Ola Pessoal,
FreeBSD x.com.br 8.2-STABLE FreeBSD 8.2-STABLE #0: Fri Feb 25 16:25:02
BRT 2011 r...@x.com.br:/usr/obj/usr/src/sys/GENERIC amd64
Configurei no rc.conf :
ifconfig_bce0="inet"
ifconfig_bce1="inet"
ifconfig_em0="inet"
ifconfig_em1="inet"
cloned_interfaces="lagg0 lagg1"
ifconfig_lagg0="laggproto lacp laggport bce0 laggport bce1 200.x.x.x
netmask 255.255.255.192"
ifconfig_lagg1="laggproto lacp laggport em0 laggport em1 187.x.x.x
netmask 255.255.255.248"
A princípio parece tudo certo, vejam:
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4>
ether 00:1d:09:68:dd:63
inet 200.x.x.x netmask 0xffffffc0 broadcast 200.x.x.x
media: Ethernet autoselect
status: active
laggproto lacp
laggport: bce1 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
laggport: bce0 flags=18<COLLECTING,DISTRIBUTING>
lagg1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
ether 00:0e:0c:b5:69:b2
inet 187.x.x.x netmask 0xfffffff8 broadcast 187.x.x.x
media: Ethernet autoselect
status: active
laggproto lacp
laggport: em1 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
laggport: em0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
[root@leao /usr/local/etc/quagga]# ifconfig bce0
bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4>
ether 00:1d:09:68:dd:63
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
Depois reparei que a bce0 não está active. No mrtg gerando os gráficos
ela mostra as outras interfaces (em0,em1,lagg0,lagg1,bce1) com tráfego
menos a bce0. É normal ou não isto? Está funcionando mas será que o
link aggregation realmente funcionou na lagg0 ?
Alguma idéia?
Obrigado,
Joel
-------------------------
Histórico: http://www.fug.com.br/historico/html/freebsd/
Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
