Hi!
> Is a Lacie CloudBox with RJ45, my box is 3TB and a 2TB (no HDD) The handbook on lacie.com says: http://manuals.lacie.com/en/manuals/cb/06_advanced_access/advanced-access02-ftp You can use http, ftp, sftp, streaming... default seems to be smb or similar windows network drive. Windows xp, macos 10.5 and Linux 2.6 are minimum requirements. It does not seem to support any type of network boot service with the default firmware, nor boot of the box itself from external network servers. > What i meant to say was, the CloudBox OS can't boot the HDD, there- > fore there is no ip address for windows/linux to connect to. In other words, your NAS box is broken because the built-in operating system of the cloudbox broke? The handbook says you can do this to re-install itself from an internal backup, similar to other recoveries: http://manuals.lacie.com/en/manuals/cb/07_device/reset Takes 10 minutes - do not disturb the box in that time. If the blue led is off, there might be a power supply issue, also if it flickers for a long time. if there is loud and frequent clicking, the harddisks inside may have a hardware problem. Regards, Eric _______________________________________________ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
