Move the bus clock to mdp device node,in order to facilitate bus band
width scaling on sdm845 target.
The parent device MDSS will not vote for bus bw, instead the vote will
be triggered by mdp device node. Since a minimum vote is required to
turn on bus clock, move the clock node to mdp device from where the
votes are requested.
Signed-off-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi
b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 1796ae8372be..9e77a323b1cd 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4148,9 +4148,8 @@ mdss: mdss@ae00000 {
power-domains = <&dispcc MDSS_GDSC>;
clocks = <&gcc GCC_DISP_AHB_CLK>,
- <&gcc GCC_DISP_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
- clock-names = "iface", "bus", "core";
+ clock-names = "iface", "core";
assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
assigned-clock-rates = <300000000>;
@@ -4178,11 +4177,12 @@ mdss_mdp: mdp@ae01000 {
<0 0x0aeb0000 0 0x2008>;
reg-names = "mdp", "vbif";
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ clocks = <&gcc GCC_DISP_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
- clock-names = "iface", "bus", "core", "vsync";
+ clock-names = "gcc-bus", "iface", "bus",
"core", "vsync";
assigned-clocks = <&dispcc
DISP_CC_MDSS_MDP_CLK>,
<&dispcc
DISP_CC_MDSS_VSYNC_CLK>;
--
2.30.2
