Então Renato, infelizmente meu conhecimento é um pouco limitado sobre tais hardware, a unica forma que sei identificar a questão de Dual-NorthBridge é através da constatação de Dois Dissipadores de igual tamanho proximo cada um de um dos bancos de memoria e um terceiro dissipador de menor tamanho proximo das portas sata/pci. Na descrição do componente tambem existe a referencia quanto a ser dual northbirdge ou não. No caso da Supermicro a seguinte descrição constata que a placa é dual northbridge ( 2. Dual Intel® 5520 (Tylersburg) Chipsets ). Ja no caso da Dell, não da para saber nem qual o modelo do chip das NICs com precisão, sou muito pé atraz com esses hardware de caixa por causa disso. A chance de haver alguma incompatibilidade é muito grande. Se ao abrir o servidor a placa-mãe possuir tres dissipadores de tamanho avantajado e dois deles forem de igual tamanho e proximo dos bancos de memoria, então a placa-mãe é dual NorthBridge.
Att. Em 14/2/2011 10:18, Renato Frederick escreveu: > Segue um dmesg de um r710, se ajudar vocês a detectar a questão de > northbridge: > > Copyright (c) 1992-2010 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 8.1-STABLE #2: Sun Oct 24 01:54:50 BRST 2010 > root@XXXXXXXX:/usr/src/sys/amd64/compile/FIREWALL amd64 > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2394.01-MHz K8-class > CPU) > Origin = "GenuineIntel" Id = 0x206c2 Family = 6 Model = 2c Stepping = > 2 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b17>,DCA,SSE4.1,SSE4.2,POPCNT,AESNI> > AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> > AMD Features2=0x1<LAHF> > TSC: P-state invariant > real memory = 4294967296 (4096 MB) > avail memory = 4101509120 (3911 MB) > ACPI APIC Table:<DELL PE_SC3> > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs > FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads > cpu0 (BSP): APIC ID: 32 > cpu1 (AP): APIC ID: 33 > cpu2 (AP): APIC ID: 34 > cpu3 (AP): APIC ID: 35 > cpu4 (AP): APIC ID: 50 > cpu5 (AP): APIC ID: 51 > cpu6 (AP): APIC ID: 52 > cpu7 (AP): APIC ID: 53 > ioapic1: Changing APIC ID to 1 > ioapic0<Version 2.0> irqs 0-23 on motherboard > ioapic1<Version 2.0> irqs 32-55 on motherboard > kbd1 at kbdmux0 > cryptosoft0:<software crypto> on motherboard > acpi0:<DELL PE_SC3> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0:<24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0:<ACPI CPU> on acpi0 > cpu1:<ACPI CPU> on acpi0 > cpu2:<ACPI CPU> on acpi0 > cpu3:<ACPI CPU> on acpi0 > cpu4:<ACPI CPU> on acpi0 > cpu5:<ACPI CPU> on acpi0 > cpu6:<ACPI CPU> on acpi0 > cpu7:<ACPI CPU> on acpi0 > acpi_hpet0:<High Precision Event Timer> iomem 0xfed00000-0xfed003ff on > acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > pcib0:<ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0:<ACPI PCI bus> on pcib0 > pcib1:<ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1:<ACPI PCI bus> on pcib1 > bce0:<Broadcom NetXtreme II BCM5716 1000Base-T (C0)> mem > 0xda000000-0xdbffffff irq 36 at device 0.0 on pci1 > miibus0:<MII bus> on bce0 > brgphy0:<BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bce0: Ethernet address: 84:2b:2b:4d:33:aa > bce0: [ITHREAD] > bce1:<Broadcom NetXtreme II BCM5716 1000Base-T (C0)> mem > 0xdc000000-0xddffffff irq 48 at device 0.1 on pci1 > miibus1:<MII bus> on bce1 > brgphy1:<BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus1 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bce1: Ethernet address: 84:2b:2b:4d:33:ab > bce1: [ITHREAD] > pcib2:<ACPI PCI-PCI bridge> at device 3.0 on pci0 > pci2:<ACPI PCI bus> on pcib2 > mpt0:<LSILogic SAS/SATA Adapter> port 0xfc00-0xfcff mem > 0xdfeec000-0xdfeeffff,0xdfef0000-0xdfefffff irq 32 at device 0.0 on pci2 > mpt0: [ITHREAD] > mpt0: MPI Version=1.5.18.0 > mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 ) > mpt0: 1 Active Volume (2 Max) > mpt0: 3 Hidden Drive Members (14 Max) > pcib3:<ACPI PCI-PCI bridge> at device 7.0 on pci0 > pci3:<ACPI PCI bus> on pcib3 > igb0:<Intel(R) PRO/1000 Network Connection version - 2.0.1> port > 0xecc0-0xecdf mem > 0xdf3c0000-0xdf3dffff,0xdf400000-0xdf7fffff,0xdf3b8000-0xdf3bbfff irq 38 at > device 0.0 on pci3 > igb0: Using MSIX interrupts with 9 vectors > igb0: [ITHREAD] > igb0: [ITHREAD] > igb0: [ITHREAD] > igb0: [ITHREAD] > igb0: [ITHREAD] > igb0: [ITHREAD] > igb0: [ITHREAD] > igb0: [ITHREAD] > igb0: [ITHREAD] > igb0: Ethernet address: 00:1b:21:69:6a:98 > igb1:<Intel(R) PRO/1000 Network Connection version - 2.0.1> port > 0xece0-0xecff mem > 0xdf3e0000-0xdf3fffff,0xdf800000-0xdfbfffff,0xdf3bc000-0xdf3bffff irq 45 at > device 0.1 on pci3 > igb1: Using MSIX interrupts with 9 vectors > igb1: [ITHREAD] > igb1: [ITHREAD] > igb1: [ITHREAD] > igb1: [ITHREAD] > igb1: [ITHREAD] > igb1: [ITHREAD] > igb1: [ITHREAD] > igb1: [ITHREAD] > igb1: [ITHREAD] > igb1: Ethernet address: 00:1b:21:69:6a:99 > pci0:<base peripheral, interrupt controller> at device 20.0 (no driver > attached) > pci0:<base peripheral, interrupt controller> at device 20.1 (no driver > attached) > pci0:<base peripheral, interrupt controller> at device 20.2 (no driver > attached) > uhci0:<Intel 82801JI (ICH10) USB controller USB-D> port 0xdc40-0xdc5f irq > 17 at device 26.0 on pci0 > uhci0: [ITHREAD] > usbus0:<Intel 82801JI (ICH10) USB controller USB-D> on uhci0 > uhci1:<Intel 82801JI (ICH10) USB controller USB-E> port 0xdc60-0xdc7f irq > 18 at device 26.1 on pci0 > uhci1: [ITHREAD] > usbus1:<Intel 82801JI (ICH10) USB controller USB-E> on uhci1 > ehci0:<Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem > 0xdfcff800-0xdfcffbff irq 19 at device 26.7 on pci0 > ehci0: [ITHREAD] > usbus2: EHCI version 1.0 > usbus2:<Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0 > uhci2:<Intel 82801JI (ICH10) USB controller USB-A> port 0xdc80-0xdc9f irq > 21 at device 29.0 on pci0 > uhci2: [ITHREAD] > usbus3:<Intel 82801JI (ICH10) USB controller USB-A> on uhci2 > uhci3:<Intel 82801JI (ICH10) USB controller USB-B> port 0xdca0-0xdcbf irq > 20 at device 29.1 on pci0 > uhci3: [ITHREAD] > usbus4:<Intel 82801JI (ICH10) USB controller USB-B> on uhci3 > uhci4:<Intel 82801JI (ICH10) USB controller USB-C> port 0xdcc0-0xdcdf irq > 21 at device 29.2 on pci0 > uhci4: [ITHREAD] > usbus5:<Intel 82801JI (ICH10) USB controller USB-C> on uhci4 > uhci5:<Intel 82801JI (ICH10) USB controller USB-F> port 0xdce0-0xdcff irq > 20 at device 29.3 on pci0 > uhci5: [ITHREAD] > usbus6:<Intel 82801JI (ICH10) USB controller USB-F> on uhci5 > ehci1:<Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem > 0xdfcffc00-0xdfcfffff irq 21 at device 29.7 on pci0 > ehci1: [ITHREAD] > usbus7: EHCI version 1.0 > usbus7:<Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1 > pcib4:<ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci4:<ACPI PCI bus> on pcib4 > vgapci0:<VGA-compatible display> mem > 0xd9800000-0xd9ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at > device 3.0 on pci4 > isab0:<PCI-ISA bridge> at device 31.0 on pci0 > isa0:<ISA bus> on isab0 > atapci0:<Intel ICH10 SATA300 controller> port > 0xd8e0-0xd8e7,0xd8d0-0xd8d3,0xd8e8-0xd8ef,0xd8d4-0xd8d7,0xdc00-0xdc0f,0xdc10-0xdc1f > irq 23 at device 31.2 on pci0 > atapci0: [ITHREAD] > ata2:<ATA channel 0> on atapci0 > ata2: [ITHREAD] > ata3:<ATA channel 1> on atapci0 > ata3: [ITHREAD] > atapci1:<Intel ICH10 SATA300 controller> port > 0xd8f0-0xd8f7,0xd8d8-0xd8db,0xd8f8-0xd8ff,0xd8dc-0xd8df,0xdc20-0xdc2f,0xdc30-0xdc3f > irq 22 at device 31.5 on pci0 > atapci1: [ITHREAD] > ata4:<ATA channel 0> on atapci1 > ata4: [ITHREAD] > ata5:<ATA channel 1> on atapci1 > ata5: [ITHREAD] > atrtc0:<AT realtime clock> port 0x70-0x7f irq 8 on acpi0 > uart0:<16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > uart0: [FILTER] > uart1:<16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 > uart1: [FILTER] > orm0:<ISA Option ROMs> at iomem > 0xc0000-0xc7fff,0xce000-0xcefff,0xec000-0xeffff on isa0 > sc0:<System console> at flags 0x100 on isa0 > sc0: VGA<16 virtual consoles, flags=0x300> > vga0:<Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > atkbdc0:<Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0:<AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > est0:<Enhanced SpeedStep Frequency Control> on cpu0 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 13 > device_attach: est0 attach returned 6 > p4tcc0:<CPU Frequency Thermal Control> on cpu0 > est1:<Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 13 > device_attach: est1 attach returned 6 > p4tcc1:<CPU Frequency Thermal Control> on cpu1 > est2:<Enhanced SpeedStep Frequency Control> on cpu2 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 13 > device_attach: est2 attach returned 6 > p4tcc2:<CPU Frequency Thermal Control> on cpu2 > est3:<Enhanced SpeedStep Frequency Control> on cpu3 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 13 > device_attach: est3 attach returned 6 > p4tcc3:<CPU Frequency Thermal Control> on cpu3 > est4:<Enhanced SpeedStep Frequency Control> on cpu4 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 13 > device_attach: est4 attach returned 6 > p4tcc4:<CPU Frequency Thermal Control> on cpu4 > est5:<Enhanced SpeedStep Frequency Control> on cpu5 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 13 > device_attach: est5 attach returned 6 > p4tcc5:<CPU Frequency Thermal Control> on cpu5 > est6:<Enhanced SpeedStep Frequency Control> on cpu6 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 13 > device_attach: est6 attach returned 6 > p4tcc6:<CPU Frequency Thermal Control> on cpu6 > est7:<Enhanced SpeedStep Frequency Control> on cpu7 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 13 > device_attach: est7 attach returned 6 > p4tcc7:<CPU Frequency Thermal Control> on cpu7 > Timecounters tick every 1.000 msec > IPsec: Initialized Security Association Processing. > ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based > forwarding enabled, default to accept, logging disabled > load_dn_sched dn_sched FIFO loaded > load_dn_sched dn_sched PRIO loaded > load_dn_sched dn_sched QFQ loaded > load_dn_sched dn_sched RR loaded > load_dn_sched dn_sched WF2Q+ loaded > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 480Mbps High Speed USB v2.0 > usbus3: 12Mbps Full Speed USB v1.0 > usbus4: 12Mbps Full Speed USB v1.0 > usbus5: 12Mbps Full Speed USB v1.0 > usbus6: 12Mbps Full Speed USB v1.0 > usbus7: 480Mbps High Speed USB v2.0 > mpt0:vol0(mpt0:0:0): Settings ( Hot-Plug-Spares High-Priority-ReSync ) > mpt0:vol0(mpt0:0:0): Using Spare Pool: 0 > mpt0:vol0(mpt0:0:0): 2 Members: > (mpt0:1:9:0): Primary Online > (mpt0:1:1:0): Secondary Online > mpt0:vol0(mpt0:0:0): RAID-1 - Optimal > mpt0:vol0(mpt0:0:0): Status ( Enabled ) > (mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:0:0) > (mpt0:vol0:1): Online > (mpt0:vol0:0): Physical (mpt0:0:9:0), Pass-thru (mpt0:1:1:0) > (mpt0:vol0:0): Online > (xpt0:mpt0:1:-1:-1): rescan already queued > ugen0.1:<Intel> at usbus0 > uhub0:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > ugen1.1:<Intel> at usbus1 > uhub1:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen2.1:<Intel> at usbus2 > uhub2:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 > ugen3.1:<Intel> at usbus3 > uhub3:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 > ugen4.1:<Intel> at usbus4 > uhub4:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 > ugen5.1:<Intel> at usbus5 > uhub5:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 > ugen6.1:<Intel> at usbus6 > uhub6:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 > ugen7.1:<Intel> at usbus7 > uhub7:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 > uhub0: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub3: 2 ports with 2 removable, self powered > uhub4: 2 ports with 2 removable, self powered > uhub5: 2 ports with 2 removable, self powered > uhub6: 2 ports with 2 removable, self powered > uhub2: 4 ports with 4 removable, self powered > uhub7: 4 ports with 4 removable, self powered > acd0: DVDROM<TEAC DVD-ROM DV-28SW/R.2A> at ata4-master UDMA100 SATA 1.5Gb/s > da0 at mpt0 bus 0 scbus0 target 0 lun 0 > da0:<Dell VIRTUAL DISK 1028> Fixed Direct Access SCSI-5 device > da0: 300.000MB/s transfers > da0: Command Queueing enabled > da0: 139392MB (285474816 512 byte sectors: 255H 63S/T 17769C) > ses0 at mpt0 bus 0 scbus0 target 8 lun 0 > ses0:<DP BACKPLANE 1.07> Fixed Enclosure Services SCSI-5 device > ses0: 300.000MB/s transfers > ses0: SCSI-3 SES Device > pass2 at mpt0 bus 1 scbus1 target 0 lun 0 > pass2:<SEAGATE ST3146356SS HS10> Fixed Uninstalled SCSI-5 device > pass2: 300.000MB/s transfers > pass2: Command Queueing enabled > SMP: AP CPU #1 Launched! > SMP: AP CPU #6 Launched! > SMP: AP CPU #5 Launched! > SMP: AP CPU #7 Launched! > SMP: AP CPU #3 Launched! > SMP: AP CPU #4 Launched! > SMP: AP CPU #2 Launched! > Root mount waiting for: usbus2 > ugen2.2:<vendor 0x0424> at usbus2 > uhub8:<vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on > usbus2 > ugen0.2:<Avocent> at usbus0 > ukbd0:<EP1 Interrupt> on usbus0 > kbd2 at ukbd0 > ums0:<EP2 Interrupt> on usbus0 > ums0: 5 buttons and [XYZ] coordinates ID=1 > Root mount waiting for: usbus2 > uhub8: 4 ports with 4 removable, self powered > Trying to mount root from ufs:/dev/da0s1a > > > > > -----Mensagem Original----- > From: Paulo Henrique BSD Brasil > Sent: Monday, February 14, 2011 10:42 AM > To: freebsd@fug.com.br > Subject: Re: [FUG-BR] RES: OT: dica para hardware de servidor > > Então Eduardo, as duas Motherboards da SuperMicro são Dual Northbridges. > Em pesquisa o Dell R610 apresenta compatibilidade com FreeBSD, pois tem > uma empresa de Host em USA que dispôem de soluções comerciais sobre esse > hardware e FreeBSD. > > Creio que o R710 tambem venha atender, mais o problemas de maquinas de > grife é que são meio caixa preta para poder saber se a placa-mãe possui > dois Northbridges. > > Mais quem tiver e diposnibilizar informações sobre eles.. sou agradecido.. > > Att. Paulo Henrique. > Em 14/2/2011 09:35, Eduardo Schoedler escreveu: >> Escolha uma MoBo com 2 'northbridges', a performance fica melhor com >> varias NICs. >> >> -- >> Eduardo Schoedler >> Enviado via iPhone >> >> Em 13/02/2011, às 23:17, Paulo Henrique - YM<paulo.rd...@yahoo.com.br> >> escreveu: >> >>> Estou analisando uma solução para roteador baseado em PC, contudo em um >>> periodo muito breve o mesmo passará para roteador de borda, >>> Receonheço quanto a compatibilidade da Supermicro com o FreeBSD, mas não >>> vejo problema de ter certeza antes. >>> A placa-mãe X8DAH+-F >>> (http://www.supermicro.com/products/motherboard/QPI/5500/X8DAH_-F.cfm ) >>> ou a X8DAH+ ( >>> http://www.supermicro.com/products/motherboard/QPI/5500/X8DAH_.cfm ) >>> possui uma boa compatibilidade com o FreeBSD ? >>> >>> Uma outra opção seria Dell ou HP, contudo é meio caixa preta as >>> especificações dos servidores, se alguem possuir informações de >>> compatibilidade do FreeBSD em modelos dessas empresas e disponibilizar a >>> serie ( melhor ser a configuração deles ) será de grande valia. >>> >>> Agradeço a atenção de todos. >>> >>> Att. Paulo Henrique. >>> >>> Em 29/12/2010 16:54, Bruno Torres Viana escreveu: >>>> Senhores, não vamos perder o foco da thread. >>>> >>>> Em 29 de dezembro de 2010 16:22, Celso >>>> Viana<celso.via...@gmail.com>escreveu: >>>> >>>>>> MACBOOK PRO :D >>>>>> >>>>>> Frederico Boechat >>>>>> >>>>> Frederico, >>>>> >>>>> Esqueci de mencionar: PC com EFI... >>>>> >>>>> Thanks!!! >>>>> >>>>> -- >>>>> Celso Vianna >>>>> BSD User: 51318 >>>>> http://www.bsdcounter.org >>>>> >>>>> 63 8404-8559 >>>>> Palmas/TO >>>>> ------------------------- >>>>> Histórico: http://www.fug.com.br/historico/html/freebsd/ >>>>> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >>>>> >>> ------------------------- >>> Histórico: http://www.fug.com.br/historico/html/freebsd/ >>> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd >> ------------------------- >> Histórico: http://www.fug.com.br/historico/html/freebsd/ >> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd > > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd