Hi Martin, How are you doing?
Well, i think you should try to boot your previous iso image loading the cd driver it should create a d:\ or so that would have your files, but once again, i`m not really sure that will work out... any suggestion, folks? Geraldo Netto Non dvcor, dvco => Sapere Aude São Paulo, Brasil, -3gmt site: http://exdev.sf.net/ On 25 June 2012 20:47, Martin T <m4rtn...@gmail.com> wrote: > Geraldo, > > you are probably correct. If I use fdboot.img as a floppy drive image > like this: "qemu -fda /home/martin/FreeDOS/isolinux/fdboot.img -boot a > -m 128m" ..I end up on the very same "A:\>" prompt. So I should: > > A) mount the CD mount point on the "A:\" prompt > > Is this possible at all? As much as I browsed Wikipedia "List of > MS-DOS commands" and checked utilities available on the "A:\" prompt, > there was no possibility to mount or access files other than included > into fdboot.img floppy image. > > > B) add BIOS flashing tool and BIOS ROM files to fdboot.img > > New fdboot.img should be much larger than the original one because > flash tool itself is ~2MB. I did this: > > 1) Created 10MB raw file: > > root@debian64:~# dd if=/dev/zero of=10MB bs=10M count=1 > 1+0 records in > 1+0 records out > 10485760 bytes (10 MB) copied, 0,02243 s, 467 MB/s > root@debian64:~# > > 2) Created partition table to MBR using fdisk. Results are following: > > root@debian64:~# fdisk -lu 10MB > You must set cylinders. > You can do this from the extra functions menu. > > Disk 10MB: 0 MB, 0 bytes > 255 heads, 63 sectors/track, 0 cylinders, total 0 sectors > Units = sectors of 1 * 512 = 512 bytes > Sector size (logical/physical): 512 bytes / 512 bytes > I/O size (minimum/optimal): 512 bytes / 512 bytes > Disk identifier: 0x3009589f > > Device Boot Start End Blocks Id System > 10MB1 * 1 1606499 803249+ 6 FAT16 > root@debian64:~# > > > 3) Mounted this 10MB file with 32256 offset: > > root@debian64:~# echo 63*512 | bc -l > 32256 > root@debian64:~# losetup --offset 32256 /dev/loop1 10MB > root@debian64:~# > > 4) Created FAT16 file system: > > root@debian64:~# mkdosfs -F 16 -v /dev/loop1 > mkdosfs 3.0.9 (31 Jan 2010) > Loop device does not match a floppy size, using default hd params > /dev/loop1 has 64 heads and 32 sectors per track, > logical sector size is 512, > using 0xf8 media descriptor, with 20416 sectors; > file system has 2 16-bit FATs and 4 sectors per cluster. > FAT size is 20 sectors, and provides 5085 clusters. > There are 4 reserved sectors. > Root directory contains 512 slots and uses 32 sectors. > Volume ID is e2c98373, no volume label. > root@debian64:~# > > 5) Umounted 10MB image: > > root@debian64:~# losetup -d /dev/loop1 > root@debian64:~# > > 6) Copied MBR boot code to 10MB disk image: > > root@debian64:~# dd if=/usr/lib/syslinux/mbr.bin of=10MB bs=1 > count=440 conv=notrunc > 440+0 records in > 440+0 records out > 440 bytes (440 B) copied, 0,000622907 s, 706 kB/s > root@debian64:~# file -s 10MB > 10MB: x86 boot sector; partition 1: ID=0x6, active, starthead 0, > startsector 1, 1606499 sectors, code offset 0x31 > root@debian64:~# > > > 7) Installed syslinux to 10MB1 partition(that is the reason I used > 32256 byte offset): > > root@debian64:~# syslinux --install --offset 32256 10MB > root@debian64:~# > > 8) Mounted this 10MB1 partition: > > root@debian64:~# mount 10MB /media/10MBfiledir/ -o loop,offset=32256 > root@debian64:~# > > 9) Copied files from fdboot.img floppy image and few additional ones: > > root@debian64:~# ls /media/10MBfiledir/ > atiflash.exe CHOICE.EXE DEVLOAD.COM ELTORITO.SYS FDCONFIG.SYS > fdisk.ini HD5870.rom KERNEL.SYS MDISKCHK.COM SHSUCDX.COM > UIDE.SYS USB2 XMSSIZE.COM > AUTOEXEC.BAT COMMAND.COM EDIT.EXE FDAPM.COM FDISK.EXE > GETARGS.COM jemmex.exe ldlinux.sys SHSUCDHD.EXE TDSK.EXE > UPDATE.BAT vmsmount.exe > root@debian64:~# > > 10) Unmounted 10MB image: > > root@debian64:~# umount /media/10MBfiledir > root@debian64:~# > > As much as I understand, everything is done- 440 byte boot code in MBR > is present, partition table in MBR is present, syslinux is installed > to first partition, FAT16 file system is created to first partition > and finally all the files from floppy image are copied to this 10MB > image. However, I'm not able to boot into DOS with qemu. If I execute > qemu with "qemu -hda 10MB -boot c -m 128m" I end up with: > > Booting from Hard Disk... > Missing Operating System. > No bootable device. > > Image as well: http://i.imgur.com/G45gj.png > > > Any suggestions? > > > regards, > martin > > > 2012/6/25, Geraldo Netto <geraldone...@gmail.com>: >> Hi Martin, >> >> files are probably not on your a:\ but on your cd mount point (maybe d:\?) >> in order to add to your files on a:\ you will need to edit the img file >> which >> represents a virtual floppy disk as far as i know >> isolinux has the magic configuration which points out to the img file >> i said before... >> >> maybe Bern or Eric can give you more details... >> (or any other FreeDOS fellow, of course :P) >> >> Kind Regards and Best Wishes, >> >> Geraldo Netto >> Non dvcor, dvco => Sapere Aude >> São Paulo, Brasil, -3gmt >> site: http://exdev.sf.net/ >> >> On 24 June 2012 19:40, Martin T <m4rtn...@gmail.com> wrote: >>> I would like to add atiflash.exe(DOS application for flashing ATI >>> graphics cards BIOS) and few BIOS image files(each are 128KB in size) >>> to FreeDOS installation image. I downloaded 40MB "FreeDOS 1.1 Base" >>> installation image, mounted it as a loop device, copied all the files >>> from mount point to another directory, added atiflash.exe and ROM >>> files and created a new bootable FreeDOS ISO image using the >>> genisoimage.: >>> >>> # genisoimage -o freedos.iso -b isolinux/isolinux.bin -c >>> isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table >>> /home/martin/FreeDOS/ >>> >>> The new image boots fine and I'm able to access DOS prompt if I press >>> F8 and F5 at the startup(I'm not sure how this mode is called..). The >>> problem is that I can't find the atiflash.exe and ROM images: >>> >>> http://i.imgur.com/8Vtic.png >>> >>> In which directory those files should be on a ISO file in order to get >>> listed in "A:\" folder? >>> >>> >>> regards, >>> martin >>> >>> ------------------------------------------------------------------------------ >>> Live Security Virtual Conference >>> Exclusive live event will cover all the ways today's security and >>> threat landscape has changed and how IT managers can respond. Discussions >>> will include endpoint security, mobile security and the latest in malware >>> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ >>> _______________________________________________ >>> Freedos-user mailing list >>> Freedos-user@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/freedos-user >> >> ------------------------------------------------------------------------------ >> Live Security Virtual Conference >> Exclusive live event will cover all the ways today's security and >> threat landscape has changed and how IT managers can respond. Discussions >> will include endpoint security, mobile security and the latest in malware >> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ >> _______________________________________________ >> Freedos-user mailing list >> Freedos-user@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/freedos-user >> ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
