Ho excuse me i use a external batch for load msclient.. finally i use
www.netbootdisk.com
Who use Msclient 3.0
I will post this thread in freedos-devel
Thank :)
From: uhan...@mainz-online.de
Date: Sun, 11 May 2014 15:51:23 +0200
To: freedos-user@lists.sourceforge.net
Subject: Re: [Freedos-user] Network problem with freebasic and freedos
Hi Sébastien,
my FreeDOS is a bit rusty ;-) so these are just shots in the dark. Maybe
someone has more experience?
Yes i not have problem when i work with FreeDos and when i use my program for
... edit content file OR just copy there is a problem
All is correct ! i not have this problem when i use Dr-DOS or MS-DOS... it's
strange
=== Content of FDCONFIG.SYS : ============
DEVICE=C:\cpcdos\pilotes\dos\himemx.exe
Does himemx.exe work well with xmsdsk? Would it help to load xmsdsk with option
/T, like
XMSDSK 102400 /T /Y
in FDAUTO.BAT?
Also there is no EMM. Would you mind to do a mem /c and post the output?How
many RAM does your own program need?
SHELLHIGH=\COMFREE.COM /E:10240 /P=C:\FDAUTO.BAT
So you use a different COMMAND.COM. Did you try the FreeDOS version?
LASTDRIVE=z
DEVICE=C:\CPCDOS\PILOTES\DOS\IFSHLP.SYS
DEVICE=C:\CPCDOS\PILOTES\DOS\XMSDSK.EXE
rem DEVICE=C:\Cpcdos\pilotes\DOS\SMARTDRV.EXE /DOUBLE_BUFFER
Okay, so SMARTDRV isn't the problem :-)
=====================================
=== Content of FDAUTO.BAT :==============
SET LECTEUR=C:\
SET
PATH=%PATH%;%LECTEUR%CPCDOS\PILOTES\DOS;%LECTEUR%CPCDOS\SYSTEME;%LECTEUR%CPCDOS\PILOTES\RESEAU
KEYBFR
XMSDSK 102400 /y
======================================
Wow. That's all? Do you have another batch file that loads anything?
I remember that I loaded
NET INITIALIZELH SHARENETBIND.COMTCPTSR.EXETINYRFC.EXELH NMTSR.EXENET START
to make MS Client work for me. As I say my experience is a bit rusty, and you
may be right with everything, but maybe you experiment a bit with these drivers?
=== Content of PROTOCOL.INI : ============
[network.setup]
version=0x3110
netcard=nic,1,NIC,1
transport=tcpip,TCPIP
lana0=NIC,1,tcpip
[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP
[NIC]
DriverName=SIS190$
; This file gets inserted in to the driver's protocol.ini file.
; You can set hardcode lines for setting duplex/speed here.
[tcpip]
NBSessions=3
DEFAULTGATEWAY0 = 192 168 1 1
SUBNETMASK0 = 255 255 255 0
IPADDRESS0 = 192 168 1 11
DisableDHCP = 1
DriverName=TCPIP$
BINDINGS=NIC
LANABASE=0
TCPSEGMENTSIZE=1450
TCPWINDOWSIZE=4350
I have no experience with the above two settings. As you saw some strange
buffer behavior, being able to see files that were previously deleted: Maybe
you comment ";" them out and see if this is still happening? Another shot in
the dark..., sorry.
I think others should also take a look at this.
At least, this is an interesting problem :-)
kind regardsUlrich
WINS_SERVER0 = 192 168 1 1
[PKTDRV]
DriverName=PKTDRV$
Bindings=NIC
intvec=0x60
chainvec=0x66
=================================
=== Content of SYSTEM.INI : ==========
[network]
filesharing=yes
printsharing=yes
autologon=yes
computername = CPCDOS
lanroot = C:\cpcdos\pilotes\reseau
username=CPCDOS
workgroup = WORKGROUP
reconnect=no
dospophotkey=N
lmlogon=1
logondomain = WORKGROUP
preferredredir = Basic
autostart=basic
maxconnections=8
sizworkbuf=1498
[network drivers]
netcard = SIS190.DOS
transport = tcpdrv.dos,nemm.dosdevdir = C:\cpcdos\pilotes\reseau
LoadRMDrivers=yes
[386enh]
TimerCriticalSection=5000
UniqueDosPSP=TRUE
PSPIncrement=2
[Password Lists]
*Shares=C:\CPCDOS\PILOTES\RESEAU\Share000.PWL
CPCDOS=C:\CPCDOS\PILOTES\RESEAU\CPCDOS.PWL
==================================
From: uhan...@mainz-online.de
Date: Sun, 11 May 2014 03:58:48 +0200
To: freedos-user@lists.sourceforge.net
Subject: Re: [Freedos-user] Network problem with freebasic and freedos
Hi Sébastien,
I tend to forget these things but it may help to see your fdconfig.sys,
autoexec.bat, protocol.ini and system.ini.
If I understand you correctly, there's no problem if you work in FreeDOS with
the same file on the network share X:. You just cannot open this file correctly
with your freebasic program. I am not a developer so I can only guess: Do you
use any cache or buffer? Are the quotation marks correct? Can you still access
the file with your program? Would it be possible for your freebasic program to
copy the file to a temporary local folder, open it there, edit, save it, move
it back to x:. Maybe that's just crappy, but would it work?
Just a thought at 4 am.
freedos-devel might be a better place for this problem anyway.
regardsUlrich
Am 11.05.2014 um 01:04 schrieb Sébastien FAVIER
<sebastien.ordinat...@hotmail.fr>:I posted my problem in FreeBasic forum but
the problem is not of FreeBasic but FreeDos
can you please read the thread
:http://www.freebasic.net/forum/viewtopic.php?f=4&t=22469
Thank
====== Thread ======
Hi
I have a big problem
I have freedos with MSClient 3.0 installed and a network drive connected (x:)
With EDIT.COM I can edit files content on x: (no problem!)
but on my dos freebasic program (.Exe) can see files on x: but i can't read
content or write ! :(
I not have this problem with MSDOS 6 or 7 or DR-DOS, why?
can you help me please?
Thank's
===============
------------------------------------------------------------------------------
Is your legacy SCM system holding you back? Join Perforce May 7 to find out:
• 3 signs your SCM is hindering your productivity
• Requirements for releasing software faster
• Expert tips and advice for migrating your SCM now
http://p.sf.net/sfu/perforce_______________________________________________
Freedos-user mailing list
Freedos-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freedos-user
------------------------------------------------------------------------------
Is your legacy SCM system holding you back? Join Perforce May 7 to find out: •
3 signs your SCM is hindering your productivity • Requirements for releasing
software faster • Expert tips and advice for migrating your SCM now
http://p.sf.net/sfu/perforce
_______________________________________________ Freedos-user mailing list
Freedos-user@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/freedos-user------------------------------------------------------------------------------
Is your legacy SCM system holding you back? Join Perforce May 7 to find out:
• 3 signs your SCM is hindering your productivity
• Requirements for releasing software faster
• Expert tips and advice for migrating your SCM now
http://p.sf.net/sfu/perforce_______________________________________________
Freedos-user mailing list
Freedos-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freedos-user
------------------------------------------------------------------------------
Is your legacy SCM system holding you back? Join Perforce May 7 to find out:
• 3 signs your SCM is hindering your productivity
• Requirements for releasing software faster
• Expert tips and advice for migrating your SCM now
http://p.sf.net/sfu/perforce
_______________________________________________
Freedos-user mailing list
Freedos-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freedos-user
------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
_______________________________________________
Freedos-user mailing list
Freedos-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freedos-user
