2009/6/23 eduwu...@gmail.com <eduwu...@gmail.com>:
> Pessoal, tranquilo.
>
> O servidor chega essa semana.
>
> Daqui alguns dias, posto como ficou.
>
o nosso chegou aqui, fiz apenas a instalacao e estou
comecando a fazer as customizacoes, a performance está
muito boa de inicio, bem diferente de uma SAS6 que peguei,
este agora está com PERC, segue dmesg:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May 1 07:18:07 UTC 2009
r...@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E6305 @ 1.86GHz (1866.67-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 2128846848 (2030 MB)
avail memory = 2052648960 (1957 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
MADT: Ignoring bogus I/O APIC ID 3ioapic1: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 64-87 on motherboard
kbd1 at kbdmux0
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib1
mfi0: <Dell PERC 6> port 0xec00-0xecff mem
0xdfa80000-0xdfabffff,0xdfac0000-0xdfafffff irq 16 at device 0.0 on
pci3
mfi0: Megaraid SAS driver Ver 3.00
mfi0: 267 (299182915s/0x0020/info) - Shutdown command received from host
mfi0: 268 (boot + 3s/0x0020/info) - Firmware initialization started
(PCI ID 0060/1000/1f0b/1028)
mfi0: 269 (boot + 3s/0x0020/info) - Firmware version 1.21.02-0528
mfi0: 270 (boot + 3s/0x0008/info) - Battery Present
mfi0: 271 (boot + 3s/0x0020/info) - Controller hardware revision ID (0x0)
mfi0: 272 (boot + 3s/0x0020/info) - Package version 6.1.1-0047
mfi0: 273 (boot + 3s/0x0020/info) - Board Revision
mfi0: 274 (boot + 21s/0x0002/info) - Inserted: PD 00(e0xff/s0)
mfi0: 275 (boot + 21s/0x0002/info) - Inserted: PD 00(e0xff/s0) Info:
enclPd=ffff, scsiType=0, portMap=00,
sasAddr=5000c500128e3c99,0000000000000000
mfi0: 276 (boot + 21s/0x0002/info) - Inserted: PD 01(e0xff/s1)
mfi0: 277 (boot + 21s/0x0002/info) - Inserted: PD 01(e0xff/s1) Info:
enclPd=ffff, scsiType=0, portMap=01,
sasAddr=5000c500128e3a9d,0000000000000000
mfi0: [ITHREAD]
pcib2: <PCI-PCI bridge> at device 3.0 on pci0
pci4: <PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci5: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xdcc0-0xdcdf
mem 0xdfb80000-0xdfb9ffff,0xdfba0000-0xdfbbffff irq 16 at device 0.0
on pci5
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:15:17:bb:8d:04
em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xdce0-0xdcff
mem 0xdfbc0000-0xdfbdffff,0xdfbe0000-0xdfbfffff irq 17 at device 0.1
on pci5
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:15:17:bb:8d:05
pcib4: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci6: <ACPI PCI bus> on pcib4
em2: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xccc0-0xccdf
mem 0xdfc80000-0xdfc9ffff,0xdfca0000-0xdfcbffff irq 16 at device 0.0
on pci6
em2: Using MSI interrupt
em2: [FILTER]
em2: Ethernet address: 00:15:17:bb:80:78
em3: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xcce0-0xccff
mem 0xdfcc0000-0xdfcdffff,0xdfce0000-0xdfcfffff irq 17 at device 0.1
on pci6
em3: Using MSI interrupt
em3: [FILTER]
em3: Ethernet address: 00:15:17:bb:80:79
pcib5: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci7: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci8: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci9: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci9
pci10: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci1: <ACPI PCI bus> on pcib9
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
0xa200> mem 0xdfdf0000-0xdfdfffff irq 16 at device 0.0 on pci1
miibus0: <MII bus> on bge0
brgphy0: <BCM5722 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge0: Ethernet address: 00:1e:c9:28:30:66
bge0: [ITHREAD]
pcib10: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci2: <ACPI PCI bus> on pcib10
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
0xa200> mem 0xdfef0000-0xdfefffff irq 17 at device 0.0 on pci2
miibus1: <MII bus> on bge1
brgphy1: <BCM5722 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge1: Ethernet address: 00:1e:c9:28:30:67
bge1: [ITHREAD]
uhci0: <UHCI (generic) USB controller> port 0xac80-0xac9f irq 21 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xaca0-0xacbf irq 20 at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xacc0-0xacdf irq 21 at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xace0-0xacff irq 20 at
device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdf9ffc00-0xdf9fffff
irq 21 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr
2> on uhub4
uhub5: single transaction translator
uhub5: 2 ports with 2 removable, self powered
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> port 0xbc00-0xbcff mem
0xd0000000-0xd7ffffff,0xdfff0000-0xdfffffff irq 19 at device 7.0 on
pci11
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9 SATA300 controller> port
0xac20-0xac27,0xac10-0xac13,0xac28-0xac2f,0xac14-0xac17,0xac40-0xac4f,0xac50-0xac5f
irq 23 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
atapci1: <Intel ICH9 SATA300 controller> port
0xac30-0xac37,0xac18-0xac1b,0xac38-0xac3f,0xac1c-0xac1f,0xac60-0xac6f,0xac70-0xac7f
irq 22 at device 31.5 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 722072206000722
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 722072206000722
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcbfff,0xec000-0xeffff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: <vendor 0x0566 product 0x3002, class 0/0, rev 1.10/1.01, addr 2> on uhub2
kbd2 at ukbd0
uhid0: <vendor 0x0566 product 0x3002, class 0/0, rev 1.10/1.01, addr 2> on uhub2
Timecounters tick every 1.000 msec
acd0: DVDROM <HL-DT-STDVD-ROM DH10N/0D08> at ata4-master SATA150
mfi0: 278 (299182958s/0x0020/info) - Time established as 06/24/09
18:22:38; (35 seconds since power on)
mfi0: 279 (299182991s/0x0008/info) - Battery temperature is normal
mfi0: 280 (299182991s/0x0008/info) - Battery started charging
mfi0: 281 (299182991s/0x0008/info) - Current capacity of the battery
is above threshold
mfid0: <MFI Logical Disk> on mfi0
mfid0: 69376MB (142082048 sectors) RAID volume '' is optimal
SMP: AP CPU #1 Launched!
GEOM_LABEL: Label for provider mfid0s1a is ufsid/4a426cb16ca36649.
GEOM_LABEL: Label for provider mfid0s1d is ufsid/4a426cb17d681c5e.
GEOM_LABEL: Label for provider mfid0s1e is ufsid/4a426cb1e317bfc7.
GEOM_LABEL: Label for provider mfid0s1f is ufsid/4a426cb1676f7b78.
GEOM_LABEL: Label for provider mfid0s1g is ufsid/4a426cb1cec6637d.
Trying to mount root from ufs:/dev/mfid0s1a
GEOM_LABEL: Label ufsid/4a426cb16ca36649 removed.
GEOM_LABEL: Label for provider mfid0s1a is ufsid/4a426cb16ca36649.
GEOM_LABEL: Label ufsid/4a426cb1cec6637d removed.
GEOM_LABEL: Label for provider mfid0s1g is ufsid/4a426cb1cec6637d.
GEOM_LABEL: Label ufsid/4a426cb1e317bfc7 removed.
GEOM_LABEL: Label for provider mfid0s1e is ufsid/4a426cb1e317bfc7.
GEOM_LABEL: Label ufsid/4a426cb1676f7b78 removed.
GEOM_LABEL: Label for provider mfid0s1f is ufsid/4a426cb1676f7b78.
GEOM_LABEL: Label ufsid/4a426cb17d681c5e removed.
GEOM_LABEL: Label for provider mfid0s1d is ufsid/4a426cb17d681c5e.
GEOM_LABEL: Label ufsid/4a426cb16ca36649 removed.
GEOM_LABEL: Label ufsid/4a426cb1cec6637d removed.
GEOM_LABEL: Label ufsid/4a426cb1e317bfc7 removed.
GEOM_LABEL: Label ufsid/4a426cb1676f7b78 removed.
GEOM_LABEL: Label ufsid/4a426cb17d681c5e removed.
mfi0: 282 (299184421s/0x0008/info) - Battery charge complete
-------------------------
Histórico: http://www.fug.com.br/historico/html/freebsd/
Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
