Hello. | > Does it run in IDE compatibility mode or in AHCI? I don't know. | But this IS IMPORTANT to know . None of existing DOS drivers supports AHCI.
But How to get this information ? ! ! ! ! = = = = = = = = = = = = = = = = Acer France support, Acer europe support does not give much information. After booting from "FREEDOS BOOTABLE CDROM" I can access the DVDROM (but ELTORITO is loaded) After booting from Hard Disk I cannot access DVDROM. But as I can access SATA HD. If both are SATA why can't I access DVDROM ? After clean up in FDCONFIG.SYS ---------------- !DOS=HIGH,UMB !DOSDATA=UMB DEVICE=C:\FDOS\BIN\HIMEM.EXE DEVICE=C:\FDOS\BIN\EMM386.EXE NOEMS X=TEST DEVICEHIGH=C:\DRIVERS\UIDE.SYS /D:L633C SHELLHIGH=C:\FDOS\BIN\COMMAND.COM C:\FDOS\BIN /E:1024 /P=C:\AUTOEXEC.BAT in autoexec.bat --------------- LH FDAPM APMDOS LH DISPLAY CON=(EGA,,1) MODE CON CP PREP=........... LH MODE CON CP SEL=858 SHCDX33E.COM /D:L633C,W <--- W stand for fiwing drive letter W LH KEYB FR,,keyboard.sys LH DOSLFN On screen during boot : ------------------------ UIDE, 11-27-2009. 80-MB Cache, CD/DVD name is L633C Disks run by the bios : 1 Skipping APM MODE Select Codepage 850 SHCDX33E, 9-July-2009. Based on V3.03 SHSUCDX by ................ V1.4B SHSUCDX by ..................... Cannot open CD Driver L633C. SHCDX33E cannot load! KEYB FR 858 CUTEMOUSE DOSFLN high loaded Regards ----- Mail Original ----- De: "dos386" <dos...@gmail.com> À: freedos-user@lists.sourceforge.net Envoyé: Lundi 28 Décembre 2009 08h08:05 GMT +01:00 Amsterdam / Berlin / Berne / Rome / Stockholm / Vienne Objet: Re: [Freedos-user] freedos - Modern sata dvd dual layer not found > made an install of freedos 1.0 from bootable cd following > screen instruction without any problem. Nevertheless, you should update a few things: HIMEM, EMM386, CTMOUSE, ... > Also, throw away XDMA.SYS, it shouldn't be needed and might actually cause > problems. NO. XDMA 3.1 is good (3.3 is buggy). > XDMA V3.3, 2-15-2006 > No ultraDMA controller; XDMA not loaded Doesn't work anyway, either native (XDMA doesn't support, later drivers do) or AHCI (later drivers don't either). > UIDE.SYS has its same abilities built-in and caches harddisks and optical > drives. Right, don't use any other HD or CD driver besides UIDE. > I think it is a SATA-only system. Shouldn't be critical ... > Does it run in IDE compatibility mode or in AHCI? I don't know. But this IS IMPORTANT to know. None of existing DOS drivers supports AHCI. -- ~~~ wow ~~~ ------------------------------------------------------------------------------ This SF.Net email is sponsored by the Verizon Developer Community Take advantage of Verizon's best-in-class app development support A streamlined, 14 day to market process makes app distribution fast and easy Join now and get one step closer to millions of Verizon customers http://p.sf.net/sfu/verizon-dev2dev _______________________________________________ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
------------------------------------------------------------------------------ This SF.Net email is sponsored by the Verizon Developer Community Take advantage of Verizon's best-in-class app development support A streamlined, 14 day to market process makes app distribution fast and easy Join now and get one step closer to millions of Verizon customers http://p.sf.net/sfu/verizon-dev2dev
_______________________________________________ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
