Matheus, minha consultora é:
Priscila Silveira | Dell MB|BSDR – Grupo de Contas Executivas
Representante interno de vendas | Office: +55 (51) 3274-5880 | Fax: +55
(51) 2104-5021
MB-Grupo de Contas Executivas | 08009703366 Ramal 5880
* priscila_silveira (at) dell.com
Estou rodando 2 firewall com T410 + CARP + BGP e blablablablablabla,
100%.. o dmesg dele:
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-STABLE #2: Sun Oct 24 01:54:50 BRST 2010
r...@xxxxxxxxx:/usr/src/sys/amd64/compile/FIREWALL amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2394.01-MHz K8-class
CPU)
Origin = "GenuineIntel" Id = 0x206c2 Family = 6 Model = 2c Stepping =
2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b17>,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4101509120 (3911 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 32
cpu1 (AP): APIC ID: 33
cpu2 (AP): APIC ID: 34
cpu3 (AP): APIC ID: 35
cpu4 (AP): APIC ID: 50
cpu5 (AP): APIC ID: 51
cpu6 (AP): APIC ID: 52
cpu7 (AP): APIC ID: 53
ioapic1: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
bce0: <Broadcom NetXtreme II BCM5716 1000Base-T (C0)> mem
0xda000000-0xdbffffff irq 36 at device 0.0 on pci1
miibus0: <MII bus> on bce0
brgphy0: <BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce0: Ethernet address: 84:2b:2b:4d:33:aa
bce0: [ITHREAD]
bce1: <Broadcom NetXtreme II BCM5716 1000Base-T (C0)> mem
0xdc000000-0xddffffff irq 48 at device 0.1 on pci1
miibus1: <MII bus> on bce1
brgphy1: <BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce1: Ethernet address: 84:2b:2b:4d:33:ab
bce1: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic SAS/SATA Adapter> port 0xfc00-0xfcff mem
0xdfeec000-0xdfeeffff,0xdfef0000-0xdfefffff irq 32 at device 0.0 on pci2
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.18.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 1 Active Volume (2 Max)
mpt0: 3 Hidden Drive Members (14 Max)
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
igb0: <Intel(R) PRO/1000 Network Connection version - 2.0.1> port
0xecc0-0xecdf mem
0xdf3c0000-0xdf3dffff,0xdf400000-0xdf7fffff,0xdf3b8000-0xdf3bbfff irq 38 at
device 0.0 on pci3
igb0: Using MSIX interrupts with 9 vectors
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: Ethernet address: 00:1b:21:69:6a:98
igb1: <Intel(R) PRO/1000 Network Connection version - 2.0.1> port
0xece0-0xecff mem
0xdf3e0000-0xdf3fffff,0xdf800000-0xdfbfffff,0xdf3bc000-0xdf3bffff irq 45 at
device 0.1 on pci3
igb1: Using MSIX interrupts with 9 vectors
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: Ethernet address: 00:1b:21:69:6a:99
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver
attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xdc40-0xdc5f irq
17 at device 26.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xdc60-0xdc7f irq
18 at device 26.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem
0xdfcff800-0xdfcffbff irq 19 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
uhci2: <Intel 82801JI (ICH10) USB controller USB-A> port 0xdc80-0xdc9f irq
21 at device 29.0 on pci0
uhci2: [ITHREAD]
usbus3: <Intel 82801JI (ICH10) USB controller USB-A> on uhci2
uhci3: <Intel 82801JI (ICH10) USB controller USB-B> port 0xdca0-0xdcbf irq
20 at device 29.1 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801JI (ICH10) USB controller USB-B> on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-C> port 0xdcc0-0xdcdf irq
21 at device 29.2 on pci0
uhci4: [ITHREAD]
usbus5: <Intel 82801JI (ICH10) USB controller USB-C> on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-F> port 0xdce0-0xdcff irq
20 at device 29.3 on pci0
uhci5: [ITHREAD]
usbus6: <Intel 82801JI (ICH10) USB controller USB-F> on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem
0xdfcffc00-0xdfcfffff irq 21 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> mem
0xd9800000-0xd9ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at
device 3.0 on pci4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port
0xd8e0-0xd8e7,0xd8d0-0xd8d3,0xd8e8-0xd8ef,0xd8d4-0xd8d7,0xdc00-0xdc0f,0xdc10-0xdc1f
irq 23 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
atapci1: <Intel ICH10 SATA300 controller> port
0xd8f0-0xd8f7,0xd8d8-0xd8db,0xd8f8-0xd8ff,0xd8dc-0xd8df,0xdc20-0xdc2f,0xdc30-0xdc3f
irq 22 at device 31.5 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xce000-0xcefff,0xec000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est4 attach returned 6
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est5 attach returned 6
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est6 attach returned 6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 13
device_attach: est7 attach returned 6
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based
forwarding enabled, default to accept, logging disabled
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
mpt0:vol0(mpt0:0:0): Settings ( Hot-Plug-Spares High-Priority-ReSync )
mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
mpt0:vol0(mpt0:0:0): 2 Members:
(mpt0:1:9:0): Primary Online
(mpt0:1:1:0): Secondary Online
mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
mpt0:vol0(mpt0:0:0): Status ( Enabled )
(mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:0:0)
(mpt0:vol0:1): Online
(mpt0:vol0:0): Physical (mpt0:0:9:0), Pass-thru (mpt0:1:1:0)
(mpt0:vol0:0): Online
(xpt0:mpt0:1:-1:-1): rescan already queued
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub7: 4 ports with 4 removable, self powered
acd0: DVDROM <TEAC DVD-ROM DV-28SW/R.2A> at ata4-master UDMA100 SATA 1.5Gb/s
da0 at mpt0 bus 0 scbus0 target 0 lun 0
da0: <Dell VIRTUAL DISK 1028> Fixed Direct Access SCSI-5 device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 139392MB (285474816 512 byte sectors: 255H 63S/T 17769C)
ses0 at mpt0 bus 0 scbus0 target 8 lun 0
ses0: <DP BACKPLANE 1.07> Fixed Enclosure Services SCSI-5 device
ses0: 300.000MB/s transfers
ses0: SCSI-3 SES Device
pass2 at mpt0 bus 1 scbus1 target 0 lun 0
pass2: <SEAGATE ST3146356SS HS10> Fixed Uninstalled SCSI-5 device
pass2: 300.000MB/s transfers
pass2: Command Queueing enabled
SMP: AP CPU #1 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #2 Launched!
Root mount waiting for: usbus2
ugen2.2: <vendor 0x0424> at usbus2
uhub8: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on
usbus2
ugen0.2: <Avocent> at usbus0
ukbd0: <EP1 Interrupt> on usbus0
kbd2 at ukbd0
ums0: <EP2 Interrupt> on usbus0
ums0: 5 buttons and [XYZ] coordinates ID=1
Root mount waiting for: usbus2
uhub8: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/da0s1a
>
> Concordo Renato!
>
> Conversando direitinho com o gerente de contas da Dell o preço baixa
> muito! Nunca pago o que mostra lá no site.
>
> Sem falar que trabalhar com servidor "homologado" é outra conversa...
> tudo funfa direitinho!
>
> O último frankstein que tem por aqui morrerá em breve... estou com 2
> Dell usando ESXi.
manda o contato do gerente de contas, ou o caminho das pedras !!
estou pra comprar 2 dell, T410, e tá salgado. Como perguntei aqui na lista
e falaram bem, vai ser ele até agora (a turma não reclamou do preço) pra
rodar o FreeBSD 8.1R nativo.
valeu,
matheus
--
We will call you cygnus,
The God of balance you shall be
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
http://en.wikipedia.org/wiki/Posting_style
-------------------------
Histórico: http://www.fug.com.br/historico/html/freebsd/
Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
-------------------------
Histórico: http://www.fug.com.br/historico/html/freebsd/
Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
