Hi Abhinav,
Thank you for the patch.
On Wed, Mar 16, 2022 at 11:48:16AM -0700, Abhinav Kumar wrote:
> For some vendor driver implementations, display hardware can
> be shared between the encoder used for writeback and the physical
> display.
>
> In addition resources such as clocks and interrupts can
> also be shared between writeback and the real encoder.
>
> To accommodate such vendor drivers and hardware, allow
> real encoder to be passed for drm_writeback_connector using a new
> drm_writeback_connector_init_with_encoder() API.
The commit message doesn't match the commit.
> In addition, to preserve the same call flows for the existing
> users of drm_writeback_connector_init(), also allow passing
> possible_crtcs as a parameter so that encoder can be initialized
> with it.
>
> changes in v3:
> - allow passing possible_crtcs for existing users of
> drm_writeback_connector_init()
> - squash the vendor changes into the same commit so
> that each patch in the series can compile individually
>
> Co-developed-by: Kandpal Suraj <suraj.kand...@intel.com>
> Signed-off-by: Abhinav Kumar <quic_abhin...@quicinc.com>
> ---
> .../drm/arm/display/komeda/komeda_wb_connector.c | 3 +-
> drivers/gpu/drm/arm/malidp_mw.c | 5 +-
> drivers/gpu/drm/drm_writeback.c | 103
> +++++++++++++--------
> drivers/gpu/drm/rcar-du/rcar_du_writeback.c | 5 +-
> drivers/gpu/drm/vc4/vc4_txp.c | 19 ++--
> drivers/gpu/drm/vkms/vkms_writeback.c | 3 +-
> include/drm/drm_writeback.h | 22 ++++-
> 7 files changed, 103 insertions(+), 57 deletions(-)
>
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> index e465cc4..40774e6 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> @@ -155,7 +155,6 @@ static int komeda_wb_connector_add(struct komeda_kms_dev
> *kms,
> kwb_conn->wb_layer = kcrtc->master->wb_layer;
>
> wb_conn = &kwb_conn->base;
> - wb_conn->encoder.possible_crtcs = BIT(drm_crtc_index(&kcrtc->base));
>
> formats = komeda_get_layer_fourcc_list(&mdev->fmt_tbl,
> kwb_conn->wb_layer->layer_type,
> @@ -164,7 +163,7 @@ static int komeda_wb_connector_add(struct komeda_kms_dev
> *kms,
> err = drm_writeback_connector_init(&kms->base, wb_conn,
> &komeda_wb_connector_funcs,
> &komeda_wb_encoder_helper_funcs,
> - formats, n_formats);
> + formats, n_formats,
> BIT(drm_crtc_index(&kcrtc->base)));
> komeda_put_fourcc_list(formats);
> if (err) {
> kfree(kwb_conn);
> diff --git a/drivers/gpu/drm/arm/malidp_mw.c b/drivers/gpu/drm/arm/malidp_mw.c
> index f5847a7..b882066 100644
> --- a/drivers/gpu/drm/arm/malidp_mw.c
> +++ b/drivers/gpu/drm/arm/malidp_mw.c
> @@ -208,11 +208,12 @@ int malidp_mw_connector_init(struct drm_device *drm)
> struct malidp_drm *malidp = drm->dev_private;
> u32 *formats;
> int ret, n_formats;
> + uint32_t possible_crtcs;
>
> if (!malidp->dev->hw->enable_memwrite)
> return 0;
>
> - malidp->mw_connector.encoder.possible_crtcs = 1 <<
> drm_crtc_index(&malidp->crtc);
> + possible_crtcs = 1 << drm_crtc_index(&malidp->crtc);
> drm_connector_helper_add(&malidp->mw_connector.base,
> &malidp_mw_connector_helper_funcs);
>
> @@ -223,7 +224,7 @@ int malidp_mw_connector_init(struct drm_device *drm)
> ret = drm_writeback_connector_init(drm, &malidp->mw_connector,
> &malidp_mw_connector_funcs,
> &malidp_mw_encoder_helper_funcs,
> - formats, n_formats);
> + formats, n_formats, possible_crtcs);
Do you need the local variable ?
> kfree(formats);
> if (ret)
> return ret;
> diff --git a/drivers/gpu/drm/drm_writeback.c b/drivers/gpu/drm/drm_writeback.c
> index dccf4504..17c1471 100644
> --- a/drivers/gpu/drm/drm_writeback.c
> +++ b/drivers/gpu/drm/drm_writeback.c
> @@ -149,36 +149,15 @@ static const struct drm_encoder_funcs
> drm_writeback_encoder_funcs = {
> .destroy = drm_encoder_cleanup,
> };
>
> -/**
> - * drm_writeback_connector_init - Initialize a writeback connector and its
> properties
> - * @dev: DRM device
> - * @wb_connector: Writeback connector to initialize
> - * @con_funcs: Connector funcs vtable
> - * @enc_helper_funcs: Encoder helper funcs vtable to be used by the internal
> encoder
> - * @formats: Array of supported pixel formats for the writeback engine
> - * @n_formats: Length of the formats array
> - *
> - * This function creates the writeback-connector-specific properties if they
> - * have not been already created, initializes the connector as
> - * type DRM_MODE_CONNECTOR_WRITEBACK, and correctly initializes the property
> - * values. It will also create an internal encoder associated with the
> - * drm_writeback_connector and set it to use the @enc_helper_funcs vtable for
> - * the encoder helper.
> - *
> - * Drivers should always use this function instead of drm_connector_init() to
> - * set up writeback connectors.
> - *
> - * Returns: 0 on success, or a negative error code
> - */
> -int drm_writeback_connector_init(struct drm_device *dev,
> - struct drm_writeback_connector *wb_connector,
> - const struct drm_connector_funcs *con_funcs,
> - const struct drm_encoder_helper_funcs
> *enc_helper_funcs,
> - const u32 *formats, int n_formats)
> +static int drm_writeback_connector_setup(struct drm_device *dev,
> + struct drm_writeback_connector *wb_connector,
> + const struct drm_connector_funcs *con_funcs, const u32 *formats,
> + int n_formats)
> {
> struct drm_property_blob *blob;
> - struct drm_connector *connector = &wb_connector->base;
> struct drm_mode_config *config = &dev->mode_config;
> + struct drm_connector *connector = &wb_connector->base;
> +
> int ret = create_writeback_properties(dev);
>
> if (ret != 0)
> @@ -186,15 +165,10 @@ int drm_writeback_connector_init(struct drm_device *dev,
>
> blob = drm_property_create_blob(dev, n_formats * sizeof(*formats),
> formats);
> - if (IS_ERR(blob))
> - return PTR_ERR(blob);
> -
> - drm_encoder_helper_add(&wb_connector->encoder, enc_helper_funcs);
> - ret = drm_encoder_init(dev, &wb_connector->encoder,
> - &drm_writeback_encoder_funcs,
> - DRM_MODE_ENCODER_VIRTUAL, NULL);
> - if (ret)
> - goto fail;
> + if (IS_ERR(blob)) {
> + ret = PTR_ERR(blob);
> + return ret;
> + }
>
> connector->interlace_allowed = 0;
>
> @@ -204,7 +178,7 @@ int drm_writeback_connector_init(struct drm_device *dev,
> goto connector_fail;
>
> ret = drm_connector_attach_encoder(connector,
> - &wb_connector->encoder);
> + wb_connector->encoder);
> if (ret)
> goto attach_fail;
>
> @@ -233,11 +207,62 @@ int drm_writeback_connector_init(struct drm_device *dev,
> attach_fail:
> drm_connector_cleanup(connector);
> connector_fail:
> - drm_encoder_cleanup(&wb_connector->encoder);
> -fail:
> drm_property_blob_put(blob);
> return ret;
> }
> +
> +/**
> + * drm_writeback_connector_init - Initialize a writeback connector and its
> properties
> + * using an internal encoder
> + *
> + * @dev: DRM device
> + * @wb_connector: Writeback connector to initialize
> + * @con_funcs: Connector funcs vtable
> + * @enc_helper_funcs: Encoder helper funcs vtable to be used by the internal
> encoder
> + * @formats: Array of supported pixel formats for the writeback engine
> + * @n_formats: Length of the formats array
> + * @possible_crtcs: possible crtcs for the internal writeback encoder
> + *
> + * This function creates the writeback-connector-specific properties if they
> + * have not been already created, initializes the connector as
> + * type DRM_MODE_CONNECTOR_WRITEBACK, and correctly initializes the property
> + * values. It will also create an internal encoder associated with the
> + * drm_writeback_connector and set it to use the @enc_helper_funcs vtable for
> + * the encoder helper.
> + *
> + * Drivers should always use this function instead of drm_connector_init() to
> + * set up writeback connectors.
> + *
> + * Returns: 0 on success, or a negative error code
> + */
> +int drm_writeback_connector_init(struct drm_device *dev,
> + struct drm_writeback_connector *wb_connector,
> + const struct drm_connector_funcs *con_funcs,
> + const struct drm_encoder_helper_funcs *enc_helper_funcs,
> + const u32 *formats, int n_formats, uint32_t possible_crtcs)
> +{
> + int ret = 0;
> +
> + wb_connector->encoder = &wb_connector->internal_encoder;
> +
> + drm_encoder_helper_add(wb_connector->encoder, enc_helper_funcs);
> +
> + wb_connector->encoder->possible_crtcs = possible_crtcs;
> +
> + ret = drm_encoder_init(dev, wb_connector->encoder,
> + &drm_writeback_encoder_funcs,
> + DRM_MODE_ENCODER_VIRTUAL, NULL);
> + if (ret)
> + return ret;
> +
> + ret = drm_writeback_connector_setup(dev, wb_connector, con_funcs,
> formats,
> + n_formats);
> +
> + if (ret)
> + drm_encoder_cleanup(wb_connector->encoder);
> +
> + return ret;
> +}
All this doesn't belong to this patch. Just add the possible_crtcs
argument to drm_writeback_connector_init() in 1/3, nothing else. One
functional change, one patch.
> EXPORT_SYMBOL(drm_writeback_connector_init);
>
> int drm_writeback_set_fb(struct drm_connector_state *conn_state,
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_writeback.c
> b/drivers/gpu/drm/rcar-du/rcar_du_writeback.c
> index c79d125..1a610c0 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_writeback.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_writeback.c
> @@ -199,8 +199,9 @@ int rcar_du_writeback_init(struct rcar_du_device *rcdu,
> struct rcar_du_crtc *rcrtc)
> {
> struct drm_writeback_connector *wb_conn = &rcrtc->writeback;
> + uint32_t possible_crtcs;
>
> - wb_conn->encoder.possible_crtcs = 1 << drm_crtc_index(&rcrtc->crtc);
> + possible_crtcs = 1 << drm_crtc_index(&rcrtc->crtc);
> drm_connector_helper_add(&wb_conn->base,
> &rcar_du_wb_conn_helper_funcs);
>
> @@ -208,7 +209,7 @@ int rcar_du_writeback_init(struct rcar_du_device *rcdu,
> &rcar_du_wb_conn_funcs,
> &rcar_du_wb_enc_helper_funcs,
> writeback_formats,
> - ARRAY_SIZE(writeback_formats));
> + ARRAY_SIZE(writeback_formats),
> possible_crtcs);
Same here, do you need the intermediate variable ?
And please add a line break after ARRAY_SIZE().
> }
>
> void rcar_du_writeback_setup(struct rcar_du_crtc *rcrtc,
> diff --git a/drivers/gpu/drm/vc4/vc4_txp.c b/drivers/gpu/drm/vc4/vc4_txp.c
> index 9809ca3..32c4fb0 100644
> --- a/drivers/gpu/drm/vc4/vc4_txp.c
> +++ b/drivers/gpu/drm/vc4/vc4_txp.c
> @@ -151,6 +151,8 @@ struct vc4_txp {
>
> struct platform_device *pdev;
>
> + struct drm_encoder drm_enc;
> +
> struct drm_writeback_connector connector;
>
> void __iomem *regs;
> @@ -159,7 +161,7 @@ struct vc4_txp {
>
> static inline struct vc4_txp *encoder_to_vc4_txp(struct drm_encoder *encoder)
> {
> - return container_of(encoder, struct vc4_txp, connector.encoder);
> + return container_of(encoder, struct vc4_txp, drm_enc);
> }
>
> static inline struct vc4_txp *connector_to_vc4_txp(struct drm_connector
> *conn)
> @@ -467,6 +469,7 @@ static int vc4_txp_bind(struct device *dev, struct device
> *master, void *data)
> struct vc4_txp *txp;
> struct drm_crtc *crtc;
> struct drm_encoder *encoder;
> + struct drm_writeback_connector *wb_conn;
> int ret, irq;
>
> irq = platform_get_irq(pdev, 0);
> @@ -492,12 +495,14 @@ static int vc4_txp_bind(struct device *dev, struct
> device *master, void *data)
> txp->regset.regs = txp_regs;
> txp->regset.nregs = ARRAY_SIZE(txp_regs);
>
> - drm_connector_helper_add(&txp->connector.base,
> + wb_conn = &txp->connector;
> + wb_conn->encoder = &txp->drm_enc;
> +
> + drm_connector_helper_add(&wb_conn->base,
> &vc4_txp_connector_helper_funcs);
> - ret = drm_writeback_connector_init(drm, &txp->connector,
> - &vc4_txp_connector_funcs,
> - &vc4_txp_encoder_helper_funcs,
> - drm_fmts, ARRAY_SIZE(drm_fmts));
> + ret = drm_writeback_connector_init(drm, wb_conn,
> + &vc4_txp_connector_funcs, &vc4_txp_encoder_helper_funcs,
> + drm_fmts, ARRAY_SIZE(drm_fmts), 0);
Most of this also doesn't belong to this patch.
> if (ret)
> return ret;
>
> @@ -506,7 +511,7 @@ static int vc4_txp_bind(struct device *dev, struct device
> *master, void *data)
> if (ret)
> return ret;
>
> - encoder = &txp->connector.encoder;
> + encoder = txp->connector.encoder;
> encoder->possible_crtcs = drm_crtc_mask(crtc);
>
> ret = devm_request_irq(dev, irq, vc4_txp_interrupt, 0,
> diff --git a/drivers/gpu/drm/vkms/vkms_writeback.c
> b/drivers/gpu/drm/vkms/vkms_writeback.c
> index 8694227..381e7b7 100644
> --- a/drivers/gpu/drm/vkms/vkms_writeback.c
> +++ b/drivers/gpu/drm/vkms/vkms_writeback.c
> @@ -140,12 +140,11 @@ int vkms_enable_writeback_connector(struct vkms_device
> *vkmsdev)
> {
> struct drm_writeback_connector *wb = &vkmsdev->output.wb_connector;
>
> - vkmsdev->output.wb_connector.encoder.possible_crtcs = 1;
> drm_connector_helper_add(&wb->base, &vkms_wb_conn_helper_funcs);
>
> return drm_writeback_connector_init(&vkmsdev->drm, wb,
> &vkms_wb_connector_funcs,
> &vkms_wb_encoder_helper_funcs,
> vkms_wb_formats,
> - ARRAY_SIZE(vkms_wb_formats));
> + ARRAY_SIZE(vkms_wb_formats), 1);
> }
> diff --git a/include/drm/drm_writeback.h b/include/drm/drm_writeback.h
> index 9697d27..5e002bc 100644
> --- a/include/drm/drm_writeback.h
> +++ b/include/drm/drm_writeback.h
> @@ -25,13 +25,29 @@ struct drm_writeback_connector {
> struct drm_connector base;
>
> /**
> - * @encoder: Internal encoder used by the connector to fulfill
> + * @encoder: handle to drm_encoder used by the connector to fulfill
> * the DRM framework requirements. The users of the
> * @drm_writeback_connector control the behaviour of the @encoder
> * by passing the @enc_funcs parameter to drm_writeback_connector_init()
> * function.
> + *
> + * For some vendor drivers, the hardware resources are shared between
> + * writeback encoder and rest of the display pipeline.
> + * To accommodate such cases, encoder is a handle to the real encoder
> + * hardware.
> + *
> + * For current existing writeback users, this shall continue to be the
> + * embedded encoder for the writeback connector.
> + *
> + */
> + struct drm_encoder *encoder;
> +
> + /**
> + * @internal_encoder: internal encoder used by writeback when
> + * a real encoder is not provided by the vendor drm drivers.
> + * @encoder will be assigned to this for those cases.
> */
> - struct drm_encoder encoder;
> + struct drm_encoder internal_encoder;
None of this belong here.
>
> /**
> * @pixel_formats_blob_ptr:
> @@ -150,7 +166,7 @@ int drm_writeback_connector_init(struct drm_device *dev,
> struct drm_writeback_connector *wb_connector,
> const struct drm_connector_funcs *con_funcs,
> const struct drm_encoder_helper_funcs
> *enc_helper_funcs,
> - const u32 *formats, int n_formats);
> + const u32 *formats, int n_formats, uint32_t
> possible_crtcs);
>
> int drm_writeback_set_fb(struct drm_connector_state *conn_state,
> struct drm_framebuffer *fb);
--
Regards,
Laurent Pinchart
