Opa Paulo,
Peguei o equipamento ontem e nada. Não consegui resolver ainda. Mesmo
com o FreeBSD 8.2-STABLE o equipamento se auto desliga randomicamente.
Abaixo o dmesg dela:
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-STABLE #0: Thu Jun 23 04:13:40 BRT 2011
r...@zeus.linuxinfo.com.br:/usr/obj/usr/src/sys/GONDIM amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz (2133.32-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x206c2 Family = 6 Model = 2c
Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 8589934592 (8192 MB)
avail memory = 8150536192 (7772 MB)
ACPI APIC Table: <INTEL S5500BC >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 18
cpu3 (AP): APIC ID: 20
cpu4 (AP): APIC ID: 32
cpu5 (AP): APIC ID: 34
cpu6 (AP): APIC ID: 50
cpu7 (AP): APIC ID: 52
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL S5500BC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x1000-0x101f mem
0xb1a00000-0xb1a1ffff,0xb1900000-0xb19fffff,0xb1a20000-0xb1a23fff irq 28
at device 0.0 on pci1
em0: Using MSIX interrupts with 3 vectors
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
em0: Ethernet address: 00:1e:67:07:9d:cd
pcib2: <ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver
attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
em1: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x20e0-0x20ff mem
0xb1b00000-0xb1b1ffff,0xb1b43000-0xb1b43fff irq 20 at device 25.0 on pci0
em1: Using an MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:1e:67:07:9d:cc
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0x20c0-0x20df
irq 19 at device 26.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0x20a0-0x20bf
irq 19 at device 26.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0x2080-0x209f
irq 19 at device 26.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem
0xb1b41000-0xb1b413ff irq 19 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem
0xb0000000-0xb0ffffff,0xb1800000-0xb1803fff,0xb1000000-0xb17fffff irq 16
at device 0.0 on pci6
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0x2060-0x207f
irq 16 at device 29.0 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0x2040-0x205f
irq 16 at device 29.1 on pci0
uhci4: [ITHREAD]
usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0x2020-0x203f
irq 16 at device 29.2 on pci0
uhci5: [ITHREAD]
usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem
0xb1b40000-0xb1b403ff irq 16 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port
0x2158-0x215f,0x216c-0x216f,0x2150-0x2157,0x2168-0x216b,0x2130-0x213f,0x2120-0x212f
irq 18 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ICH10 SATA300 controller> port
0x2148-0x214f,0x2164-0x2167,0x2140-0x2147,0x2160-0x2163,0x2110-0x211f,0x2100-0x210f
irq 21 at device 31.5 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
acpi_button0: <Sleep Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
qpi0: <QPI system bus> on motherboard
pcib8: <QPI Host-PCI bridge> pcibus 255 on qpi0
pci255: <PCI bus> on pcib8
pcib9: <QPI Host-PCI bridge> pcibus 254 on qpi0
pci254: <PCI bus> on pcib9
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff on isa0
atkbd: unable to set the command byte.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to set the command byte.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, rule-based
forwarding enabled, default to accept, logging disabled
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ad4: 953869MB <Seagate ST31000528AS CC44> at ata2-master UDMA100 SATA 3Gb/s
acd0: DVDR <HL-DT-ST DVDRAM GH22NS50/TN03> at ata3-master UDMA100 SATA
1.5Gb/s
lapic20: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic34: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic52: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
lapic18: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic32: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic50: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1
usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ad4s1a
WARNING: / was not properly dismounted
ugen0.2: <CHESEN> at usbus0
ukbd0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus0
kbd2 at ukbd0
uhid0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus0
ugen2.2: <American Megatrends Inc.> at usbus2
ukbd1: <Keyboard Interface> on usbus2
kbd3 at ukbd1
ums0: <Mouse Interface> on usbus2
ums0: 3 buttons and [Z] coordinates ID=0
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
em0: link state changed to UP
Esses warning é porque ela desliga do nada e aí obviamente lá vai um
fsck e pior que demora pacas porque o disco é de 1Tb.
Em 17/06/2011 17:32, Paulo Henrique - BSDs Brasil escreveu:
> Tem algum dmesg para poder ver o que a placa-mãe possui.
> NO site da intel a descrićão é muito resumida, o que diz que ela possui
> o que de fato o FreeBSD suporta, não sei quanto IPMI2.0.
> Att.
> Marcelo Gondim wrote:
>> Em 17/06/2011 15:21, Paulo Henrique - BSDs Brasil escreveu:
>>
>>> Inicia o FreeBSD em modo debug e manda a saida para nós.
>>> Informaćão quanto ao solucionamento importantissima para a lista.
>>>
>>> Att.
>>>
>>>
>> Opa Paulo,
>>
>> Vou tentar mas o problema dá randomicamente. O sistema inicia normal,
>> fica lá no login tranqüilo e do nada desliga e liga.
>> Mas com certeza descobrindo uma solução estarei postando aqui. O
>> equipamento está agora em um laboratório no Rio em testes para
>> descobrirmos o motivo ou pelo menos tentarmos.
>>
>>
>>> Marcelo Gondim wrote:
>>>
>>>> Olá pessoal,
>>>>
>>>> Comprei um equipamento dual Quad Xeon e esse usa uma motherboard
>>>> S5500BCR que é dual processada. O que ocorre é o seguinte:
>>>>
>>>> Na instalação do FreeBSD 8.2-release a máquina simplesmente desliga dá
>>>> uns apitos indicando problema e re-inicia novamente sozinha. Consegui
>>>> com muito custo terminar a instalação do sistema mas não estou
>>>> conseguindo atualizar para a versão 8.2-stable porque ela sempre
>>>> re-inicia antes mesmo de eu completar. Sei que muitos vão achar que é um
>>>> problema no hardware ou elétrica, também achei isso e troquei fonte,
>>>> memória, processador e até a motherboard e nada resolveu. Testei com
>>>> outros sistemas como windows 2008 e linux e o problema não ocorre mas
>>>> com o FreeBSD está acontecendo isso. Alguém faz idéia do que seja?
>>>> Porque procurei nos logs e não vi nada, dmesg também nada.
>>>> Estou pensando em tirar o hd, colocar em outro equipamento, atualizar
>>>> para a 8.2-stable e colocar de volta para ver se acontece o mesmo problema.
>>>>
>>>> Alguém passou por esse pepino?
>>>>
>>>> []´s
>>>>
>>>> Gondim
>>>> -------------------------
>>>> Histórico: http://www.fug.com.br/historico/html/freebsd/
>>>> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
>>>>
>>>>
>>> -------------------------
>>> Histórico: http://www.fug.com.br/historico/html/freebsd/
>>> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
>>>
>> -------------------------
>> Histórico: http://www.fug.com.br/historico/html/freebsd/
>> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
>>
> -------------------------
> Histórico: http://www.fug.com.br/historico/html/freebsd/
> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
-------------------------
Histórico: http://www.fug.com.br/historico/html/freebsd/
Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
