Once again my overflow of gratitude:
while (1) {
Mateusz++;
}
Alain, maybe we could update LIDOS with Mateusz picoTCP
Kind Regards,
Geraldo Netto
Sapere Aude => Non dvcor, dvco
http://exdev.sf.net/
On 19 November 2015 at 17:00, Mateusz Viste <mate...@viste.fr> wrote:
> Hello group,
>
> I write this message to share a little news about what I was doing in my
> spare time these last two months: porting picoTCP to DOS.
>
> picoTCP is a modern, dual-stack, open-source TCP/IP stack. It has been
> created by the good people at Intelligent Systems (Altran), primarily as
> a stack designed for embedded computing (hence hardware with very
> limited horse power). It is backed by a well established corporation and
> it's actively maintained.
>
> I played with the stack for some times now, and ended up building an
> entire DOS compatibility layer around it. A few patches were required to
> the stack, a few days of development, many hours of debugging - but here
> it is - the first public release of picoTCP for DOS!
>
> http://picotcp4dos.sourceforge.net
>
> The project contains three major parts:
>
> - ipcfg: a little tool that allows to configure networking on your DOS
> machine (IP, DNS, etc). No, it's not a text file - I wanted to avoid the
> complexity of parsing a text file, and opted for a binary configuration
> file that is manipulated via ipcfg. It's much more flexible that a text
> config file, while being much easier/faster to load at runtime.
>
> - ping: no need to explain, I guess... my ping tool for DOS, based on
> picoTCP - crucial when it comes to testing your networking
>
> - an OpenWatcom library package (openwatcom, large memory model) - this
> is for the fellow developers that would like to use the DOS version of
> picoTCP inside their network-enabled, 16-bit DOS programs. I integrated
> a packet driver schim, a DOS-compatible timer, as well as the whole IP
> configuration logic, so it is now a simple (2 functions!) public API
> that allows to load picoTCP, use it, and unload it.
>
>
> *** Short how-to ***
>
> 1. Download picotcp4dos and unzip it on your drive
> 2. Set the location where the config file will be stored, for example:
> SET PICOTCP=C:\PICOTCP.DAT
> 3. Bind picoTCP to the interrupt vector of your packet driver, example:
> ipcfg int 60
> 4. Configure your IP settings using ipcfg, or use DHCP (ipcfg dhcp)
>
> enjoy!
>
> Mateusz
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Freedos-user mailing list
> Freedos-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/freedos-user
------------------------------------------------------------------------------
_______________________________________________
Freedos-user mailing list
Freedos-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freedos-user
