On Sun, 25 Jan 2009 18:57:51 -0200, Matheus Cucoloto
<matheuscucol...@gmail.com> wrote:
> Pessoal... Sério mesmo que ninguem ai usa FreeBSD em um Hp ML350?
>
>
>
>> On Thu, Jan 22, 2009 at 9:48 AM, Matheus Cucoloto
>> <matheuscucol...@gmail.com> wrote:
>> > Pessoal....
>> >
>> > To com o FreeBSD 7.1-stable em um HP ML 350 g5 e estou enfrentando
>> > lentidão extrema no IO da controladora.
>> >
>> >
>> > Com Raid 0 consigo o seguinte IO em um dump.
>> >
>> > marte# iostat -w 1 -c 1000 da0
>> > tty da0 cpu
>> > tin tout KB/t tps MB/s us ni sy in id
>> > 0 9 30.41 10 0.29 1 0 0 4 95
>> > 0 129 64.00 153 9.56 0 0 0 3 97
>> > 0 43 64.00 153 9.55 0 0 1 5 94
>> > 0 43 64.00 153 9.55 0 0 1 4 95
>> > 0 43 63.37 152 9.40 0 0 1 6 93
>> > 0 43 63.37 152 9.40 0 0 0 5 95
>> > 0 43 64.00 153 9.55 0 0 2 6 92
>> > 0 43 64.00 153 9.55 0 0 0 4 96
>> > 0 43 63.69 154 9.57 0 0 1 4 95
>> > 0 43 63.38 154 9.52 0 0 0 4 95
>> > 0 43 62.80 155 9.50 0 0 1 3 96
>> > 0 43 64.00 153 9.55 0 0 0 2 98
>> > 0 43 63.69 154 9.57 0 0 1 6 94
>> > 0 43 61.85 156 9.41 0 0 1 2 98
>> >
>> > Em Raid1 consigo o seguinte () em um dump.
>> >
>> > marte# iostat -c 1000 -w 1 da0
>> > tty da0 cpu
>> > tin tout KB/t tps MB/s us ni sy in id
>> > 1 688 6.48 71 0.45 0 0 1 0 99
>> > 0 561 55.12 114 6.13 0 0 1 0 98
>> > 0 459 37.02 114 4.12 0 0 1 0 99
>> > 0 425 34.52 115 3.87 0 0 1 0 99
>> > 0 396 40.32 114 4.49 0 0 1 0 99
>> > 0 353 25.21 119 2.93 0 0 1 0 99
>> > 0 420 39.19 114 4.36 0 0 0 0 100
>> > 0 435 36.80 113 4.05 0 0 1 0 99
>> > 0 454 40.60 117 4.64 0 0 1 0 99
>> > 0 360 34.14 116 3.86 0 0 0 0 99
>> > 0 442 39.00 116 4.42 0 0 0 0 99
>> > 0 353 34.69 118 3.99 0 0 0 0 99
>> > 0 541 42.55 112 4.65 0 0 1 0 99
>> > 0 408 32.27 117 3.68 0 0 0 0 99
>> > 0 418 35.75 113 3.94 0 0 0 0 100
>> > 0 285 44.03 116 4.98 0 0 0 0 100
>> > 0 96 28.09 112 3.07 0 0 2 0 98
>> > 0 43 7.52 126 0.92 0 0 0 0 100
>> >
>> > Em uma maquina normal isso é superado umas 30x mais....
>> >
>> >
>> > Ja dei uma pesquisada mas nada...
>> >
>> > Pergunto...
>> >
>> > Alguem ai ja teve problemas com este hardware?
Amigo Matheus, tenho uma controladora igual a sua num HP DL 180 G5.
# pciconf -l -v
ci...@pci0:7:8:0: class=0x010400 card=0x3212103c chip=0x3238103c
rev=0x00 hdr=0x00
vendor = 'Hewlett-Packard Company'
device = 'Smart Array E200/E200i Controller'
class = mass storage
subclass = RAID
Em um teste parecido com o seu, num servidor em produção obetive com um
"dd if=/dev/random of=/montagem/xxx.teste" o seguinte resultado:
# iostat -c 1000 -w 1 da1
tty da1 cpu
tin tout KB/t tps MB/s us ni sy in id
0 4 16.70 21 0.35 2 0 1 0 97
0 128 52.78 677 34.91 3 0 27 1 69
0 43 62.82 478 29.33 1 0 26 0 73
0 43 62.57 506 30.92 1 0 26 1 72
0 43 62.91 503 30.90 2 0 26 1 72
0 43 61.33 574 34.40 3 0 26 0 71
0 43 60.32 585 34.47 4 0 25 1 70
0 43 61.83 549 33.16 3 0 27 1 70
0 43 57.02 591 32.94 2 0 24 1 73
0 43 63.29 508 31.41 4 0 25 0 71
0 43 58.98 537 30.90 2 0 25 1 72
0 43 60.71 573 33.96 3 0 27 2 68
0 43 54.15 723 38.21 3 0 24 0 72
1 165 62.91 403 24.76 2 0 21 1 77
0 43 8.86 14 0.12 2 0 1 0 97
^C
>> >
>> > Como eu posso reportar o time de desenvolvimento do driver sobre este
> problema.
>> >
>> > Com outro SO a taxa de transferencia é extraordinariamente maior.
>> >
>> > marte# pciconf -vl
>> > hos...@pci0:0:0:0: class=0x060000 card=0x31fd103c chip=0x25d08086
>> > rev=0xb1 hdr=0x00
>> > vendor = 'Intel Corporation'
>> > device = '5000Z Chipset Memory Controller Hub'
>> > class = bridge
>> > subclass = HOST-PCI
>> > pc...@pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x25f78086
>> > rev=0xb1 hdr=0x01
>> > vendor = 'Intel Corporation'
>> > device = '5000 Series Chipset PCIe x8 Port 2-3'
>> > class = bridge
>> > subclass = PCI-PCI
>> > pc...@pci0:0:3:0: class=0x060400 card=0x00000000 chip=0x25e38086
>> > rev=0xb1 hdr=0x01
>> > vendor = 'Intel Corporation'
>> > device = '5000 Series Chipset PCIe x4 Port 3'
>> > class = bridge
>> > subclass = PCI-PCI
>> > pc...@pci0:0:4:0: class=0x060400 card=0x00000000 chip=0x25e48086
>> > rev=0xb1 hdr=0x01
>> > vendor = 'Intel Corporation'
>> > device = '5000 Series Chipset PCIe x4 Port 4'
>> > class = bridge
>> > subclass = PCI-PCI
>> > pc...@pci0:0:5:0: class=0x060400 card=0x00000000 chip=0x25e58086
>> > rev=0xb1 hdr=0x01
>> > vendor = 'Intel Corporation'
>> > device = '5000 Series Chipset PCIe x4 Port 5'
>> > class = bridge
>> > subclass = PCI-PCI
>> > hos...@pci0:0:16:0: class=0x060000 card=0x31fd103c chip=0x25f08086
>> > rev=0xb1 hdr=0x00
>> > vendor = 'Intel Corporation'
>> > device = '5000 Series Chipset Error Reporting Registers'
>> > class = bridge
>> > subclass = HOST-PCI
>> > hos...@pci0:0:16:1: class=0x060000 card=0x31fd103c chip=0x25f08086
>> > rev=0xb1 hdr=0x00
>> > vendor = 'Intel Corporation'
>> > device = '5000 Series Chipset Error Reporting Registers'
>> > class = bridge
>> > subclass = HOST-PCI
>> > hos...@pci0:0:16:2: class=0x060000 card=0x31fd103c chip=0x25f08086
>> > rev=0xb1 hdr=0x00
>> > vendor = 'Intel Corporation'
>> > device = '5000 Series Chipset Error Reporting Registers'
>> > class = bridge
>> > subclass = HOST-PCI
>> > hos...@pci0:0:17:0: class=0x060000 card=0x31fd103c chip=0x25f18086
>> > rev=0xb1 hdr=0x00
>> > vendor = 'Intel Corporation'
>> > device = '5000 Series Chipset Reserved Registers'
>> > class = bridge
>> > subclass = HOST-PCI
>> > hos...@pci0:0:19:0: class=0x060000 card=0x31fd103c chip=0x25f38086
>> > rev=0xb1 hdr=0x00
>> > vendor = 'Intel Corporation'
>> > device = '5000 Series Chipset Reserved Registers'
>> > class = bridge
>> > subclass = HOST-PCI
>> > hos...@pci0:0:21:0: class=0x060000 card=0x31fd103c chip=0x25f58086
>> > rev=0xb1 hdr=0x00
>> > vendor = 'Intel Corporation'
>> > device = '5000 Series Chipset FBD Registers'
>> > class = bridge
>> > subclass = HOST-PCI
>> > hos...@pci0:0:22:0: class=0x060000 card=0x31fd103c chip=0x25f68086
>> > rev=0xb1 hdr=0x00
>> > vendor = 'Intel Corporation'
>> > device = '5000 Series Chipset FBD Registers'
>> > class = bridge
>> > subclass = HOST-PCI
>> > pci...@pci0:0:28:0: class=0x060400 card=0x00000000 chip=0x26908086
>> > rev=0x09 hdr=0x01
>> > vendor = 'Intel Corporation'
>> > device = '631xESB/632xESB/3100 PCIe Root Port 1'
>> > class = bridge
>> > subclass = PCI-PCI
>> > no...@pci0:0:29:0: class=0x0c0300 card=0x31fe103c chip=0x26888086
>> > rev=0x09 hdr=0x00
>> > vendor = 'Intel Corporation'
>> > device = '631xESB/632xESB/3100 Chipset USB Universal Host
> Controller'
>> > class = serial bus
>> > subclass = USB
>> > no...@pci0:0:29:1: class=0x0c0300 card=0x31fe103c chip=0x26898086
>> > rev=0x09 hdr=0x00
>> > vendor = 'Intel Corporation'
>> > device = '631xESB/632xESB/3100 Chipset USB Universal Host
> Controller'
>> > class = serial bus
>> > subclass = USB
>> > no...@pci0:0:29:2: class=0x0c0300 card=0x31fe103c chip=0x268a8086
>> > rev=0x09 hdr=0x00
>> > vendor = 'Intel Corporation'
>> > device = '631xESB/632xESB/3100 Chipset USB Universal Host
> Controller'
>> > class = serial bus
>> > subclass = USB
>> > no...@pci0:0:29:3: class=0x0c0300 card=0x31fe103c chip=0x268b8086
>> > rev=0x09 hdr=0x00
>> > vendor = 'Intel Corporation'
>> > device = '631xESB/632xESB/3100 Chipset USB Universal Host
> Controller'
>> > class = serial bus
>> > subclass = USB
>> > no...@pci0:0:29:7: class=0x0c0320 card=0x31fe103c chip=0x268c8086
>> > rev=0x09 hdr=0x00
>> > vendor = 'Intel Corporation'
>> > device = '631xESB/632xESB/3100 Chipset USB2 Enhanced Host
> Controller'
>> > class = serial bus
>> > subclass = USB
>> > pci...@pci0:0:30:0: class=0x060401 card=0x31fe103c chip=0x244e8086
>> > rev=0xd9 hdr=0x01
>> > vendor = 'Intel Corporation'
>> > device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub
>> > Interface to PCI Bridge'
>> > class = bridge
>> > subclass = PCI-PCI
>> > is...@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x26708086
>> > rev=0x09 hdr=0x00
>> > vendor = 'Intel Corporation'
>> > device = '631xESB/632xESB/3100 LPC Interface Controller'
>> > class = bridge
>> > subclass = PCI-ISA
>> > atap...@pci0:0:31:2: class=0x010180 card=0x32010e11 chip=0x26808086
>> > rev=0x09 hdr=0x00
>> > vendor = 'Intel Corporation'
>> > device = '631xESB/632xESB/3100 Serial ATA Storage Controller'
>> > class = mass storage
>> > subclass = ATA
>> > pc...@pci0:4:0:0: class=0x060400 card=0x00000000 chip=0x35008086
>> > rev=0x01 hdr=0x01
>> > vendor = 'Intel Corporation'
>> > device = '631xESB/632xESB PCIe Upstream Port'
>> > class = bridge
>> > subclass = PCI-PCI
>> > pc...@pci0:4:0:3: class=0x060400 card=0x00000000 chip=0x350c8086
>> > rev=0x01 hdr=0x01
>> > vendor = 'Intel Corporation'
>> > device = '631xESB/632xESB PCIe to PCI-X Bridge'
>> > class = bridge
>> > subclass = PCI-PCI
>> > pc...@pci0:5:0:0: class=0x060400 card=0x00000000 chip=0x35108086
>> > rev=0x01 hdr=0x01
>> > vendor = 'Intel Corporation'
>> > device = '631xESB/632xESB PCIe Downstream Port E1'
>> > class = bridge
>> > subclass = PCI-PCI
>> > pc...@pci0:5:1:0: class=0x060400 card=0x00000000 chip=0x35148086
>> > rev=0x01 hdr=0x01
>> > vendor = 'Intel Corporation'
>> > device = '631xESB/632xESB PCIe Downstream Port E2'
>> > class = bridge
>> > subclass = PCI-PCI
>> > pc...@pci0:18:0:0: class=0x060400 card=0x00000000 chip=0x01031166
>> > rev=0xb4 hdr=0x01
>> > vendor = 'ServerWorks (Was: Reliance Computer Corp)'
>> > device = 'BCM5715 Broadcom dual gigabit, pci bridge'
>> > class = bridge
>> > subclass = PCI-PCI
>> > pci...@pci0:19:4:0: class=0x060400 card=0x00000000 chip=0x01041166
>> > rev=0xb2 hdr=0x01
>> > vendor = 'ServerWorks (Was: Reliance Computer Corp)'
>> > device = 'HT1000 PCI/PCI-X bridge'
>> > class = bridge
>> > subclass = PCI-PCI
>> > ci...@pci0:19:8:0: class=0x010400 card=0x3211103c chip=0x3238103c
>> > rev=0x00 hdr=0x00
>> > vendor = 'Hewlett-Packard Company'
>> > device = 'Smart Array E200/E200i Controller'
>> > class = mass storage
>> > subclass = RAID
>> > pci...@pci0:2:0:0: class=0x060400 card=0x00000000 chip=0x01031166
>> > rev=0xc3 hdr=0x01
>> > vendor = 'ServerWorks (Was: Reliance Computer Corp)'
>> > device = 'BCM5715 Broadcom dual gigabit, pci bridge'
>> > class = bridge
>> > subclass = PCI-PCI
>> > b...@pci0:3:0:0: class=0x020000 card=0x7038103c chip=0x164c14e4
>> > rev=0x12 hdr=0x00
>> > vendor = 'Broadcom Corporation'
>> > device = '5708C Broadcom NetXtreme II Gigabit Ethernet Adapter'
>> > class = network
>> > subclass = ethernet
>> > vgap...@pci0:1:3:0: class=0x030000 card=0x31fb103c chip=0x515e1002
>> > rev=0x02 hdr=0x00
>> > vendor = 'ATI Technologies Inc'
>> > device = 'Radeon ES1000 Radeon ES1000'
>> > class = display
>> > subclass = VGA
>> > no...@pci0:1:4:0: class=0x088000 card=0x3305103c chip=0xb2030e11
>> > rev=0x03 hdr=0x00
>> > vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
>> > device = 'iLo Integrated Lights Out Processor'
>> > class = base peripheral
>> > no...@pci0:1:4:2: class=0x088000 card=0x3305103c chip=0xb2040e11
>> > rev=0x03 hdr=0x00
>> > vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
>> > device = 'iLo Integrated Lights Out Processor'
>> > class = base peripheral
>> > no...@pci0:1:4:4: class=0x0c0300 card=0x3305103c chip=0x3300103c
>> > rev=0x00 hdr=0x00
>> > vendor = 'Hewlett-Packard Company'
>> > class = serial bus
>> > subclass = USB
>> > no...@pci0:1:4:6: class=0x0c0701 card=0x3305103c chip=0x3302103c
>> > rev=0x00 hdr=0x00
>> > vendor = 'Hewlett-Packard Company'
>> > device = 'unknown unknown'
>> > class = serial bus
>> >
>> >
>> > FreeBSD 7.1-STABLE #0: Wed Jan 21 23:43:35 BRST 2009
>> >
> math...@marte.institutosaopaulo.com.br:/usr/src/sys/i386/compile/MARTE
>> > Timecounter "i8254" frequency 1193182 Hz quality 0
>> > CPU: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz (2333.43-MHz
> 686-class CPU)
>> > Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
>> >
>
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>> >
>
Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
>> > AMD Features=0x20000000<LM>
>> > AMD Features2=0x1<LAHF>
>> > Cores per package: 4
>> > real memory = 4831834112 (4607 MB)
>> > avail memory = 4185960448 (3992 MB)
>> > ACPI APIC Table: <HP ProLiant>
>> > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>> > cpu0 (BSP): APIC ID: 0
>> > cpu1 (AP): APIC ID: 1
>> > cpu2 (AP): APIC ID: 2
>> > cpu3 (AP): APIC ID: 3
>> > ioapic0 <Version 2.0> irqs 0-23 on motherboard
>> > ioapic1 <Version 2.0> irqs 24-47 on motherboard
>> > registered firmware set <isp_1040>
>> > registered firmware set <isp_1040_it>
>> > registered firmware set <isp_1080>
>> > registered firmware set <isp_1080_it>
>> > registered firmware set <isp_12160>
>> > registered firmware set <isp_12160_it>
>> > registered firmware set <isp_2100>
>> > registered firmware set <isp_2200>
>> > registered firmware set <isp_2300>
>> > registered firmware set <isp_2322>
>> > registered firmware set <isp_2400>
>> > netsmb_dev: loaded
>> > kbd1 at kbdmux0
>> > acpi0: <HP ProLiant> on motherboard
>> > acpi0: [ITHREAD]
>> > acpi0: Power Button (fixed)
>> > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>> > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
>> > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff
> on acpi0
>> > Timecounter "HPET" frequency 14318180 Hz quality 900
>> > pcib0: <ACPI Host-PCI bridge> on acpi0
>> > pci0: <ACPI PCI bus> on pcib0
>> > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
>> > pci4: <ACPI PCI bus> on pcib1
>> > pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci4
>> > pci5: <ACPI PCI bus> on pcib2
>> > pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci5
>> > pci6: <ACPI PCI bus> on pcib3
>> > pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci5
>> > pci9: <ACPI PCI bus> on pcib4
>> > pcib5: <ACPI PCI-PCI bridge> at device 0.3 on pci4
>> > pci12: <ACPI PCI bus> on pcib5
>> > pcib6: <PCI-PCI bridge> at device 3.0 on pci0
>> > pci23: <PCI bus> on pcib6
>> > pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci0
>> > pci15: <ACPI PCI bus> on pcib7
>> > pcib8: <ACPI PCI-PCI bridge> at device 5.0 on pci0
>> > pci18: <ACPI PCI bus> on pcib8
>> > pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci18
>> > pci19: <ACPI PCI bus> on pcib9
>> > pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci19
>> > pci20: <ACPI PCI bus> on pcib10
>> > ciss0: <HP Smart Array E200i> port 0x4000-0x40ff mem
>> > 0xfdf80000-0xfdffffff,0xfdf70000-0xfdf77fff irq 19 at device 8.0 on
>> > pci19
>> > ciss0: [ITHREAD]
>> > pcib11: <ACPI PCI-PCI bridge> at device 28.0 on pci0
>> > pci2: <ACPI PCI bus> on pcib11
>> > pcib12: <PCI-PCI bridge> at device 0.0 on pci2
>> > pci3: <PCI bus> on pcib12
>> > bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
>> > 0xfa000000-0xfbffffff irq 16 at device 0.0 on pci3
>> > miibus0: <MII bus> on bce0
>> > brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
>> > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
>> > 1000baseT-FDX, auto
>> > bce0: Ethernet address: 00:21:5a:47:84:88
>> > bce0: [ITHREAD]
>> > bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
>> > (0x01090605); Flags( SPLT MFW MSI )
>> > pci0: <serial bus, USB> at device 29.0 (no driver attached)
>> > pci0: <serial bus, USB> at device 29.1 (no driver attached)
>> > pci0: <serial bus, USB> at device 29.2 (no driver attached)
>> > pci0: <serial bus, USB> at device 29.3 (no driver attached)
>> > pci0: <serial bus, USB> at device 29.7 (no driver attached)
>> > pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>> > pci1: <ACPI PCI bus> on pcib13
>> > vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem
>> > 0xf0000000-0xf7ffffff,0xf9ff0000-0xf9ffffff irq 23 at device 3.0 on
>> > pci1
>> > pci1: <base peripheral> at device 4.0 (no driver attached)
>> > pci1: <base peripheral> at device 4.2 (no driver attached)
>> > pci1: <serial bus, USB> at device 4.4 (no driver attached)
>> > pci1: <serial bus> at device 4.6 (no driver attached)
>> > isab0: <PCI-ISA bridge> at device 31.0 on pci0
>> > isa0: <ISA bus> on isab0
>> > atapci0: <Intel 63XXESB2 SATA300 controller> port
>> > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 17 at device 31.2
>> > on pci0
>> > ata0: <ATA channel 0> on atapci0
>> > ata0: [ITHREAD]
>> > ata1: <ATA channel 1> on atapci0
>> > ata1: [ITHREAD]
>> > acpi_tz0: <Thermal Zone> on acpi0
>> > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>> > atkbd0: <AT Keyboard> irq 1 on atkbdc0
>> > kbd0 at atkbd0
>> > atkbd0: [GIANT-LOCKED]
>> > atkbd0: [ITHREAD]
>> > psm0: <PS/2 Mouse> irq 12 on atkbdc0
>> > psm0: [GIANT-LOCKED]
>> > psm0: [ITHREAD]
>> > psm0: model Generic PS/2 mouse, device ID 0
>> > sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
>> > sio0: type 16550A
>> > sio0: [FILTER]
>> > cpu0: <ACPI CPU> on acpi0
>> > est0: <Enhanced SpeedStep Frequency Control> on cpu0
>> > est: CPU supports Enhanced Speedstep, but is not recognized.
>> > est: cpu_vendor GenuineIntel, msr 719071906000719
>> > device_attach: est0 attach returned 6
>> > p4tcc0: <CPU Frequency Thermal Control> on cpu0
>> > cpu1: <ACPI CPU> on acpi0
>> > est1: <Enhanced SpeedStep Frequency Control> on cpu1
>> > est: CPU supports Enhanced Speedstep, but is not recognized.
>> > est: cpu_vendor GenuineIntel, msr 719071906000719
>> > device_attach: est1 attach returned 6
>> > p4tcc1: <CPU Frequency Thermal Control> on cpu1
>> > cpu2: <ACPI CPU> on acpi0
>> > est2: <Enhanced SpeedStep Frequency Control> on cpu2
>> > est: CPU supports Enhanced Speedstep, but is not recognized.
>> > est: cpu_vendor GenuineIntel, msr 719071906000719
>> > device_attach: est2 attach returned 6
>> > p4tcc2: <CPU Frequency Thermal Control> on cpu2
>> > cpu3: <ACPI CPU> on acpi0
>> > est3: <Enhanced SpeedStep Frequency Control> on cpu3
>> > est: CPU supports Enhanced Speedstep, but is not recognized.
>> > est: cpu_vendor GenuineIntel, msr 719071906000719
>> > device_attach: est3 attach returned 6
>> > p4tcc3: <CPU Frequency Thermal Control> on cpu3
>> > orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xe6000-0xe7fff pnpid
>> > ORM0000 on isa0
>> > sc0: <System console> at flags 0x100 on isa0
>> > sc0: VGA <16 virtual consoles, flags=0x300>
>> > sio1 at port 0x2f8-0x2ff irq 3 on isa0
>> > sio1: type 16550A
>> > sio1: [FILTER]
>> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
>> > Timecounters tick every 1.000 msec
>> > ipfw2 initialized, divert enabled, nat loadable, rule-based forwarding
>> > enabled, default to accept, logging limited to 1000 packets/entry by
>> > default
>> > acd0: DVDROM <HL-DT-STDVD-ROM GDRH20N/D8E4> at ata0-master SATA150
>> > da0 at ciss0 bus 0 target 0 lun 0
>> > da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-5 device
>> > da0: 135.168MB/s transfers
>> > da0: 476908MB (976707632 512 byte sectors: 255H 32S/T 65535C)
>> > SMP: AP CPU #1 Launched!
>> > SMP: AP CPU #2 Launched!
>> > SMP: AP CPU #3 Launched!
>> > Trying to mount root from ufs:/dev/da0s1a
>> > bce0: link state changed to UP
>
>
>
>
Jean Zanuzo
-------------------------
Histórico: http://www.fug.com.br/historico/html/freebsd/
Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
