL_SDM_CFG3) << 8);
+       }
+
+       rate = (dc_offset + 1) * parent_rate;
+       rate += mult_frac(fraq_n, parent_rate, 0x10000);
+
+       rate *= (refclk_cfg >> 2) * 0x3 + 1;
+
+       return rate;
+}
+
+static const unsigned int qcom_hdmi_8974_divs[] = {1, 2, 4, 6};
+
+static unsigned long qcom_hdmi_8974_pll_recalc_rate(struct clk_hw *hw,
+                                                   unsigned long parent_rate)
+{
+       struct qcom_hdmi_preqmp_phy *hdmi_phy = hw_clk_to_phy(hw);
+       u32 div_idx = hdmi_pll_read(hdmi_phy, UNIPHY_PLL_POSTDIV1_CFG);
+       unsigned long rate = qcom_uniphy_recalc(hdmi_phy->pll_reg, parent_rate);
+
+       return  rate / HDMI_8974_COMMON_DIV / qcom_hdmi_8974_divs[div_idx & 
0x3];
+}
+
+static long qcom_hdmi_8974_pll_round_rate(struct clk_hw *hw, unsigned long 
rate,
+                                         unsigned long *parent_rate)
+{
+       return clamp(rate,
+                    HDMI_8974_VCO_MIN_FREQ / HDMI_8974_COMMON_DIV / 6,
+                    HDMI_8974_VCO_MAX_FREQ / HDMI_8974_COMMON_DIV / 1);
+}
+
+static const struct clk_ops qcom_hdmi_8974_pll_ops = {
+       .recalc_rate = qcom_hdmi_8974_pll_recalc_rate,
+       .round_rate = qcom_hdmi_8974_pll_round_rate,
+};
+
+static int qcom_hdmi_msm8974_phy_find_div(unsigned int pixclk)
+{
+       int i;
+       unsigned int min_freq = HDMI_8974_VCO_MIN_FREQ / HDMI_8974_COMMON_DIV / 
1000;
+
+       if (pixclk > HDMI_8974_VCO_MAX_FREQ / HDMI_8974_COMMON_DIV / 1000)
+               return -E2BIG;
+
+       for (i = 0; i < ARRAY_SIZE(qcom_hdmi_8974_divs); i++) {
+               if (pixclk >= min_freq / qcom_hdmi_8974_divs[i])
+                       return i;
+       }
+
+       return -EINVAL;
+}
+
+static int qcom_hdmi_msm8974_phy_pll_set_rate(struct qcom_hdmi_preqmp_phy 
*hdmi_phy)
+{
+       unsigned int pixclk = hdmi_phy->hdmi_opts.pixel_clk_rate;
+       unsigned long vco_rate;
+       unsigned int div;
+       int div_idx = 0;
+
+       div_idx = qcom_hdmi_msm8974_phy_find_div(pixclk);
+       if (WARN_ON(div_idx < 0))
+               return div_idx;
+
+       div = qcom_hdmi_8974_divs[div_idx];
+       vco_rate = pixclk * HDMI_8974_COMMON_DIV * div;
+
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_GLB_CFG, 0x81);
+
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_GLB_CFG, 0x01);
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_VCOLPF_CFG, 0x19);
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_LPFR_CFG, 0x0e);
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_LPFC1_CFG, 0x20);
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_LPFC2_CFG, 0x0d);
+
+       qcom_uniphy_setup(hdmi_phy->pll_reg, 19200, true, true, true, 1, 
vco_rate);
+
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_LKDET_CFG0, 0x10);
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_LKDET_CFG1, 0x1a);
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_LKDET_CFG2, 0x05);
+
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_POSTDIV1_CFG, div_idx);
+
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_POSTDIV2_CFG, 0x00);
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_POSTDIV3_CFG, 0x00);
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_CAL_CFG2, 0x01);
+
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_PD_CTRL0, 0x1f);
+       udelay(50);
+
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_GLB_CFG, 0x0f);
+
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_PD_CTRL1, 0x00);
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG2, 0x10);
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG0, 0xdb);
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG1, 0x43);
+       if (pixclk == 297000) {
+               hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG2, 0x06);
+               hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG3, 0x03);
+       } else if (pixclk == 268500) {
+               hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG2, 0x05);
+               hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG3, 0x00);
+       } else {
+               hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG2, 0x02);
+               hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG3, 0x00);
+       }
+
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_VREG_CFG, 0x04);
+
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_DCC_CFG0, 0xd0);
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_DCC_CFG1, 0x1a);
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_TXCAL_CFG0, 0x00);
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_TXCAL_CFG1, 0x00);
+       if (pixclk == 268500) {
+               hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_TXCAL_CFG2, 0x11);
+       } else {
+               hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_TXCAL_CFG2, 0x02);
+       }
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_TXCAL_CFG3, 0x05);
+       udelay(200);
+
+       return 0;
+}
+
+static int qcom_hdmi_msm8974_phy_pll_enable(struct qcom_hdmi_preqmp_phy 
*hdmi_phy)
+{
+       int ret;
+       unsigned long status;
+
+       /* Global enable */
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_GLB_CFG, 0x81);
+
+       /* Power up power gen */
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_PD_CTRL0, 0x00);
+       udelay(350);
+
+       /* PLL power up */
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_GLB_CFG, 0x01);
+       udelay(5);
+
+       /* Power up PLL LDO */
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_GLB_CFG, 0x03);
+       udelay(350);
+
+       /* PLL power up */
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_GLB_CFG, 0x0f);
+       udelay(350);
+
+       /* Poll for PLL ready status */
+       ret = readl_poll_timeout(hdmi_phy->pll_reg + UNIPHY_PLL_STATUS,
+                                status, status & BIT(0),
+                                100, 2000);
+       if (ret) {
+               dev_warn(hdmi_phy->dev, "HDMI PLL not ready\n");
+               goto err;
+       }
+
+       udelay(350);
+
+       /* Poll for PHY ready status */
+       ret = readl_poll_timeout(hdmi_phy->phy_reg + REG_HDMI_8x74_STATUS,
+                                status, status & BIT(0),
+                                100, 2000);
+       if (ret) {
+               dev_warn(hdmi_phy->dev, "HDMI PHY not ready\n");
+               goto err;
+       }
+
+       return 0;
+
+err:
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_GLB_CFG, 0);
+       udelay(5);
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_GLB_CFG, 0);
+
+       return ret;
+}
+
+static int qcom_hdmi_msm8974_phy_power_on(struct qcom_hdmi_preqmp_phy 
*hdmi_phy)
+{
+       int ret;
+
+       ret = qcom_hdmi_msm8974_phy_pll_set_rate(hdmi_phy);
+       if (ret)
+               return ret;
+
+       ret = qcom_hdmi_msm8974_phy_pll_enable(hdmi_phy);
+       if (ret)
+               return ret;
+
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG0,   0x1b);
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_ANA_CFG1,   0xf2);
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_BIST_CFG0,  0x0);
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_BIST_PATN0, 0x0);
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_BIST_PATN1, 0x0);
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_BIST_PATN2, 0x0);
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_BIST_PATN3, 0x0);
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_PD_CTRL1,   0x20);
+
+       return 0;
+}
+
+static int qcom_hdmi_msm8974_phy_power_off(struct qcom_hdmi_preqmp_phy 
*hdmi_phy)
+{
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_PD_CTRL0, 0x7f);
+
+       hdmi_pll_write(hdmi_phy, UNIPHY_PLL_GLB_CFG, 0);
+       udelay(5);
+       hdmi_phy_write(hdmi_phy, REG_HDMI_8x74_GLB_CFG, 0);
+
+       return 0;
+}
+
+const struct clk_parent_data msm8974_hdmi_pll_parent = {
+       .fw_name = "xo", .name = "xo_board",
+};
+
+const struct qcom_hdmi_preqmp_cfg msm8974_hdmi_phy_cfg = {
+       .clk_names = { "iface", "alt_iface" },
+       .num_clks = 2,
+
+       .reg_names = { "vddio", "core-vdda" },
+       .reg_init_load = { 100000, 10000 },
+       .num_regs = 2,
+
+       .power_on = qcom_hdmi_msm8974_phy_power_on,
+       .power_off = qcom_hdmi_msm8974_phy_power_off,
+
+       .pll_ops = &qcom_hdmi_8974_pll_ops,
+       .pll_parent = &msm8974_hdmi_pll_parent,
+};
diff --git a/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.c 
b/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.c
index 6885f587d7b4..e181a45df2dc 100644
--- a/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.c
@@ -181,6 +181,7 @@ static int qcom_hdmi_preqmp_probe(struct platform_device 
*pdev)
 
 static const struct of_device_id qcom_hdmi_preqmp_of_match_table[] = {
        { .compatible = "qcom,hdmi-phy-8960", .data = &msm8960_hdmi_phy_cfg, },
+       { .compatible = "qcom,hdmi-phy-8974", .data = &msm8974_hdmi_phy_cfg, },
        { },
 };
 MODULE_DEVICE_TABLE(of, qcom_hdmi_preqmp_of_match_table);
diff --git a/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.h 
b/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.h
index dca9be78d8fc..bc81d68463ec 100644
--- a/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.h
@@ -75,5 +75,6 @@ static inline u32 hdmi_pll_read(struct qcom_hdmi_preqmp_phy 
*phy, int offset)
 }
 
 extern const struct qcom_hdmi_preqmp_cfg msm8960_hdmi_phy_cfg;
+extern const struct qcom_hdmi_preqmp_cfg msm8974_hdmi_phy_cfg;
 
 #endif
-- 
2.39.2

Reply via email to